Name: Radial JD7 Guitar Signal Splitter & Distro
Brand: Radial Engineering
SKU: JD7

Radial JD7 Guitar Signal Splitter & Distro

Studio Guitar Distribution and Splitting

The JD7™ is a guitar signal splitter that is able to drive as many as seven amplifiers at the same time without introducing noise, signal loss, or hum and buzz from ground loops.

Natural tone, quiet operation
The JD7 allows you to feed up to seven amplifiers simultaneously, with premium Jensen transformers on the outputs that ensure distortion-free signal transfer while blocking hum and buzz from ground loops. To help retain the natural tone of your instrument, Drag control load correction is also featured on the input so you won't lose the tone and feel of connecting your guitar directly to an amplifier.

Record direct and Reamp through multiple amps
The JD7 has a built-in Radial DI box, so you can take a clean guitar track directly to your recording interface while simultaneously playing through multiple amplifiers. A Reamp input allows you to send your recorded guitar track from your recording device back through any or all of your amps, so you can focus on the performance and have the freedom to tweak your amps and microphones later on.

Using the JD7 as a splitter
The JD7 is equipped with A or B inputs and 6 guitar outs on the front panel plus a tuner out on the rear. Use ch-1 with a properly grounded amp, then add as many as you like. All outputs are isolated to eliminate hum and buzz.

Using the JD7 for Reamping
Start by recording a dry track using the JD7's DI output. Then send the clean track back to the Radial JD7's rear panel XLR input. Adjust the level and you are now set to drive as many amps as you need. Move the mics, change the tone settings.

Using the JD7 with effects
A great way to quiet down noisy guitars is to run all your signals through the JD7. The high performance class-A buffers and Jensen transformer isolated outputs are truly amazing! Channels 5 and 6 are also equipped with effects loops.

Features:

Drive up to 7 amplifiers and 2 effects loops at the same time
Jensen transformer isolation eliminates hum and buzz
Built-in Radial Direct box and Reamp capabilities
Drag control load correction for natural tone
Input A
High impedance unbalanced ¼" input used to connect the guitar to the JD7
A/B Selector
Selects between input A or input B (if connected) or the Reamp input on the rear panel.
Drag Control
Adjusts the load on the pickup for more natural sound and feel.
-8dB Pad
Input level attenuator protects the JD7 against overload from high output instruments such as keyboards.
Input B
High impedance ¼" jack used for second guitar is equipped with priority switching jack.
Output 1
Primary output, used to ground the guitar to the JD7 via the first amp. Equipped with on-off switch.
Output 2-4
Transformer isolated outputs used to drive multiple amps. Equipped with on-off switch, ground lift to help reduce noise and 180º reverse to phase-align amps.
Output 5-6
Transformer isolated outputs used to drive multiple amps. Equipped with on-off switch, ground lift to help reduce noise and 180º reverse to phase-align amps.
Power
Used to connect the external 15V power supply that comes with the Radial JD7.
Effects Loops
High impedance ¼" send and receive jacks designed for guitar pedals are available on outputs 5 and 6. Loop is activated via front panel insert switches.
Reamp XLR Input
Takes pre-recorded balanced line level signal and converts it to a guitar level signal to drive amps and pedals. Equipped with ground lift switch to eliminate noise and input level attenuator to ensure signal is distortion free. Activated using front panel AB selector.
Direct Box XLR
Transformer isolated direct box output used to record a dry track. Equipped with ground lift to eliminate noise and 180ºpolarity reverse to phase-align the signal.
Aux Out
Rear panel unbalanced ¼" output is always on. Primarily designated to drive a tuner but may also be used to drive a 7th guitar amp.
Warranty: Radial 3-year, transferable