Neumann TLM-67 Multi-Pattern Microphone with K 67 Capsule and Wood Box
The TLM 67 captures the spirit of Neumann’s classic U 67, which defined the sound of the 1960s. But instead of electron tubes the TLM 67 relies on trouble free FET electronics with a special sound design for a gorgeous retro tone. Like its predecessor, the TLM 67 is a versatile studio workhorse with three polar patterns, pad and low cut options.
Features:
- Sound characteristics based on the legendary U 67
- Three switchable directional characteristics (omnidirectional, cardioid and figure-8)
- Switchable high-pass filter and pre-attenuation
- Transformerless circuit technology
- Dual-color exterior design
Specifications:
- Acoustical operating principle: Pressure gradient transducer
- Directional pattern: Omni/cardioid/figure-8
- Frequency range: 20 Hz to 20kHz
- Sensitivity at 1 kHz into 1 kohm: 10/18/9 mV/Pa
- Rated impedance: 50 ohms
- Rated load impedance: 1 kohms
- Equivalent noise level, CCIR: 29/24/30 dB
- Equivalent noise level, A-weighted: 16/11/17 dB-A
- Signal-to-noise ratio, CCIR (rel. 94 dB SPL): 65/70/64 dB (According to IEC 60268-1; CCIR-weighting according to CCIR 468-3, quasi peak; A-weighting according to IEC 61672-1, RMS)
- Maximum SPL (tube characteristic) for THD < 0.5 %: 110/105/111 dB
- Maximum SPL (tube characteristic) for THD < 5 %: 130/125/131 dB
- Maximum output voltage: -1 dBu
- Dynamic range of mic amp (A-weighted, 0.5%): 94 dB
- Dynamic range of mic amp (A-weighted, 5%): 104 dB (Measured as equivalent el. input signal, k2 dominant)
- Power supply: P48
- Matching connector: 3-pin XLR-F
- Weight: 490 g
- Diameter: 56 mm
- Length: 200 mm
- Included: Wooden Box
- Acoustical operating principle: Pressure gradient transducer
- Directional pattern: Omni/cardioid/figure-8
- Frequency range: 20 Hz to 20kHz
- Sensitivity at 1 kHz into 1 kohm: 10/18/9 mV/Pa
- Rated impedance: 50 ohms
- Rated load impedance: 1 kohms
- Equivalent noise level, CCIR: 29/24/30 dB
- Equivalent noise level, A-weighted: 16/11/17 dB-A
- Signal-to-noise ratio, CCIR (rel. 94 dB SPL): 65/70/64 dB (According to IEC 60268-1; CCIR-weighting according to CCIR 468-3, quasi peak; A-weighting according to IEC 61672-1, RMS)
- Maximum SPL (tube characteristic) for THD < 0.5 %: 110/105/111 dB
- Maximum SPL (tube characteristic) for THD < 5 %: 130/125/131 dB
- Maximum output voltage: -1 dBu
- Dynamic range of mic amp (A-weighted, 0.5%): 94 dB
- Dynamic range of mic amp (A-weighted, 5%): 104 dB (Measured as equivalent el. input signal, k2 dominant)
- Power supply: P48
- Matching connector: 3-pin XLR-F
- Weight: 490 g
- Diameter: 56 mm
- Length: 200 mm
- Included: Wooden Box
