D&B Audiotechnik Yi7P 2-Way Passive Loudspeaker

The compact, 2-way passive Yi7P loudspeaker features two 8” drivers in a dipole arrangement with a 1.4” compression driver mounted onto a rotatable CD horn. The Yi7P is the installation version of the Y7P loudspeaker and differs only in cabinet construction, finish and mounting hardware. Sophisticated horn geometry combined with the advanced bass-reflex port design delivers full bandwidth capabilities with an extended LF output. These point source, high performance cabinets offer 75° horizontal directivity controlled down to 500 Hz, matched with a vertical dispersion of 40°. The horn can be rotated by 90° to enable horizontal orientation. The Yi7P provides a broad variety of deployment possibilities, especially when used as a stand-alone full range system, or combined with other elements from the Y-Series, either ground stacked or flown. The loudspeaker cabinet is constructed from marine plywood and has an impact resistant paint finish while Weather Resistant (WR) and Special Color (SC) versions are available. The Weather Resistant option provides an IP55 rating, and enables operation of loudspeakers in changing ambient conditions.

Features:

• High-performance 2-way passive point source loudspeaker
• Cabinet fitted for fixed installation
• 2x 8″ drives
• 4″ HF compression driver mounted in a CD horn
• Dispersion 75° x 40°
• 137dB SPL max.

Specifications:

• System data:
  • Frequency response (-5 dB standard): 59 Hz - 18 kHz
  • Frequency response (-5 dB CUT mode): 118 Hz - 18 kHz
  • Max. sound pressure:
    • with 10D: 132 dB
    • with D20/30D: 135 dB
    • with D40/D80/40D: 137 dB
  • Cabinets per amplifier channel: 2
• Loudspeaker data:
  • Configuration: Installation specific high performance 2-way passive point source loudspeaker
  • Nominal impedance: 8 Ω
  • Power handling capacity (RMS/peak 10 ms): 400/1600 W
  • Components:
    • 2 x 8" driver with neodymium magnet
    • 1.4" exit compression driver
    • passive crossover network
  • Connections:
    • 2 x NL4
    • screw terminal block
• Dimensions / weight:
  • Dimensions (H x W x D): 580 x 257 x 341 mm / 22.8 x 10 x 13.4"
  • Weight: 18 kg / 40 lb