Elation DiGidot C4 Live LED Pixel Driver

The DiGidot C4 is a small powerful LED controller, that suits all kinds of situations. One DiGidot C4 drives more than 6000 single LEDs. Furthermore, it supports 40+ IC types and various industry standards. This is all you need in LED and show control!

Features:

Amazing Output Volume

• The DiGidot C4 Live can output to a maximum of 6000 individual LEDs and 2,000 RGB LEDs. The LEDs are spread over 4 Outputs, where each can have 3 Universes. Lights can be directly connected to the LED driver. The digital Ouputs of the DiGidot C4 Live can all have various settings. You can output both the SPi and DMX signal. Being able to directly connect to LED lights allows the creation of more cost efficient lighting installations. Ethernet nodes and switches are no longer a neccessity, since the DiGidot C4 combines those features. Several DiGidot C4s can be connected together and run the lighting installation as one.
• 12 Universes
• 2,000 RGB Pixels
• 6,000 Channels

Compatibility

• The DiGidot C4 is compatible with more than 40 ICs. DiGidot has been active in professional lighting for more 10 years and assures compatibility with 80% of LED lights used in professional lighting. Even if the IC is not yet in the list below, they can always make it available.

40+ Supported IC's

• APA102, MY9221, TM1814, WS2801, APA104, MY9231, TM1914A, WS2803, APA106, PC5XS301V0500, UCS1903, WS2811, BS0901, SK6812, UCS1904, WS2812, DM412, SK6822, UCS2903, WS2812B, DMX, SM16703, UCS2904, WS2812S, DMX TTL, SM16716, UCS2912, WS2813, GW6205, SM16726, UCS512B3, WS2818, INK1003, TM1803, UCS8904, LD1510, TM1804, UCS9812, LPD6803, TM1809, WES9412, MBI6024, TM1812, WES943

Can’t find your IC type? Please send an e-mail to info@digidot.eu. They will do their best to add it to the next firmware release.

User Interface

• Full device control from its web-based interface.
• Whether you use Mac or Windows, the responsive HTML5 interface works on all well known platforms, such as Chrome and Safari. With its clean look and clear explanations at every button it has a minimal learning curve. By typing the standard IP address 10.254.254.254 in your web browser the built-in user interface will help you setup the DiGidot C4 according to your project requirements. You can adjust the number of universes, the type of LED (the LED light IC chip) and route them to a preferred output. Are you using multiple DiGidot C4’s daisy-chained or in a network? Name them the way you want and give them a unique IP address to easily recognize them in your project!

Software

• Works well with all professional lighting control systems.
• The DiGidot C4 Controller works well with most common LED software used in professional event lighting. The device was thoroughly tested with MADRIX, but they can assure it works well with other software, such as: ArKaos, Chromateq, Pharos and Resolume. Nonetheless, the DiGidot C4 was used numerous times with grandMA consoles.

Specifications:

Size / Weight:

• Length: 6.02" (153MM)
• Width: 2.91" (74MM)
• Height: 1.10" (28MM)

Electrical

• Working Voltage: 5 – 24V
• Maximum Power Consumption: 5W

Capacity

• 6000 Individual pixels (at 30 fps)
• 2000 RGB pixels

Connectors

• 2 x RJ45 Connectors
• 3.5 mm TRRS Analog Jack
• 6-pin Input/Output Connector
• 40-pin Extension Port

Signal Inputs

• Articstic License Art-Net 3
• DMX 512
• 1-10V Analog Input (can be used for switches/triggers)
• DiGidot C4 IOS/Google Play App

Signal Outputs

• Artistic License Art-Net 3
• DMX 512 (2 Outputs)
• DMX TTL (4 Outputs)
• Various LED IC Types: WS2812, WS2812B, TM1803, UCS8904, WS2811, APA102, WS2801, TM1809 (see the digidot.eu site for a complete list of IC types. A new IC type can be added on request)

Light Outputs

• LED Strips
• LED Wall Washers
• LED Downlights
• LED Video Screens
• Any type of Dynamic LED light

Programming & Control

• User Interface (accessible through Google Chrome Internet browser)
• Any type of Art-Net Software/Device (contact Elation for a complete list of supported software)
• Mounting Options: din-rail (clip not included), tie-strap, screws.
• Included Accessories: None