Martin VDO Fatron 20 LED Video Blade
The VDO Fatron 20 LED Video Blade brings outdoor-rated performance to your P3 System setup with its 20mm pixel pitch technology.
This LED video batten seamlessly integrates with your existing Martin LED video system through the P3 System Controller, enabling easy video mapping and flexible product combinations for maximum creative control.
The VDO Fatron 20 LED Video Blade is available at 320mm or 1000mm.
Features:
- Supported by integrated power and data processor (P3 PowerPort 1500 or P3 PowerPort 1000 IP) and simple cabling system
- Combined power and data cabling (compatible with other products such as VDO Sceptron and VDO Dotron)
- P3/DMX/RDM controllable (automatic protocol detection)
- Extensive range of built-in effects
- Intuitive mapping and addressing via P3 System Controller
- Fully brightness and colour calibrated for optimal consistency between products (colours matched with VDO Sceptron and VDO Dotron)
- Pixel-level brightness and colour calibrated for a completely homogenous look
- High-quality 16-bit per colour image processing technology
- 20 mm pixel pitch
- 500 cd per meter calibrated
- 1500 lumen per meter calibrated
- 8 different diffuser options plus 1 lens option (all field-exchangeable)
- IP65 rated for outdoor use
- Versatile rigging accessories
- Length: 320 mm
Specifications:
- Physical
- Length: 320 mm (12.6 in.)
- Width: 80 mm (3.15 in.)
- Height without front: 28 mm (1.10 in.)
- Height with standard front (Square Diffuser): 48 mm (1.89 in.)
- Weight without front: 0.85 kg (1.9 lbs.)
- Weight with standard front (Square Diffuser): 0.95 kg (2.1 lbs.)
- Control and Programming
- Control options: Martin P3™ System Controller (via Martin P3 PowerPort™) or DMX
- Protocol detection: Automatic
- Control modes: RGB, basic, segment and pixel-level
- Setting and addressing: Martin P3™ System Controller or RDM-compliant controller
- Control resolution: 16-bit (P3) or 8-bit (DMX) control of each colour
- Colour and intensity calibration: Pixel-level
- DMX compliance: USITT DMX512-A
- RDM compliance: ANSI/ESTA E1.20
- Firmware update: Via Martin P3™ System Controller
- DMX channels: 3/10/19/55
- Control/User Interface
- Device status: Multi-colour visual indication
- Device test and reset: Magnetic pushbutton to call up local test patterns and reset device
- Optics
- Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
- *Figure obtained under manufacturer’s test conditions.
- Options
- Open Front
- Flat Diffuser
- Smoked Flat Diffuser
- Round Diffuser
- Smoked Round Diffuser
- Square Diffuser (supplied with fixtures as standard)
- Smoked Square Diffuser
- NoBlend Diffuser
- Smoked NoBlend Diffuser
- Lens Array Narrow
- All optical accessory options are interchangeable and clip onto fixtures
- Photometric Data
- Colour resolution: 16 bits per colour (48 bits per pixel)
- Viewing angle: 120° x 120°
- LED array: 4 x 16
- Pitch (pixel centre-to-centre): 20.00 mm
- Luminous intensity, calibrated mode: 500 cd per meter
- Total output, calibrated mode: 1500 lumens per meter
- Total output, calibrated mode: 6250 nits
- Video Processing
- Brightness control
- Gamma correction and control
- Colour temperature control
- Colour space control
- Calibration processing
- Synchronization
- Signal Protocol
- Martin P3 (via Martin P3™ PowerPort) or DMX (direct)
- Installation
- Orientation: Any
- Mounting: Channel for M6 captive nuts on back of profile
- Mounting options: M6 bolts, optional sliding bracket (accepts M12 bolt)
- Connections
- Power and data input: 6-pin custom (BBD) IP66-rated
- Power and data thru: 6-pin custom (BBD) IP66-rated
- Hot plugging compatible
- Electric
- Electrical
- Nominal input voltage: 48 VDC +/- 4%
- Maximum power consumption, all LEDs at full intensity, VDO Fatron™ 20, 320 mm: 20 W
- Power supply options: Martin P3™ PowerPort 1500, Martin P3™ PowerPort 1000 IP, Martin™ IP66 PSU 240W or generic 48 VDC PSU
- Thermal
- Cooling: Convection
- Maximum ambient temperature (Ta max.) for typical video content: 45° C (113° F)
- Minimum ambient temperature (Ta min.): -20° C (-4° F)
- Max. total heat dissipation, calculated, +/- 10%: 70 BTU/hr
- Approvals
- EU safety: EN 60950-1, EN 60950-22, EN 62471
- EU EMC: EN 55024, EN 55032
- US safety: UL 60950-1, UL 60950-22
- US EMC: CFR Title 47 Part 15 Class A
- Canadian safety: CSA C22.2 No. 60950-1, No. 60950-22
- Canadian EMC: ICES-003 Class A
- Australia/NZ: RCM
- Physical
- Length: 320 mm (12.6 in.)
