Neumann TLM-107 Multi-Pattern Condenser Microphone
The TLM 107 is a reference class microphone for vocals and instruments with breathtaking realism. Five polar patterns plus variable pad and low cut settings make the TLM 107 exceptionally flexible. And with a dynamic range of 131 dB the TLM 107 captures anything from a slight whisper to massive drums without unwanted noise or distortion.
Features:
- For Studio Vocals and Instruments
- Five Selectable Polar Patterns
- Dual-Diaphragm Condenser Capsule
- Transformerless Circuitry
- Balanced Tone in All Polar Patterns
- Switchable Pad at -6 or -12 dB
- Low-Cut Filter at 40 or 100 Hz
- Low Self-Noise of 10 dBA
- 48V Phantom Powered
Specifications:
- Acoustical operating principle Pressure gradient transducer
- Directional pattern Omnidirectional, wide angle cardioid, cardioid, hypercardioid, figure-8
- Frequency range 20 Hz ... 20 kHz
- Sensitivity at 1 kHz into 1 kohm 11 mV/Pa
- Rated impedance 50 ohms
- Rated load impedance 1 kohms
- Equivalent noise level, CCIR1) 22 dB
- Equivalent noise level, A-weighted1) 10 dB-A
- Signal-to-noise ratio, CCIR1) (rel. 94 dB SPL) 72 dB
- Signal-to-noise ratio, A-weighted1) (rel. 94 dB SPL) 84 dB
- Maximum SPL for THD 0.5%2) 141 dB
- with preattenuation -6 dB 147 dB
- with preattenuation -12 dB 153 dB
- Max. output voltage for THD < 0.5 % 10 dBu
- Power Supply (IEC 61938) P48
- Current consumption 3.2 mA
- Required connector XLR 3 F
- Weight 445 g
- Diameter 64 mm
- Length 145 mm
- Acoustical operating principle Pressure gradient transducer
- Directional pattern Omnidirectional, wide angle cardioid, cardioid, hypercardioid, figure-8
- Frequency range 20 Hz ... 20 kHz
- Sensitivity at 1 kHz into 1 kohm 11 mV/Pa
- Rated impedance 50 ohms
- Rated load impedance 1 kohms
- Equivalent noise level, CCIR1) 22 dB
- Equivalent noise level, A-weighted1) 10 dB-A
- Signal-to-noise ratio, CCIR1) (rel. 94 dB SPL) 72 dB
- Signal-to-noise ratio, A-weighted1) (rel. 94 dB SPL) 84 dB
- Maximum SPL for THD 0.5%2) 141 dB
- with preattenuation -6 dB 147 dB
- with preattenuation -12 dB 153 dB
- Max. output voltage for THD < 0.5 % 10 dBu
- Power Supply (IEC 61938) P48
- Current consumption 3.2 mA
- Required connector XLR 3 F
- Weight 445 g
- Diameter 64 mm
- Length 145 mm