Clear-Com Intercom System Wired Plus Bundle with 8 Headsets

Clear-Com Wired Plus Bundle

Bundle Includes:

• 1x Clear-Com MS-702 Main Intercom Station
• 1x Clear-Com TW-47 2-Way Radio Interface
• 2x Clear-Com FL-7 Call Signal Flasher
• 2x Clear-Com HS-6 Telephone-Style Handset
• 4x Clear-Com RS-701 Encore Partyline Belt Pack
• 4x Clear-Com RS-702 2-Channel Analog Beltpack
• 8x Clear-Com CC-300 Single-Ear Standard Headset

Clear-Com CC-300 Single-Ear Standard Headset
The CC-300 single-ear headset features high ambient-noise attenuation headphones and a hyper-cardioid dynamic microphone that provide high quality audio. The headset has a flexible design and a soft-ear pad to offer superior comfort. Able to rotate 300 degrees, the microphone boom acts as an on/off switch for quick microphone muting.

Clear-Com RS-701 Encore Partyline Belt Pack
The RS-701 is a single-channel analog belt pack with an XLR-3 line connector and XLR-4M headset connector. A microphone preamp with a dynamic range of 130dB enables intelligible voice communication for every volume level, from a whisper to a shout. The belt pack also combines high headroom, low-noise audio and shaped frequency contour (Clear-Com Sound) to deliver crystal-clear audio. The RS-701 is compatible with all Encore partyline products, as well as the PL-Pro line and other partyline systems via Encore interfaces.

Clear-Com MS-702 Main Intercom Station
Compact, feature-laden, single rack-space intercom main station supports up to 40 RS-701 beltpacks, 10 speaker stations or 12 headset stations on two channels.

Clear-Com TW-47 2-Way Radio Interface
Clear-Com/RTS 2-Way Radio Interface, connects Clear-Com or RTS to any 2-way radio. Compatible with both Clear-Com and RTS, TW-47 connects virtually any set of walkie-talkies to anyone on the wired partyline intercom; simply use one walkie-talkie as a basestation. The base station radio is keyed from the intercom call signal. Extensive RF and EMI isolation prevents interference from entering the intercom system. Separate transmit and receive level controls are provided, along with audio level and transmitter keying indicators. The stand-alone interface is powered by the intercom line. *Note: Two-way radio must have headset and microphone jacks.

Clear-Com FL-7 Call Signal Flasher
New LED design with dimmer. Provides both a visual and audible indication of a call signal on the intercom channel. Frontpanel mode switch selects flasher, ring or both. Allows control of both tone volume and light brightness.

Clear-Com HS-6 Telephone-Style Handset
Telephone-style handset with wall/console mount hanger, push-to-talk switch. 6-foot coil cord with 4-pin female XLR connector.

Clear-Com RS-702 2-Channel Analog Beltpack
The RS-702 is a two-channel analog beltpack with an XLR-6 line connector and XLR-4M headset connector. A mic preamp with a dynamic range of 130 db enables intelligible voice communication for every volume level, from a whisper to a shout. The beltpack also combines high headroom, low-noise audio and shaped frequency contour (Clear-Com Sound) to deliver crystal-clear audio. The RS-702 is compatible with all Encore partyline products, as well as the PL-Pro line and other partyline systems via Encore interfaces.

Clear-Com CC-300 Features:

• Type: closed-back
• Driver: 40mm diameter, neodymium magnet, copper-clad aluminium wire voice coil
• Headphone frequency response: 40Hz - 20kHz
• Microhpone element: dynamic
• Microphone polar pattern: hyper-cardioid
• Microphone frequency response: 300Hz - 20kHz
• Open circuit sensitivity: -61.0 dB ±3.5 dB; at 1kHz, typical, 102 dB ±3 dB; at 1kHz typical
• Impedance: 400 ohms ±30%; at 1kHz typical
• Microphone: 200 ohms ±30%; at 1kHz typical
• Connector cable: 5ft (1.55m) long with 8-pin connector at headset end; 4-pin Female XLR
• Includes drawstring carry bag

Clear-Com RS-701 Features:

