EAW 2070747-70 NTX210L 2-Way Self-Powered Loudspeaker - Black
Building on the Radius line of loudspeakers, NTX Series aims to deliver a high performance solution while cutting down long set up times. NTX Series couples unique and intelligent features with EAW’s signature acoustical design to deliver solutions for rental firms, production companies, and system integrators. The NTX articulated array features OptiLogic, providing automatic array self- detection and instant optimization including air loss compensation and more. Resolution 2™ software provides system optimization from anywhere in the venue, plus intuitive room design and prediction in a single, comprehensive application. With the proven sonic performance of EAW’s acoustic design and DSP mastery plus full Dante integration across the line, NTX Series delivers an intelligent and flexible system to fit any budget.
Features:
- Array self-detection via onboard infrared sensors and accelerometers for near-instant optimization that cuts down on setup and tuning time.
- Comprehensive software that delivers system prediction, control, and monitoring from any location in the venue.
- Integrated Dante™ networking (with loop-thru) including Analog redundancy capability.
Specifications:
- Performance:
- Calculated Axial Output Limit (whole space SPL):
- Peak 140dB LF/HF (12dB Crest Factor)
- Operating Range: 55Hz–18kHz
- Nominal Beamwidth:
- Horz: 90°
- Vert: 12°
- Configuration:
- Subsystem Transducer Loading:
- LF 2x10" cone, 2.5" VC Vented
- HF 1x1.4" exit, 3" VC compression drivers Isophasic Wave Guide
- Operating Mode:
- Bi-amp LF, HF
- Amplifier Channels External Signal Processing:
- DSP w/EAW Focusing™ & DynO™
- Electrical:
- Input Type: Electronically Balanced
- Max Input Level: 21dBu
- Impedance: 20 kOhm (balanced)
- Input Wiring: XLRF, Pin 1 chassis, pin 2 +, pin 3 – separate loop-thru XLRM (for analog signal only)
- Input Selection: Analog, Dante
- Amplifiers & Processing (LF/HF) Type: Modified Class D
- Maximum Output:
- LF: 1200W
- HF: 400W
- Driver Protection: Integral DSP limiting
- AC Mains (nominal):
- Connector: Neutrik True1
- Input: 100 V TO 240 V
- Frequency: 50 Hz to 60 Hz
- Power Consumption:
- Idle – 20W
- 1/8th - 200W
- 1/3rd - 300W
- Full - 550W
- Controls/Communication:
- Connections: Neutrik PowerCON TRUE1 TOP
- Protocols: Ethernet/Dante
- Software: EAW Resolution 2™
- Performance:
- Calculated Axial Output Limit (whole space SPL):
- Peak 140dB LF/HF (12dB Crest Factor)
- Operating Range: 55Hz–18kHz
- Nominal Beamwidth:
- Horz: 90°
- Vert: 12°
- Calculated Axial Output Limit (whole space SPL):
- Configuration:
- Subsystem Transducer Loading:
- LF 2x10" cone, 2.5" VC Vented
- HF 1x1.4" exit, 3" VC compression drivers Isophasic Wave Guide
- Operating Mode:
- Bi-amp LF, HF
- Amplifier Channels External Signal Processing:
- DSP w/EAW Focusing™ & DynO™
- Subsystem Transducer Loading:
- Electrical:
- Input Type: Electronically Balanced
- Max Input Level: 21dBu
- Impedance: 20 kOhm (balanced)
- Input Wiring: XLRF, Pin 1 chassis, pin 2 +, pin 3 – separate loop-thru XLRM (for analog signal only)
- Input Selection: Analog, Dante
- Amplifiers & Processing (LF/HF) Type: Modified Class D
- Maximum Output:
- LF: 1200W
- HF: 400W
- Driver Protection: Integral DSP limiting
- AC Mains (nominal):
- Connector: Neutrik True1
- Input: 100 V TO 240 V
- Frequency: 50 Hz to 60 Hz
- Power Consumption:
- Idle – 20W
- 1/8th - 200W
- 1/3rd - 300W
- Full - 550W
- Controls/Communication:
- Connections: Neutrik PowerCON TRUE1 TOP
- Protocols: Ethernet/Dante
- Software: EAW Resolution 2™
