Clear-Com Intercom System Combo Wired Plus Wireless Bundle with 10 Headsets

Clear-Com Combo Wired Plus Wireless Bundle

• 1x Clear-Com BS410 Base Station for DX410 System
• 1x Clear-Com MS-702 Main Intercom Station
• 4x Clear-Com BP410 Belt Pack for DX410 Base Station
• 4x Clear-Com CC-15 Single Ear Noise-Canceling Headset
• 6x Clear-Com CC-300 Single-Ear Standard Headset
• 6x Clear-Com RS-701 Encore Partyline Belt Pack
• 1x Clear-Com AC50 4-Port Battery Charger for BAT50

Clear-Com BS410 Base Station for DX410 SystemThe BS410 is the base station for the DX410 wireless system, supporting up to 15 registered BP410 beltpacks and/or WH410 all-in-one wireless headsets. The system operates in the 2.4GHz frequency band and features high quality 7kHz wideband audio. The BS410 allows the option for audio bridging by combining 2-wire and 4-wire audio together on A or B channels.

Clear-Com MS-702 Main Intercom StationCompact, feature-laden, single rack-space intercom main station supports up to 40 RS-701 beltpacks, 10 speaker stations or 12 headset stations on two channels.

Clear-Com BP410 Belt Pack for DX410 Base StationThe BP410 is a rugged, light-weight, ergonomically designed beltback to be used with the BS410 base station. Single-channel operation allows any four beltpack and/or all-in-one wireless headset uses to engage in simultaneous, full-duplex communication. In dual-channel operation, three users may be in full-duplex with up to 13 additional users in listen-only mode. The BP410 has a rugged, over-mold, reinforced casing and long-lasting keypads with no mechanical switch. Using the BAT50 Li-Ion battery, the BP410 has up to 12 hours of battery life.

Clear-Com CC-15 Single Ear Noise-Canceling HeadsetCC-15 is a single-ear headset with noise-cancelling microphone for DX Series wireless intercom.

Clear-Com CC-300 Single-Ear Standard HeadsetThe CC-300 single-ear headset features high ambient-noise attenuation headphones and a hyper-cardioid dynamic microphone that provide high quality audio. The headset has a flexible design and a soft-ear pad to offer superior comfort. Able to rotate 300 degrees, the microphone boom acts as an on/off switch for quick microphone muting.

Clear-Com RS-701 Encore Partyline Belt PackThe RS-701 is a single-channel analog belt pack with an XLR-3 line connector and XLR-4M headset connector. A microphone preamp with a dynamic range of 130dB enables intelligible voice communication for every volume level, from a whisper to a shout. The belt pack also combines high headroom, low-noise audio and shaped frequency contour (Clear-Com Sound) to deliver crystal-clear audio. The RS-701 is compatible with all Encore partyline products, as well as the PL-Pro line and other partyline systems via Encore interfaces.

Clear-Com AC50 4-Port Battery Charger for BAT50The AC50 is a battery charger for the BAT50 batteries. The AC50 can charge up to four BAT50s simultaneous with additional reserve slots for four extra batteries. Charge time is 2.5 hours.

Clear-Com BS410 Features:

• Two-channels
• 7kHz wideband audio
• 2-wire and 4-wire bridging
• 2-wire auto-nulling
• Lost packet concealment
• Upgraded radio
• Supports up to 15 beltpacks and/or wireless headsets

Clear-Com MS-702 Features:

• Channel A-B linking
• Program input with individual channel level controls
• Remote mic kill switch
• External relay circuit
• Stage announce
• Dimensions: 19" x 1.75" x 6.5" (WxHxD)

Clear-Com BP410 Features:

