JBL VLA-C125S-BK Dual 15-Inch Subwoofer for VLA Compact Line Array System - Black
The VLA-C125S uses JBL proven technology components, featuring dual 15” Differential Drive® transducers.
Enclosures feature multi-layer reinforced fiberglass and steel end-panels. Grilles are zinc plated, powder coated 14-gauge perforated steel with an acoustically transparent black grill cloth backing, a hydrophobic mesh underlayer, and a waterproof rail system.
The rigging system is inherent to the design of the system. Inter-box angles are selected when the array is assembled. Other accessories include a rigging frame, pull-back bar, and a cardioid kit.
Features:
- Compact line array module optimized for permanent install applications
- Advanced technology component transducers for low weight and high output
- Outdoor IP55 rated enclosure for protection from dust and water
- Comprehensive rigging points for creating a line array configuration
- Fiberglass box construction and weatherized components
- Dual 15” transducers
Specifications:
- Frequency Range (-10dB): 52 Hz – 210 Hz
- Frequency Response (±3 dB): 62 Hz – 123 Hz
- System Power Rating: 1600 W Continuous Pink Noise (6400 W peak), 2 hrs800 W Continuous Pink Noise (3200W peak), 100 hrs
- Maximum Input Voltage: 80 V Rms (2 hrs), 160 V peak
- Maximum SPL (1m): 127 dB Cont. Ave (2 hrs), 133 dB Peak
- Sensitivity: 98 dB (52 Hz – 210 Hz, 2.83V)
- Impedance: 4Ω, 3.0Ω min @ 195 Hz
- Amplifiers: Crown DCi Family with DSP on-board
- Recommended: Crown DCi 2 | 2400N Crown DCi 4 | 2400N
- LF Driver: 2 x 2275H, 304 mm (15 in) diameter , each with two 76 mm (3 in) diameter voice coils, Neodymium Differential Drive®, Direct Cooled™
- Enclosure Material: Fiberglass shell, gelcoat finish, with 18 mm Birch plywood internal bracing.
- Grille: Powder coated 14 gauge hex-perforated steel with zinc under-coating, backed with acoustically transparent cloth and hydrophobic screen.
- Inter-Enclosure Angles: VLA-C125S to VLA-C125S: 0° using VLA-C125S Bracket Plate (included with VLA-C125S)VLA-C265 below VLA-C125S Subwoofer (VLA-C265 cannot be connected above C125S): 0°, 5° using VLA-C125S Bracket Plate (included with VLA-C125S)VLA-C2100 below VLA-C125S Subwoofer (VLA-C2100 cannot be connected above C125S): 0°, 7.5° using VLA-C125S Bracket Plate (included with VLA-C125S)
- Environmental: IP-55 rating per IEC529 (dust protected and protected against jets of water).
- Terminals: CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9mm (0.375 in) spade lugs. Touch-proof covers. Full set of terminals on back panel, plus optional-use inter-cabinet connection terminals located on top and bottom panels of cabinet.
- Colors: -GR: Gray (similar to Pantone 420C), -BK: Black
- Dimensions (H x W x D): 508 x 848 x 634 mm (20.0 x 33.4 x 24.9 in)
- Net Weight (each): 56.7 kg (125 lbs)
- Shipping Weight (ea): 62.6 kg (138 lbs)
- Frequency Range (-10dB): 52 Hz – 210 Hz
- Frequency Response (±3 dB): 62 Hz – 123 Hz
- System Power Rating: 1600 W Continuous Pink Noise (6400 W peak), 2 hrs800 W Continuous Pink Noise (3200W peak), 100 hrs
- Maximum Input Voltage: 80 V Rms (2 hrs), 160 V peak
- Maximum SPL (1m): 127 dB Cont. Ave (2 hrs), 133 dB Peak
- Sensitivity: 98 dB (52 Hz – 210 Hz, 2.83V)
- Impedance: 4Ω, 3.0Ω min @ 195 Hz
- Amplifiers: Crown DCi Family with DSP on-board
- Recommended: Crown DCi 2 | 2400N Crown DCi 4 | 2400N
- LF Driver: 2 x 2275H, 304 mm (15 in) diameter , each with two 76 mm (3 in) diameter voice coils, Neodymium Differential Drive®, Direct Cooled™
- Enclosure Material: Fiberglass shell, gelcoat finish, with 18 mm Birch plywood internal bracing.
- Grille: Powder coated 14 gauge hex-perforated steel with zinc under-coating, backed with acoustically transparent cloth and hydrophobic screen.
- Inter-Enclosure Angles: VLA-C125S to VLA-C125S: 0° using VLA-C125S Bracket Plate (included with VLA-C125S)VLA-C265 below VLA-C125S Subwoofer (VLA-C265 cannot be connected above C125S): 0°, 5° using VLA-C125S Bracket Plate (included with VLA-C125S)VLA-C2100 below VLA-C125S Subwoofer (VLA-C2100 cannot be connected above C125S): 0°, 7.5° using VLA-C125S Bracket Plate (included with VLA-C125S)
- Environmental: IP-55 rating per IEC529 (dust protected and protected against jets of water).
- Terminals: CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9mm (0.375 in) spade lugs. Touch-proof covers. Full set of terminals on back panel, plus optional-use inter-cabinet connection terminals located on top and bottom panels of cabinet.
- Colors: -GR: Gray (similar to Pantone 420C), -BK: Black
- Dimensions (H x W x D): 508 x 848 x 634 mm (20.0 x 33.4 x 24.9 in)
- Net Weight (each): 56.7 kg (125 lbs)
- Shipping Weight (ea): 62.6 kg (138 lbs)
