Audio Technica U891RWX Condenser Boundary Mic - Wt

Audio Technica U891RWX Condenser Boundary Mic - Wt

• Designed to deliver easy, flexible control in conference and boardroom installations, the versatile U891R cardioid condenser boundary microphone features an activation switch that can be set to three modes: press-on/press-off, press to talk, and press to mute. The phantom-powered microphone is equipped with a unique PivotPoint rotating output connector and an LED status indicator. UniGuard innovations offer unsurpassed immunity from radio frequency interference; interchangeable elements are available in cardioid, hypercardioid and omnidirectional polar patterns; an 80 Hz low-cut UniSteep filter reduces pickup of low-frequency ambient noise. The microphone’s heavy die-cast case and silicon foam bottom pads minimize coupling of surface vibration to the microphone. The unit’s self-contained electronics eliminate the need for an external power module.

• Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations
• An activation switch can be set to any of three operating modes: "touch-on/ touch-off," "touch-to-talk" and "touch-to-mute"
• PivotPoint rotating output connector allows cable to exit from either the rear or the bottom of the microphone
• Superior off-axis rejection for maximum gain before feedback
• UniGuard RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
• Small-diameter UniPoint capsule near boundary eliminates phase distortion and delivers clear, high-output performance
• Heavy die-cast case and non-slip silicone foam bottom pads minimize coupling of surface vibration to the microphone
• Low-profile design with low-reflectance finish for minimum visibility
• Improved switch design
• Available in two colors: black (U891Rx) and white (U891RWx)

• Fixed-charge back plate, permanently polarized condenser
• Half-cardioid (cardioid in hemisphere above mounting surface)
• Frequency Response: 30-20,000 Hz
• Low Frequency Roll-Off: 80 Hz, 18 dB/octave
• Open Circuit Sensitivity: –34 dB (19.9 mV) re 1V at 1 Pa
• Impedance: 200 ohms
• Maximum Input Sound Level: 130 dB SPL, 1 kHz at 1% T.H.D.
• Dynamic Range (typical): 104 dB, 1 kHz at Max SPL
• Signal-To-Noise Ratio: 68 dB, 1 kHz at 1 Pa
• Phantom Power Requirements: 11-52V DC, 4 mA typical
• Activation Switch: on/off;
• Switch function: press on/off,
• Momentary on, momentary off;
• Flat, roll-off
• Weight: 264 g (9.3 oz)
• Dimensions: 108.0 mm (4.25") maximum length, 84.0 mm (3.31") maximum width, 23.0 mm (0.91") maximum height
• Output Connector: TB3M-type
• Cable: 7.6 m (25.0') long, 3.2 mm (0.13"); diameter, 2-conductor, shielded cable with; TA3F-type and XLRM-type connectors
• Optional Interchangeable Elements: UE-O omnidirectional (360&); UE-H hypercardioid (100&)
• Accessory Furnished:
• Soft protective pouch