Clear-Com Intercom System Basic Encore Wired Bundle with 6 Headsets

Clear-Com Basic Encore Wired System Bundle

• 1x Clear-Com MS-702 Main Intercom Station
• 6x Clear-Com CC-300 Single-Ear Standard Headset
• 6x Clear-Com RS-701 Encore Partyline Belt Pack

Clear-Com CC-300 Single-Ear Standard Headset
The CC-300 single-ear headset features high ambient-noise attenuation headphones and a hyper-cardioid dynamic microphone that provide high quality audio. The headset has a flexible design and a soft-ear pad to offer superior comfort. Able to rotate 300 degrees, the microphone boom acts as an on/off switch for quick microphone muting.

Clear-Com RS-701 Encore Partyline Belt Pack
The RS-701 is a single-channel analog belt pack with an XLR-3 line connector and XLR-4M headset connector. A microphone preamp with a dynamic range of 130dB enables intelligible voice communication for every volume level, from a whisper to a shout. The belt pack also combines high headroom, low-noise audio and shaped frequency contour (Clear-Com Sound) to deliver crystal-clear audio. The RS-701 is compatible with all Encore partyline products, as well as the PL-Pro line and other partyline systems via Encore interfaces.

Clear-Com MS-702 Main Intercom Station
Compact, feature-laden, single rack-space intercom main station supports up to 40 RS-701 beltpacks, 10 speaker stations or 12 headset stations on two channels.

Clear-Com CC-300 Features:

• Type: closed-back
• Driver: 40mm diameter, neodymium magnet, copper-clad aluminium wire voice coil
• Headphone frequency response: 40Hz - 20kHz
• Microhpone element: dynamic
• Microphone polar pattern: hyper-cardioid
• Microphone frequency response: 300Hz - 20kHz
• Open circuit sensitivity: -61.0 dB ±3.5 dB; at 1kHz, typical, 102 dB ±3 dB; at 1kHz typical
• Impedance: 400 ohms ±30%; at 1kHz typical
• Microphone: 200 ohms ±30%; at 1kHz typical
• Connector cable: 5ft (1.55m) long with 8-pin connector at headset end; 4-pin Female XLR
• Includes drawstring carry bag

Clear-Com RS-701 Features:

• Microphone pre-amplifier
• Microphone to Line (without limiter acting) frequency response: 280 – 15k Hz ± 3dB
• Microphone output to line – audio level (-50dBm Electret input): -9dBm
• Microphone output to line – distortion: <0.1%
• Microphone output to line – signal to noise: >65dB
• Clear-com sound: yes
• Headphone amplifier
• Frequency response – line to headphone: 150 – 20k Hz ± 3dB
• Headphone input from line – audio level (-9dBm Electret input): 3.5dBm
• Headphone input from line – distortion: <0.5%
• Headphone input from line – signal to noise: >50dB
• Earphone to mic – crosstalk: >80dB
• Sidetone – adjustment range (-80db mic input): >45dB
• Keypad indicators: power: green LED; talk: green LED; call: orange LED
• Connectors: intercom line: (2) 3-pin XLR–M–F: channel 1 2-Wire intercom channel pin 1: common; Pin 2: PL power (+28VDC); pin 3: line (Audio)
• Headset: 4-pin XLR–M: headset connector pin 1: mic - (Mic Common); pin 2: mic +; pin 3: spkr-; pin 4: spkr+ (&0.5*VCCDC supply between pin 4 & pin 1)
• Power requirements: 13mA Quiescent; 24mA average talk; 28mA Talk with signaling; DC voltage range: 12-30 VDC
• Operating temperature range: 0?C - 70?C (32?F - 158?F)
• Storage temperature range: 0?C - 70?C (32?F - 158?F)
• Relative humidity: 0 - 90% non condensing
• Dimensions: 3.4" x 4.5" x 1.7" / 86.4 mm x 114.3 mm x 43.2 mm (HxWxD)
• Weight: 0.66 lbs. / 0.30 kg

Clear-Com MS-702 Features:

• Channel A-B linking
• Program input with individual channel level controls
• Remote mic kill switch
• External relay circuit
• Stage announce
• Dimensions: 19" x 1.75" x 6.5" (WxHxD)