• Microphone pre-amplifier
• Microphone to Line (without limiter acting) frequency response: 280 – 15k Hz ± 3dB
• Microphone output to line – audio level (-50dBm Electret input): -9dBm
• Microphone output to line – distortion: <0.1%
• Microphone output to line – signal to noise: >65dB
• Clear-com sound: yes
• Headphone amplifier
• Frequency response – line to headphone: 150 – 20k Hz ± 3dB
• Headphone input from line – audio level (-9dBm Electret input): 3.5dBm
• Headphone input from line – distortion: <0.5%
• Headphone input from line – signal to noise: >50dB
• Earphone to mic – crosstalk: >80dB
• Sidetone – adjustment range (-80db mic input): >45dB
• Keypad indicators: power: green LED; talk: green LED; call: orange LED
• Connectors: intercom line: (2) 3-pin XLR–M–F: channel 1 2-Wire intercom channel pin 1: common; Pin 2: PL power (+28VDC); pin 3: line (Audio)
• Headset: 4-pin XLR–M: headset connector pin 1: mic - (Mic Common); pin 2: mic +; pin 3: spkr-; pin 4: spkr+ (&0.5*VCCDC supply between pin 4 & pin 1)
• Power requirements: 13mA Quiescent; 24mA average talk; 28mA Talk with signaling; DC voltage range: 12-30 VDC
• Operating temperature range: 0?C - 70?C (32?F - 158?F)
• Storage temperature range: 0?C - 70?C (32?F - 158?F)
• Relative humidity: 0 - 90% non condensing
• Dimensions: 3.4" x 4.5" x 1.7" / 86.4 mm x 114.3 mm x 43.2 mm (HxWxD)
• Weight: 0.66 lbs. / 0.30 kg

Clear-Com MS-702 Features:

• Channel A-B linking
• Program input with individual channel level controls
• Remote mic kill switch
• External relay circuit
• Stage announce
• Dimensions: 19" x 1.75" x 6.5" (WxHxD)

Clear-Com TW-47 Features:

• Radio to partyline:
• Frequency response: 200-20KHz ± 3dB
• Max gain: >=-5dBu
• Distortion: <=0.3%
• Noise: <=-70dBu
• Max level before clipping: >=+17dBu
• Green LED threshold: -22dBu ± 3dB
• Red LED threshold: -16dBu ± 3dB
• Input impedance: 400? ± 100?
• Partyline to radio:
• Frequency response: 200-8KHz ± 3dB
• Max gain J7 on, J8 on: -12dBu ± 3dB
• Max gain J7 off, J8 on: +2dBu ± 3dB
• Max gain J7 off, J8 off: +27dBu ± 3dB
• Distortion: <=0.3%
• Noise: <=-50dBu
• Max level before clipping: >=0dBu
• Power requirements:
• Input voltage range: 20-30VDC
• Quiescent current: <=40mA
• Current with audio: <=50mA
• Current with call: <=60mA
• Rear panel connectors: (1) XLR3F and (1) DB-9F
• Front panel controls and indicators:
• Transmit: (1) red LED
• Audio level hi: (1) red LED
• Audio level norm: (1) green LED
• Receive level adjust: (1) control
• Transmit level adjust: (1) control
• Dimensions: 1.63" x 4.75" x 5.15" / 41.4 mm x 121 mm x 131 mm (HxWxD)
• Weight: 1 lb. 4 oz. / 0.6 kg

Clear-Com FL-7 Features:

• Flash Rate 2 times/sec
• Flasher Lens 2.5" diameter red
• Rear Panel Connectors: One each XLR-3F and XLR-3M
• Power Requirements: Input Voltage: 20-30 VDC
• Input Current: (idle) <= 10mA
• Input Current: (max) <= 90mA
• Dimensions 2.5" x 4" x 5.0" (HxWxD)
• Weight: .91 lbs.

Clear-Com HS-6 Features:

• Single or Double Ear: Single ear handset
• Open or Enclosed Ear Phone: Open
• Weight: 330g
• Type of Microphone: Dynamic
• Impedance Mic/Earpiec