- Width: 80 mm (3.15 in.)
- Height without front: 28 mm (1.10 in.)
- Height with standard front (Square Diffuser): 48 mm (1.89 in.)
- Weight without front: 0.85 kg (1.9 lbs.)
- Weight with standard front (Square Diffuser): 0.95 kg (2.1 lbs.)
- Control and Programming
- Control options: Martin P3™ System Controller (via Martin P3 PowerPort™) or DMX
- Protocol detection: Automatic
- Control modes: RGB, basic, segment and pixel-level
- Setting and addressing: Martin P3™ System Controller or RDM-compliant controller
- Control resolution: 16-bit (P3) or 8-bit (DMX) control of each colour
- Colour and intensity calibration: Pixel-level
- DMX compliance: USITT DMX512-A
- RDM compliance: ANSI/ESTA E1.20
- Firmware update: Via Martin P3™ System Controller
- DMX channels: 3/10/19/55
- Control/User Interface
- Device status: Multi-colour visual indication
- Device test and reset: Magnetic pushbutton to call up local test patterns and reset device
- Optics
- Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
- *Figure obtained under manufacturer’s test conditions.
- Options
- Open Front
- Flat Diffuser
- Smoked Flat Diffuser
- Round Diffuser
- Smoked Round Diffuser
- Square Diffuser (supplied with fixtures as standard)
- Smoked Square Diffuser
- NoBlend Diffuser
- Smoked NoBlend Diffuser
- Lens Array Narrow
- All optical accessory options are interchangeable and clip onto fixtures
- Photometric Data
- Colour resolution: 16 bits per colour (48 bits per pixel)
- Viewing angle: 120° x 120°
- LED array: 4 x 16
- Pitch (pixel centre-to-centre): 20.00 mm
- Luminous intensity, calibrated mode: 500 cd per meter
- Total output, calibrated mode: 1500 lumens per meter
- Total output, calibrated mode: 6250 nits
- Video Processing
- Brightness control
- Gamma correction and control
- Colour temperature control
- Colour space control
- Calibration processing
- Synchronization
- Signal Protocol
- Martin P3 (via Martin P3™ PowerPort) or DMX (direct)
- Installation
- Orientation: Any
- Mounting: Channel for M6 captive nuts on back of profile
- Mounting options: M6 bolts, optional sliding bracket (accepts M12 bolt)
- Connections
- Power and data input: 6-pin custom (BBD) IP66-rated
- Power and data thru: 6-pin custom (BBD) IP66-rated
- Hot plugging compatible
- Electric
- Electrical
- Nominal input voltage: 48 VDC +/- 4%
- Maximum power consumption, all LEDs at full intensity, VDO Fatron™ 20, 320 mm: 20 W
- Power supply options: Martin P3™ PowerPort 1500, Martin P3™ PowerPort 1000 IP, Martin™ IP66 PSU 240W or generic 48 VDC PSU
- Thermal
- Cooling: Convection
- Maximum ambient temperature (Ta max.) for typical video content: 45° C (113° F)
- Minimum ambient temperature (Ta min.): -20° C (-4° F)
- Max. total heat dissipation, calculated, +/- 10%: 70 BTU/hr
- Approvals
- EU safety: EN 60950-1, EN 60950-22, EN 62471
- EU EMC: EN 55024, EN 55032
- US safety: UL 60950-1, UL 60950-22
- US EMC: CFR Title 47 Part 15 Class A
- Canadian safety: CSA C22.2 No. 60950-1, No. 60950-22
- Canadian EMC: ICES-003 Class A
- Australia/NZ: RCM
