Clear-Com Basic DX410 Wireless BundleBundle Includes:
- 1x Clear-Com BS410 Base Station for DX410 System
- 4x Clear-Com BP410 Belt Pack for DX410 Base Station
- 4x Clear-Com CC-15 Single Ear Noise-Canceling Headset
- 1x Clear-Com AC50 4-Port Battery Charger for BAT50
Clear-Com BS410 Base Station for DX410 SystemThe BS410 is the base station for the DX410 wireless system, supporting up to 15 registered BP410 beltpacks and/or WH410 all-in-one wireless headsets. The system operates in the 2.4GHz frequency band and features high quality 7kHz wideband audio. The BS410 allows the option for audio bridging by combining 2-wire and 4-wire audio together on A or B channels.
Clear-Com BP410 Belt Pack for DX410 Base StationThe BP410 is a rugged, light-weight, ergonomically designed beltback to be used with the BS410 base station. Single-channel operation allows any four beltpack and/or all-in-one wireless headset uses to engage in simultaneous, full-duplex communication. In dual-channel operation, three users may be in full-duplex with up to 13 additional users in listen-only mode. The BP410 has a rugged, over-mold, reinforced casing and long-lasting keypads with no mechanical switch. Using the BAT50 Li-Ion battery, the BP410 has up to 12 hours of battery life.
Clear-Com CC-15 Single Ear Noise-Canceling HeadsetCC-15 is a single-ear headset with noise-cancelling microphone for DX Series wireless intercom.
Clear-Com AC50 4-Port Battery Charger for BAT50The AC50 is a battery charger for the BAT50 batteries. The AC50 can charge up to four BAT50s simultaneous with additional reserve slots for four extra batteries. Charge time is 2.5 hours.
Clear-Com BS410 Features:
- Two-channels
- 7kHz wideband audio
- 2-wire and 4-wire bridging
- 2-wire auto-nulling
- Lost packet concealment
- Upgraded radio
- Supports up to 15 beltpacks and/or wireless headsets
Clear-Com BP410 Features:
- Two-channel
- 7kHz wideband audio
- Up to 15 beltpacks and/or all-in-one handsets on a single system
- Single or dual-channel operation
- Up to 12 hours of battery life
- Channels: 2 audio channels
- Frequency Range: 2400 MHz – 2483.5 MHz
- Frequency Response: 200 Hz – 7 kHz
- Antenna: Internal, horizontal/vertical diversity
- Headset Connector: 4-pin, mini-DIN
- Microphone: Electret
- Headset Output: 160mW into 32 Ohms
- Communication Security: 64-bit encryption
- System Distortion: <2%
- Controls: Power, Volume-Up, Volume-Down, A, B, ISO
- Indicators: Dual-color LED (red/green)
- Battery Requirements: 3.6V lithium-ion
- Battery Life: Up to 12 hours
- Antenna: Internal, Horizontal/Vertical diversity
- Transmitter
- Type: Frequency Hopping, Spread Spectrum (FHSS)
- Transmit Power: 100mW burst
- Modes: Momentary or Latch
- Type: Gaussian filtered FSK, TDMA
- Frequency Stability: 13 ppm
- Harmonics/Spurious: Exceeds FCC and ETSI specifications
- Receiver
- Type: Frequency Hopping, Spread Spectrum (FHSS)
- RF Sensitivity:
- Frequency Stability: 13 ppm
- Distortion: <2%
- Environmental: 32°F to +122°F (0°C to +50°C)
- Dimensions: 2.25 x 4.5 x 1 in (57.2 x 114.3 x 25.4 mm) (HxWxD)
- Weight: 7.4 oz (0.21 kg) including battery and pouch
Clear-Com CC-15 Features: - Single Ear Headset
- Enclosed Ear Phone
- Leatherette
- Type of Microphone: Electret
- Microphone Unit:
- Impedance: 2.2k Ohm +30%
- Sensitivity: -51dB, +3dB (0dB - 1V/Pa, 1kHz)
- Speaker Unit:
- Impedance: 40 Ohms +15% (1kHz)
- Max Power: 100mW (2.0V RMS)
- Frequency Range: 20Hz - 20kHz (-15dB/1kHz)
- Output SPL: 106dB = +2.0dB
- Input: 1mW (0.2V RMS)
- Weight: 6oz (170g) without cable, 8.1oz (230g) with cable
