Meyer Sound JM-1P RMS Arrayable Point-Source Speaker/Weather Protected/3-Pin/Remote Monitoring/Loop
The JM‑1P self-powered loudspeaker is a high-Q, arrayable loudspeaker suited for a wide range of applications. Utilizing Meyer Sound’s patented REM® technology and trapezoidal cabinet design, the JM‑1P can be deployed in tightly-packed array clusters to deliver coverage that is proportional to the number of units in the array. While JM‑1P point source arrays are optimized for horizontal installations, they can also be used vertically when necessary. With its scalable coverage and versatile QuickFly® rigging options, the JM‑1P loudspeaker can be used for touring, rental, and fixed installations.
Features:
- Tightly controlled coverage is scalable proportional to the number of arrayed units
- Exceptional size to power ratio
- QuickFly rigging offers the flexibility of both horizontal and vertical arrays
- Consistent and predictable array performance ensures accurate system design
Specifications:
- Acoustical:
- Operating Frequency Range: 53 Hz – 18 kHz
- Frequency Response: 56 Hz – 16.5 kHz ±4 dB
- Phase Response: 580 Hz – 16 kHz ±45°
- Linear Peak SPL: 132 dB with crest factor >15.5 dB (M-noise), 133dB (Pink noise), 136 dB (B-noise)
- Coverage:
- Horizontal Coverage: 20°
- Vertical Coverage: 60°
- Transducers:
- Low Frequency: One high-power, 15-inch cone driver with neodymium magnet; 2 Ω nominal impedance
- High Frequency: One 4-inch compression driver; 8 Ω nominal impedance
- Audio Input:
- Type: Differential, electronically balanced
- Maximum Common Mode Range: ±15 V DC, clamped to earth for transient voltage protections
- Connectors: XLR 3-pin female input with male loop output.
- Input Impedance: 10 kΩ differential between pins 2 and 3
- Wiring:
- Pin 1: Chassis/earth through 220 kΩ, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies
- Pin 2: Signal +
- Pin 3: Signal -
- Case: Earth ground and chassis
- Nominal Input Sensitivity: 0 dBV (1.0 V rms) continuous is typically the onset of limiting for noise and music
- Input Level: Audio source must be capable of producing of +20 dBV (10 V rms) into 600 Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker.
- Amplifier:
- Type: Two-channel, complementary MOSFET output stages (class AB/H)D
- Total Output Power: 2550 W peak
- THD, IM, TIM: < 0.02%
- Cooling: QuietCool™ with convection cooling at low to mid audio levels; fan-assisted only at high audio levels.
- AC Power:
- Connectors: powerCON 20 input with loop output
- Automatic Voltage Selection: Two ranges, each with high-low voltage tap (uninterrupted)
- Safety Agency Rated Operating Range: 95–125 V AC; 208–235 V AC, 50/60 Hz
- Turn-on and Turn-off Points: 85–134 V AC; 165–264 V AC
- Current Draw:
- Idle Current: 0.50 A rms (115 V AC); 0.28 A rms (230 V AC); 0.56 A rms (100 V AC)
- Maximum Long-Term Continuous Current (>10 sec): 4.55 A rms (115 V AC); 2.50 A rms (230 V AC); 5.25 A rms (100 V AC)
- Burst Current (<1 sec): 8.0 A rms (115 V AC); 4.1 A rms (230 V AC); 9.2 A rms (100 V AC)
- Maximum Instantaneous Peak Current: 20.8 A peak (115 V AC); 13.0 A peak (230 V AC); 21.6 A peak (100 V AC)
- Inrush Current: 7.1 A peak (115 V AC); 8.4 A peak (230 V AC); 7.1 A peak (100 V AC)
- RMS Network (Optional): Two-conductor twisted-pair network that reports all operating parameters of amplifiers to system operator’s host computer.
