Q-SYS DCIO-H Digital Cinema Input/Output Audio Processor for Q-SYS
Q-SYS DCIO-H is a cinema-specific interface that serves as the audio I/O for each screen in a Q-SYS™ enabled cinema complex. The DCIO – along with Q-SYS Cores, DPA-Q amplifiers and DCS loudspeakers – provides a cost-effective way to realize the full benefits of a Q-SYS enabled cinema for every room in a multiplex, by delivering a full-system approach to cinema audio design driven by the Q-SYS OS. Using Q-SYS Designer and custom UCIs, touchpanels, and mobile apps, the user can configure, control, and monitor their theatre audio equipment through a seamless system view.
Features:
- Digital Cinema Inputs/Outputs for Q-SYS™ enabled cinemas and cinema complexes
- Routes inputs/outputs from projector IMB and alternate content sources to Q-SYS Core over Q-LAN, network distribution technology by Q-SYS
- Mic/line input
- Line level monitor output
- Powered monitor output to passive speaker
- HDMI input/output for non-sync sources (DCIO-H version only)
- Dolby Audio™ (featuring Dolby Digital Plus™ and Dolby® Surround 7.1) and DTS-HD® decoding (DCIO-H version only)
- Four relay control outputs
- HI / VI outputs
- Automation inputs include RS-232 and GPI
Specifications:
- General:
- Dimensions (H x W x D): 1.75 (2 RU) x 19 x 11.2 inches (44 x 483 x 282.5 mm)
- Line Voltage Requirements: 100 VAC – 240 VAC, 50/60 Hz
- Accessories Included: 1m UL/CSA line cord, Euro-style connectors for outputs and relay connections
- Front Panel Controls and Indicators:
- Parameter Adjust: Rotary encoder
- Power On Indicator: Blue LED
- Display: Monochrome 304x96 blue OLED graphics display
- Other:
- Momentary mute button
- Mute LED (red)
- Screen Navigation (Next) and ID buttons
- Rear Panel Connectors:
- Mic/Line Input: XLR — Mic (+ phantom power) or line level
- Line Input: 3.5 mm TRS, unbalanced
- H.I./V.I. Output: 5-pin Euro-style (x1) – common GND
- Monitor Line/Speaker Outputs:
- Line: 3-pin Euro-style
- Speaker: 2-pin Euro-style, 10 W max output
- Audio Performance:
- A/D Conversion: 32-bit delta-sigma, 48 kHz
- Frequency Response: 20 Hz to 20 kHz (+/- .5dB)
- Stereo Line Inputs:
- Connector: 3.5mm TRS mini jack
- Input Stage Type: Unbalanced input
- Input Impedance (4dBu Sens): > 10k Ohms
- Max Analog Input Level (4dBu Sens): 15 dBu (4.4 Vrms)
- Input Impedance (-10dBV Sens): 2.7k Ohms
- Max Analog Input Level (-10dBV Sens): 1 dBV (1.2 Vrms)
- Other:
- Relay Outputs (4): 3-pin Euro-style
- Normally Open (NO), Normally Closed (NC), and Common
- Max 30 VDC @ 1A
- Automation Inputs (RJ45 - 6 GPI): Max input voltage 5V (3.3V typical)
- TTL Compatible Dry Contact Closure
- AES3/EBU Inputs: Ch. 1-8, 15-16 (RJ45 x2)
- Automation Inputs: RJ45, RS-232
- Dual Gigabit Ethernet Q-LAN Ports: LAN A, LAN B (RJ45 x2)
- HDMI Input/Output (DCIO-H only): HDMI 2.0, Type A female connectors
- Power Switch: Rocker switch
- IEC Power Connector
- AES/EBU Digital Inputs (RJ45):
- Input Stage Type: Balanced input
- Input Impedance: 110 ohms
- Input Sample Rate: 48 kHz or 96 kHz
- Mic/Line Input (XLR):
- Input Stage Type: Active balanced input
- Input Impedance: 2.2k Ohms
- Max Analog Input Level: 26 dBu
- Phantom Power Voltage: 15V
- General:
- Dimensions (H x W x D): 1.75 (2 RU) x 19 x 11.2 inches (44 x 483 x 282.5 mm)
- Line Voltage Requirements: 100 VAC – 240 VAC, 50/60 Hz
- Accessories Included: 1m UL/CSA line cord, Euro-style connectors for outputs and relay connections
- Front Panel Controls and Indicators:
- Parameter Adjust: Rotary encoder
- Power On Indicator: Blue LED
- Display: Monochrome 304x96 blue OLED graphics display
- Other:
- Momentary mute button
- Mute LED (red)
- Screen Navigation (Next) and ID buttons
- Rear Panel Connectors:
- Mic/Line Input: XLR — Mic (+ phantom power) or line level
- Line Input: 3.5 mm TRS, unbalanced
- H.I./V.I. Output: 5-pin Euro-style (x1) – common GND
- Monitor Line/Speaker Outputs:
- Line: 3-pin Euro-style
- Speaker: 2-pin Euro-style, 10 W max output
- Audio Performance:
- A/D Conversion: 32-bit delta-sigma, 48 kHz
- Frequency Response: 20 Hz to 20 kHz (+/- .5dB)
- Stereo Line Inputs:
- Connector: 3.5mm TRS mini jack
- Input Stage Type: Unbalanced input
- Input Impedance (4dBu Sens): > 10k Ohms
- Max Analog Input Level (4dBu Sens): 15 dBu (4.4 Vrms)
- Input Impedance (-10dBV Sens): 2.7k Ohms
- Max Analog Input Level (-10dBV Sens): 1 dBV (1.2 Vrms)
- Other:
- Relay Outputs (4): 3-pin Euro-style
- Normally Open (NO), Normally Closed (NC), and Common
- Max 30 VDC @ 1A
- Automation Inputs (RJ45 - 6 GPI): Max input voltage 5V (3.3V typical)
- TTL Compatible Dry Contact Closure
- AES3/EBU Inputs: Ch. 1-8, 15-16 (RJ45 x2)
- Automation Inputs: RJ45, RS-232
- Dual Gigabit Ethernet Q-LAN Ports: LAN A, LAN B (RJ45 x2)
- HDMI Input/Output (DCIO-H only): HDMI 2.0, Type A female connectors
- Power Switch: Rocker switch
- IEC Power Connector
- AES/EBU Digital Inputs (RJ45):
- Input Stage Type: Balanced input
- Input Impedance: 110 ohms
- Input Sample Rate: 48 kHz or 96 kHz
- Mic/Line Input (XLR):
- Input Stage Type: Active balanced input
- Input Impedance: 2.2k Ohms
- Max Analog Input Level: 26 dBu
- Phantom Power Voltage: 15V
