Elation PALM-COPILOT 8 Channel DMX Controller
The Palm Copilot is a simple 8 channels DMX controller and may be used to link with LC-8P series relay pack for control. It is availablein DMX output and Analog output mode.
The Palm Copilot requires a standard 3-pin XLR connector for data output. Connect the Palm Copilot and your fixtures together using standard 3 pin DMX cables. If you are constructing your own data cables, be sure to use standard two conductor shielded cable(This cable may be purchased at almost all professional sound and lighting stores).
The user can flip the dip-switch 10 to "on" or "off" position to select the DMX output or Analog output. Flip the dip-switch 10 to "off" position, the Palm Copilot goes into Analog output mode. Flip the dip-switch 10 to "on" position, the Palm Copilot goes into DMX output mode.
The Palm Copilot also enables you to connect the Relay Pack such as LC-8P series which from Elation.
Features:- 8 channel, touch sensitive, On/Off controller
- USITT DMX-512 (1990 protocol) & analog output
- Analog output is compatible with LC-4 and LC-8 "Light Copilot" switch packs
- DMX output is compatible with any standard DMX-512 pack
- Powered by external power supply or 9VDC battery
- 10-way dip switch setting to patch starting DMX address
- Power failure memory
- 3-pin, XLR, DMX output connector
- DB-9 analog output connector
- Touch tone feature can be set to On or Off
- 9~12VDC power input (power supply included)
- Dimensions (L x W x H): 4.75" x 3.25" x 1.5" / 120 x 80 x 35mm
- Weight: 0.5lb (240G)