- Physical:
- Dimensions: W: 16.79 in (427 mm) x H: 36.08 in (916 mm) x D: 29.30 in (744 mm)
- Weight: 147 lb (66.68 kg)
- Enclosure: Premium multi-ply birch with slightly textured black finish with weather protection
- Protective Grille: Powder-coated, hex-stamped steel with black mesh
- Rigging: Aluminum end plates with side links for arraying units; threaded metric M10 points for rigging accessories; optional pickup plate and vertical grid for suspending arrays with uptilt or downtilt
- Acoustical:
- Operating Frequency Range: 53 Hz – 18 kHz
- Frequency Response: 56 Hz – 16.5 kHz ±4 dB
- Phase Response: 580 Hz – 16 kHz ±45°
- Linear Peak SPL: 132 dB with crest factor >15.5 dB (M-noise), 133dB (Pink noise), 136 dB (B-noise)
- Coverage:
- Horizontal Coverage: 20°
- Vertical Coverage: 60°
- Transducers:
- Low Frequency: One high-power, 15-inch cone driver with neodymium magnet; 2 Ω nominal impedance
- High Frequency: One 4-inch compression driver; 8 Ω nominal impedance
- Audio Input:
- Type: Differential, electronically balanced
- Maximum Common Mode Range: ±15 V DC, clamped to earth for transient voltage protections
- Connectors: XLR 3-pin female input with male loop output.
- Input Impedance: 10 kΩ differential between pins 2 and 3
- Wiring:
- Pin 1: Chassis/earth through 220 kΩ, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies
- Pin 2: Signal +
- Pin 3: Signal -
- Case: Earth ground and chassis
- Nominal Input Sensitivity: 0 dBV (1.0 V rms) continuous is typically the onset of limiting for noise and music
- Input Level: Audio source must be capable of producing of +20 dBV (10 V rms) into 600 Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker.
- Amplifier:
- Type: Two-channel, complementary MOSFET output stages (class AB/H)D
- Total Output Power: 2550 W peak
- THD, IM, TIM: < 0.02%
- Cooling: QuietCool™ with convection cooling at low to mid audio levels; fan-assisted only at high audio levels.
- AC Power:
- Connectors: powerCON 20 input with loop output
- Automatic Voltage Selection: Two ranges, each with high-low voltage tap (uninterrupted)
- Safety Agency Rated Operating Range: 95–125 V AC; 208–235 V AC, 50/60 Hz
- Turn-on and Turn-off Points: 85–134 V AC; 165–264 V AC
- Current Draw:
- Idle Current: 0.50 A rms (115 V AC); 0.28 A rms (230 V AC); 0.56 A rms (100 V AC)
- Maximum Long-Term Continuous Current (>10 sec): 4.55 A rms (115 V AC); 2.50 A rms (230 V AC); 5.25 A rms (100 V AC)
- Burst Current (<1 sec): 8.0 A rms (115 V AC); 4.1 A rms (230 V AC); 9.2 A rms (100 V AC)
- Maximum Instantaneous Peak Current: 20.8 A peak (115 V AC); 13.0 A peak (230 V AC); 21.6 A peak (100 V AC)
- Inrush Current: 7.1 A peak (115 V AC); 8.4 A peak (230 V AC); 7.1 A peak (100 V AC)
- RMS Network (Optional): Two-conductor twisted-pair network that reports all operating parameters of amplifiers to system operator’s host computer.
- Physical:
- Dimensions: W: 16.79 in (427 mm) x H: 36.08 in (916 mm) x D: 29.30 in (744 mm)
- Weight: 147 lb (66.68 kg)
- Enclosure: Premium multi-ply birch with slightly textured black finish with weather protection
- Protective Grille: Powder-coated, hex-stamped steel with black mesh
- Rigging: Aluminum end plates with side links for arraying units; threaded metric M10 points for rigging accessories; optional pickup plate and vertical grid for suspending arrays with uptilt or downtilt
