Q-SYS DPM-300 10-Channel Digital Cinema Audio Processor

Q-SYS DPM-300 10-Channel Digital Cinema Audio Processor

The DPM builds on the legacy of QSC’s DCM and DCP products to provide all signal processing and monitoring functions for Digital Cinema in a single integrated system. Designed to be used with QSC’s Digital Cinema Amplifiers (DCA) and featuring advanced Intrinsic Correction™ settings for QSC’s Digital Cinema Speakers (DCS), the DPM optimizes loudspeaker performance while simplifying cinema sound system wiring and configuration. The DPM 300 is configurable for passive, bi-amp, tri-amp and quad-amp operation and 2 or 4 surround channels (5.1 or 7.1).

Features:

• Ten digital inputs for 5.1 and 7.1 soundtracks and HI/VI
• HDMI input/output for non-sync sources (DPM 300H)
• Dolby Digital Plus™ and DTS-HD® (DPM 300H)
• Control and monitoring via Ethernet including full SNMP support
• Serial automation control via RS-232
• Analog Inputs for film processors, non-sync and Mic/Line
• Master volume and full 1/3 Octave Graphic EQ on all channels (except subwoofer)
• Booth Monitor loudspeaker and headphone jack
• Digital Loudspeaker Crossovers — three passive bi-, tri-, or quad-amp screen channels
• Compatible with all existing DCA amplifiers — thousands of DCA-equipped screens are ready for full network monitoring and control
• Bypass mode routes audio around failed components to insure that the show will go on
• Intrinsic Correction™ for DCS loudspeakers for optimal “out of box” performance and reduced set-up time
• Continued development of software and firmware will add new capabilities to the existing hardware with easy firmware updates

Specifications:

• Dimensions & Accessories:
  • Dimensions (HxWxD): 3.5" (2 RU) x 19" x 15"
  • Line Voltage Requirements: 100 VAC – 240 VAC, 50/60 Hz
  • Accessories Included
    • 6 ft UL/CSA line cord
    • Connector Kit
• Front Panel Controls and Indicators:
  • Monitor Volume/Parameter Adjust: Rotary encoder
  • LCD: 128 x 64 bit Monochrome LCD
  • Master Mute: Push buttons
  • Master Volume: Rotary encoder
  • USB Type B Port: Config and management interface
  • Monitor Output: 3.5 mm TRS
• Rear Panel Connectors:
  • Network RJ45: 10/100 Mbps network management
  • Automation Inputs: RJ45 – 6 contact closure inputs
  • RS232: DB-9 Serial Interface
  • Channels 1-8 AES/EBU Inputs: RJ45
  • Channels 15-16 AES/EBU Inputs: RJ45
  • SPDIF Input: RCA — Stereo digital audio interface and Lt/Rt Matrix
  • Analog Inputs (1-8): DB-25
  • Line Inputs: 3.5 mm TRS — Stereo Left and Right and Lt/Rt Matrix
  • Mic/Line Input: XLR — Mic (+ phantom power) or line level
  • HDMI Input/Output (DPM 100H): Type A female connectors
  • DataPort Connectors: HD-15 (11) — QSC amplifier interface
  • H.I./V.I. Output: 5-pin Euro-style (x1) – common GND
  • Relay Outputs: 3-pin Euro-style (x2) – max 30 VDC
• Monitor Speaker:
  • Speaker: 2"x 3.5" full-range
• Audio Performance:
  • A/D conversion: 24-bit delta-sigma, 48 kHz
  • Frequency response: 20 Hz to 20 kHz (+- .5dB)
• Inputs/Outputs:
  • Main Analog Input:
    • Connector: DB25F - 8 channel
    • Input Stage Type: Active balanced input
    • Input Impedance: 20k Ohms
    • Max Analog Input Level: +14.2 dBu (4.0 Vrms)
  • Mic/Line Input (XLR):
    • Input Stage Type: Active balanced input
    • Input Impedance: 2.2k Ohms
    • Max Analog Input Level: 26 dBu
    • Input Gain: 0 to 60 dB in 1 dB steps
    • Phantom Power Voltage: 15V
  • Stereo Line Inputs:
    • Connector: 3.5mm TRS mini jack
    • Input Stage Type: Unbalanced input
    • Input Impedance (4 dBu Sens): > 10k Ohms
    • Max Analog Input Level (4 dBu Sens): 14 dBu (4.2 Vrms)
    • Input Impedance (-10 dBV Sens): 2.7k Ohms
    • Max Analog Input Level (-10 dBV Sens): 0 dBV (1 Vrms)
  • DataPort Outputs (HD15):
    • Max Output Level: 14 dBu
    • Dynamic Range (Unweighted): > 109 dB
  • HI/VI Outputs:
    • Connector: 5-pin Euro-style with common GND
    • Output Stage Type: Balanced output
    • Max Output Level: 18 dBu (adjustable)
  • Monitor Headphone Output:
    • Connector: Front Panel 3.5mm mini jack
    • Output Stage Type: Unbalanced output
    • Max Output Level: 21 dBu
    • Dynamic Range (Unweighted): > 109 dB
  • AES/EBU Digital Inputs (RJ45):
    • Input Stage Type: Balanced input
    • Input Sample Rate: 48 kHz or 96 kHz
  • SPDIF Digital Inputs (Mono RCA):
    • Input Stage Type: Unbalanced input
    • Stereo PCM or Dolby Digital Plus (DPM300H only)