Yorkville Sound NX55P-2 12-Inch Speakers (x2) and ES21P Subwoofer (x2) with Sub Poles and Cables
This package contains the following products:
- 2x Yorkville NX55P-2 12-Inch Powered Speaker
- 2x Yorkville Sound ES21P Elite Series 21-Inch 2400 Watt Powered Subwoofer
- 2x Gator Frameworks ID Series Subwoofer Speaker Pole
- 2x Solena Professional 25-Foot Microphone Cable
*2x Yorkville NX55P-2 12-Inch Powered Speaker
Yorkville Sound's best selling fully featured flagship active loudspeaker has been redesigned for 2014. A new power amplifier design delivers an earth shattering 1000W program (2000W peak for maximum headroom) making it our best performing, most versatile cabinet in the NX Series. The NX55P-2 enclosure itself has been molded for maximum versatility. The trapezoid box is ideal for mounting in arrays, or for use as a monitor cabinet with well-protected inputs and controls. Designed for maximum versatility, the NX55P-2 can be used in any orientation, including close to walls, floors and in close arrays with multiple cabinets. Particular care was taken designing the components to reduce extraneous heat production. The NX55P-2 has a versatile direct input system and built-in mixer. The mixer allows the loudspeaker to be used directly with a microphone and or line source. The loop output allows additional active cabinets to be driven from one cabinet's mixer stage, or a series of cabinets to be driven from one source. Multiple NX55P-2's can be linked together but a maximum of three "mixers" can be active at any one time. The microphone input has equalization and high pass filtering appropriate for vocal applications. The trim control allows looped cabinets to be individually adjusted in level. This is valuable in applications where large numbers of cabinets are used such as clusters or in trade show applications. The NX55P-2 has a selectable two position high-pass filter to limit extraneous low frequency rumble, or to crossover at the input so the loudspeaker can easily and effectively be used with subwoofers from a single full range source. Engaging the high pass filter also makes the NX55P-2 a more efficient and effective vocal monitor. The NX55P-2 is an ideal loudspeaker for mobile presentation PA where high volume and superior sound quality is required. Multiple loudspeakers can easily be linked using mixer inputs from each loudspeaker to create a six input system, no external mixer required.
Features:
- Integrated 2000W amplifier (peak - 1000W program)
- Max SPL 134dB peak (128dB continuous)
- Dual purpose full range and wedge monitor format enclosure
- Lightweight, high efficiency, high tech bi-amped power module
- +/- 6dB input trim control for individual cabinet level adjustment
- XLR and TRS inputs / outputs for easy connection and looping
- Multi-input source mixer for direct inputs
- Direct microphone input with level control
- Two-way overall EQ controls
- High quality 1" high frequency driver
- Next generation 12" high power woofer
- Integrated flying hardware
- Recessed mixer panel
*2x Yorkville Sound ES21P Elite Series 21-Inch 2400 Watt Powered Subwoofer
The ES21P is a 21- inch active subwoofer that dials up the watts to produce an astonishing amount of low-end output. Adding to Elite's existing line of 12, 15 and 18 inch subwoofers, the ES21P is an accessible solution for demanding club and concert settings.