• Two-channel
• 7kHz wideband audio
• Up to 15 beltpacks and/or all-in-one handsets on a single system
• Single or dual-channel operation
• Up to 12 hours of battery life
• Channels: 2 audio channels
• Frequency Range: 2400 MHz – 2483.5 MHz
• Frequency Response: 200 Hz – 7 kHz
• Antenna: Internal, horizontal/vertical diversity
• Headset Connector: 4-pin, mini-DIN
• Microphone: Electret
• Headset Output: 160mW into 32 Ohms
• Communication Security: 64-bit encryption
• System Distortion: <2%
• Controls: Power, Volume-Up, Volume-Down, A, B, ISO
• Indicators: Dual-color LED (red/green)
• Battery Requirements: 3.6V lithium-ion
• Battery Life: Up to 12 hours
• Antenna: Internal, Horizontal/Vertical diversity
• Transmitter
• Type: Frequency Hopping, Spread Spectrum (FHSS)
• Transmit Power: 100mW burst
• Modes: Momentary or Latch
• Type: Gaussian filtered FSK, TDMA
• Frequency Stability: 13 ppm
• Harmonics/Spurious: Exceeds FCC and ETSI specifications
• Receiver
• Type: Frequency Hopping, Spread Spectrum (FHSS)
• RF Sensitivity:
• Frequency Stability: 13 ppm
• Distortion: <2%
• Environmental: 32°F to +122°F (0°C to +50°C)
• Dimensions: 2.25 x 4.5 x 1 in (57.2 x 114.3 x 25.4 mm) (HxWxD)
• Weight: 7.4 oz (0.21 kg) including battery and pouch

Clear-Com CC-15 Features:

• Single Ear Headset
• Enclosed Ear Phone
• Leatherette
• Type of Microphone: Electret
• Microphone Unit:
• Impedance: 2.2k Ohm +30%
• Sensitivity: -51dB, +3dB (0dB - 1V/Pa, 1kHz)
• Speaker Unit:
• Impedance: 40 Ohms +15% (1kHz)
• Max Power: 100mW (2.0V RMS)
• Frequency Range: 20Hz - 20kHz (-15dB/1kHz)
• Output SPL: 106dB = +2.0dB
• Input: 1mW (0.2V RMS)
• Weight: 6oz (170g) without cable, 8.1oz (230g) with cable

Clear-Com CC-300 Features:

• Type: closed-back
• Driver: 40mm diameter, neodymium magnet, copper-clad aluminium wire voice coil
• Headphone frequency response: 40Hz - 20kHz
• Microhpone element: dynamic
• Microphone polar pattern: hyper-cardioid
• Microphone frequency response: 300Hz - 20kHz
• Open circuit sensitivity: -61.0 dB ±3.5 dB; at 1kHz, typical, 102 dB ±3 dB; at 1kHz typical
• Impedance: 400 ohms ±30%; at 1kHz typical
• Microphone: 200 ohms ±30%; at 1kHz typical
• Connector cable: 5ft (1.55m) long with 8-pin connector at headset end; 4-pin Female XLR
• Includes drawstring carry bag

Clear-Com RS-701 Features:

• Microphone pre-amplifier
• Microphone to Line (without limiter acting) frequency response: 280 – 15k Hz ± 3dB
• Microphone output to line – audio level (-50dBm Electret input): -9dBm
• Microphone output to line – distortion: <0.1%
• Microphone output to line – signal to noise: >65dB
• Clear-com sound: yes
• Headphone amplifier
• Frequency response – line to headphone: 150 – 20k Hz ± 3dB
• Headphone input from line – audio level (-9dBm Electret input): 3.5dBm
• Headphone input from line – distortion: <0.5%
• Headphone input from line – signal to noise: >50dB
• Earphone to mic – crosstalk: >80dB
• Sidetone – adjustment range (-80db mic input): >45dB
• Keypad indicators: power: green LED; talk: green LED; call: orange LED
• Connectors: intercom line: (2) 3-pin XLR–M–F: channel 1 2-Wire intercom channel pin 1: common; Pin 2: PL power (+28VDC); pin 3: line (Audio)
• Headset: 4-pin XLR–M: headset connector pin 1: mic - (Mic Common); pin 2: mic +; pin 3: spkr-; pin 4: spkr+