Clear-Com AC50 Features:
- Charges 4 batteries simultaneously
- 4 additional battery storage slots
- LED status indicator lights
- Green LED status indicator on top and bottom
- Power Supply
- Wall plug with switchable adapters
- Input Voltage: 85 – 264VAC; 100 – 240VAC; nominal
- Output Voltage: 5V; 3A
- MTBF (min.): 200,000 hours demonstrated
- Temperature
- Operating: 32°F - +122°F (0°C - +50°C)
- Storage: -40°F - +176°F (-40°C - +80°C
- Humidity: 0 – 95%, non-condensing
- Dimensions: 5.4in W x 1.4in H (137.2mm x 35.6mm x 162.6mm)
- Weight: 3.5 lbs. (1.59kg)
- Two-channel
- 7kHz wideband audio
- Up to 15 beltpacks and/or all-in-one handsets on a single system
- Single or dual-channel operation
- Up to 12 hours of battery life
- Channels: 2 audio channels
- Frequency Range: 2400 MHz – 2483.5 MHz
- Frequency Response: 200 Hz – 7 kHz
- Antenna: Internal, horizontal/vertical diversity
- Headset Connector: 4-pin, mini-DIN
- Microphone: Electret
- Headset Output: 160mW into 32 Ohms
- Communication Security: 64-bit encryption
- System Distortion: <2%
- Controls: Power, Volume-Up, Volume-Down, A, B, ISO
- Indicators: Dual-color LED (red/green)
- Battery Requirements: 3.6V lithium-ion
- Battery Life: Up to 12 hours
- Antenna: Internal, Horizontal/Vertical diversity
- Transmitter
- Type: Frequency Hopping, Spread Spectrum (FHSS)
- Transmit Power: 100mW burst
- Modes: Momentary or Latch
- Type: Gaussian filtered FSK, TDMA
- Frequency Stability: 13 ppm
- Harmonics/Spurious: Exceeds FCC and ETSI specifications
- Receiver
- Type: Frequency Hopping, Spread Spectrum (FHSS)
- RF Sensitivity:
- Frequency Stability: 13 ppm
- Distortion: <2%
- Environmental: 32°F to +122°F (0°C to +50°C)
- Dimensions: 2.25 x 4.5 x 1 in (57.2 x 114.3 x 25.4 mm) (HxWxD)
- Weight: 7.4 oz (0.21 kg) including battery and pouch
Clear-Com CC-15 Features: - Single Ear Headset
- Enclosed Ear Phone
- Leatherette
- Type of Microphone: Electret
- Microphone Unit:
- Impedance: 2.2k Ohm +30%
- Sensitivity: -51dB, +3dB (0dB - 1V/Pa, 1kHz)
- Speaker Unit:
- Impedance: 40 Ohms +15% (1kHz)
- Max Power: 100mW (2.0V RMS)
- Frequency Range: 20Hz - 20kHz (-15dB/1kHz)
- Output SPL: 106dB = +2.0dB
- Input: 1mW (0.2V RMS)
- Weight: 6oz (170g) without cable, 8.1oz (230g) with cable
Clear-Com AC50 Features:
- Charges 4 batteries simultaneously
- 4 additional battery storage slots
- LED status indicator lights
- Green LED status indicator on top and bottom
- Power Supply
- Wall plug with switchable adapters
- Input Voltage: 85 – 264VAC; 100 – 240VAC; nominal
- Output Voltage: 5V; 3A
- MTBF (min.): 200,000 hours demonstrated
- Temperature
- Operating: 32°F - +122°F (0°C - +50°C)
- Storage: -40°F - +176°F (-40°C - +80°C
- Humidity: 0 – 95%, non-condensing
- Dimensions: 5.4in W x 1.4in H (137.2mm x 35.6mm x 162.6mm)
- Weight: 3.5 lbs. (1.59kg)
- Impedance: 2.2k Ohm +30%
- Sensitivity: -51dB, +3dB (0dB - 1V/Pa, 1kHz)
- Impedance: 40 Ohms +15% (1kHz)
- Max Power: 100mW (2.0V RMS)
- Frequency Range: 20Hz - 20kHz (-15dB/1kHz)
- Output SPL: 106dB = +2.0dB
- Input: 1mW (0.2V RMS)
- Charges 4 batteries simultaneously
- 4 additional battery storage slots
- LED status indicator lights
- Green LED status indicator on top and bottom
- Power Supply
- Wall plug with switchable adapters
- Input Voltage: 85 – 264VAC; 100 – 240VAC; nominal
- Output Voltage: 5V; 3A
- MTBF (min.): 200,000 hours demonstrated
- Temperature
- Operating: 32°F - +122°F (0°C - +50°C)
- Storage: -40°F - +176°F (-40°C - +80°C
- Humidity: 0 – 95%, non-condensing
- Dimensions: 5.4in W x 1.4in H (137.2mm x 35.6mm x 162.6mm)
- Weight: 3.5 lbs. (1.59kg)