Shure MX395AL/C-LED Microflex Low Profile Cardioid Boundary Microphone - 5-Pin XLR - Aluminium
Boundary microphone delivers exceptional sound pickup and a low-profile design in a variety of colors and pickup patterns to suit any meeting room. It features wide dynamic range and smooth frequency response, remote LED control, and Aluminium color.
Features:
- Only 1.25 inch (3.8 cm) in diameter
- Cardioid polar pattern
- Wide dynamic range and smooth frequency response
- Aluminum
- Bi-color status indicator available with -LED models
- Logic input for remote LED control
- CommShield Technology
Specifications:
- Type: Condenser (electret bias).
- Frequency response: 50-17000 Hz.
- Polar pattern (at 1 kHz): Cardioid
- Output impedance: EIA rated at 150 ohm (170 ohm actual).
- Output configuration: Active balanced.
- Sensitivity (at 1 kHz, open circuit voltage) 1 Pascal=94 dB SPL: -35 dBV/Pa (18 mV)
- Maximum SPL (1 kHz at 1% THD, 1 k ohm load): 121 dB
- Equivalent output noise (A-weighted): 28 dB SPL
- Signal-to-noise ratio (referenced at 94 dB SPL at 1 kHz): 66 dB
- Dynamic range (1 k ohm load at 1 kHz): 93 dB
- Common mode rejection: 45 dB minimum (10 Hz to 100 kHz).
- Preamplifier output clipping level: -8 dBV (0.4 V) (1% THD).
- Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 4 relative to pin 2 of output XLR connector.
- Weight:
- Net: .136 kg (.30 lb)
- Packaged: 0.374 kg (0.825 lbs)
- Logic connections:
- LED IN: Active low (=1.0V), TTL compatible
- Absolute maximum voltage: -0.7V to 50V
- Environmental conditions:
- Operating temperature: -18-57 °C (0-135 °F)
- Storage temperature: -29-74 °C (-20-165 °F)
- Relative humidity: 0-95%
- Power requirements: 48-52 Vdc phantom, 8.0 mA
- Type: Condenser (electret bias).
- Frequency response: 50-17000 Hz.
- Polar pattern (at 1 kHz): Cardioid
- Output impedance: EIA rated at 150 ohm (170 ohm actual).
- Output configuration: Active balanced.
- Sensitivity (at 1 kHz, open circuit voltage) 1 Pascal=94 dB SPL: -35 dBV/Pa (18 mV)
- Maximum SPL (1 kHz at 1% THD, 1 k ohm load): 121 dB
- Equivalent output noise (A-weighted): 28 dB SPL
- Signal-to-noise ratio (referenced at 94 dB SPL at 1 kHz): 66 dB
- Dynamic range (1 k ohm load at 1 kHz): 93 dB
- Common mode rejection: 45 dB minimum (10 Hz to 100 kHz).
- Preamplifier output clipping level: -8 dBV (0.4 V) (1% THD).
- Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 4 relative to pin 2 of output XLR connector.
- Weight:
- Net: .136 kg (.30 lb)
- Packaged: 0.374 kg (0.825 lbs)
- Logic connections:
- LED IN: Active low (=1.0V), TTL compatible
- Absolute maximum voltage: -0.7V to 50V
- Environmental conditions:
- Operating temperature: -18-57 °C (0-135 °F)
- Storage temperature: -29-74 °C (-20-165 °F)
- Relative humidity: 0-95%
- Power requirements: 48-52 Vdc phantom, 8.0 mA
