Some situations call for a little extra umph from the lower side of the scale. That's when a PXW 15P is a perfect call. This 15" powered subwoofer gives you a solid lift in the bass area with balanced XLR I/O jacks as well as a high pass XLR ouput. The back panel features LED indicators for limit, signal, protect, and power. The protect indicator will glow when the subwoofer is getting too hot, it then goes into protect mode and stops all output to save your investment.
Features
- 15" powered subwoofer
- Attached wheels on the subwoofer
- Limit Indicator lets you know when built-in limiter is active
- Signal Indicator glows when when there a signal is received to the Full Range input
- Subwoofer gain control knob regulates the output level of the subwoofer, and set balance between the speakers and subwoofers.
- Protect Indicator glows when the subwoofer goes into protect mode which prevents the subwoofer amplifiers from getting too hot and stops all output
- Power LED indicates power is on
- Phase switch for reversing polarity of subwoofer
- Full range XLR input
- High Pass XLR output
- Thru full range output
- Built-in pole mount socket
- Built-in carrying handles
Specs
- Component: 15" Woofer (4 Ohm)
- Dimensions: 23.7"L x 17.2"W x 23.5"H
- Weight: 88 Lbs.
- Environmental conditions: Operational temperature: 5° to 35°C (41° to 95°F)
- Operational humidity: 25 to 85% RH (non-condensation)
- Storage temperature: -20° to 60°C (4° to 140°F)
- Frequency response: (-3db): 45Hz ~ 120Hz
- Frequency range: (-10db): 35Hz ~ 120Hz
- Maximum SPL at 1m: 126db
- Peak output at 1m: 129db
- Crossover frequency: 120Hz (12db/octave)
- Input type: balanced differential
- Input impedence: 50k
- Input protection: Level protected
- Thermal protection: Input stage muting, auto-reset
- Low-Frequency transducer diameter: 15"
- Voice coil diameter: 4"
- Low-Frequency Power Amplifier: Rated Power 500W continuous, 700W peak
- Rated THD: < 0.03%
- Cooling: Passive-Heatsink with speed sensitive electric fan