Features
- 21-inch rear horn loaded subwoofer
- 2400 watts (3600 watts Peak)
- 142db Peak (136dB Continuous)
- 32-150 (Hz +/- 3dB)
- Selectable Punchy, Smooth and Deep modes
- 80Hz to 150 Hz High Frequency Roll-off
- 2 Wheels with rear tilt back
- Handles 2X top rear, 2X bottom front, 3X each side
- Pole mount adapter 1X Top (1 3/8-inch-3.5 cm)
Specifications
- System Type: Rear Horn-Loaded Subwoofer
- Active or Passive: Active
- Program Power (Watts): 2400 watts (3600 Watts Peak)
-
Max SPL (dB): 142dB Peak (136dB Continuous)
- Frequency Response (Hz +/- 3dB): 32 Hz-150 Hz
- Driver Configuration: 21"
- LF Driver(s): 21" Cast Frame Woofer with 6" Voice Coil
- LF Protection: Thermal / Overcurrent (X-max) / Clip
- Outputs: 1x 1/4" Link Output, 1x XLR Link Output
- Inputs - 1/4 IN Jacks: 1x Link Input
- Inputs - XLR: 1x XLR Input, 1x XLR Mono Blend Input
- Level Controls: Master - Sub Level
- LED Indicators: Power, Activity, Protection (Clip, X-Max, Temp)
-
Other Controls / Features:
- Mode Control (Punchy, Smooth, Deep)
- High Frequency Rolloff (10 Hz Steps from 80 Hz to 150 Hz
- Wheels: 2 (Rear Tilt-back)
- Bar Handles: 10 (2 Top Rear Edge, 2 Bottom, 3 Left Side, 3 Right Side)
- Pole Mount Adapter (1 3/8): 1 (Top)
- Enclosure Materials: 15 mm (5/8") 11-ply Russian Birch
- Grille: Perforated Metal
- Covering / Finish: Black Ultrathane Paint
- Dimensions (DWH): 30.5" x 25.5" x 36" (77.5 cm x 64.1 cm x 91 cm)
- Weight: 202 lbs / 92 kg
*2x Gator GFW-ID-SPK-SP Frameworks ID Series Subwoofer Speaker Pole
- System Type: Rear Horn-Loaded Subwoofer
- Active or Passive: Active
- Program Power (Watts): 2400 watts (3600 Watts Peak)
- Max SPL (dB): 142dB Peak (136dB Continuous)
- Frequency Response (Hz +/- 3dB): 32 Hz-150 Hz
- Driver Configuration: 21"
- LF Driver(s): 21" Cast Frame Woofer with 6" Voice Coil
- LF Protection: Thermal / Overcurrent (X-max) / Clip
- Outputs: 1x 1/4" Link Output, 1x XLR Link Output
- Inputs - 1/4 IN Jacks: 1x Link Input
- Inputs - XLR: 1x XLR Input, 1x XLR Mono Blend Input
- Level Controls: Master - Sub Level
- LED Indicators: Power, Activity, Protection (Clip, X-Max, Temp)
-
Other Controls / Features:
- Mode Control (Punchy, Smooth, Deep)
- High Frequency Rolloff (10 Hz Steps from 80 Hz to 150 Hz
- Wheels: 2 (Rear Tilt-back)
- Bar Handles: 10 (2 Top Rear Edge, 2 Bottom, 3 Left Side, 3 Right Side)
- Pole Mount Adapter (1 3/8): 1 (Top)
- Enclosure Materials: 15 mm (5/8") 11-ply Russian Birch
- Grille: Perforated Metal
- Covering / Finish: Black Ultrathane Paint
- Dimensions (DWH): 30.5" x 25.5" x 36" (77.5 cm x 64.1 cm x 91 cm)
- Weight: 202 lbs / 92 kg
*2x Gator GFW-ID-SPK-SP Frameworks ID Series Subwoofer Speaker Pole
Frameworks ID Speaker Sub Pole with Piston Driven Height Adjustment and Adapter for Traditional Mount or M20 threaded Mount
Features:
- Compact Cylinder Design
- Includes Lift-EEZ piston for lift assist
- Fits traditional sub mounts with integrated adapter for threaded M20 mounts
- Easy one handed CAM operation
- Height adjusts from 37 to 57 inches
- Ideal for use with speaker cabinets between 35-40lbs with total weight capacity of 70lbs
- Works great with the JBL VRX915S, VRX918S, SRX718S, PRX615S-XLF, PRX718XLF, PRX400, PRX600, PRX700, STX800, VRX900 and QSC KW181, KSUB, KLA181
Specifications:
- Color: Grey
Detailed Specifications:
- Minimum Height: 37.00"
- Maximum Height: 57.00"
- Weight Capacity: 70.00 pounds