Solaris Flare Q+ LR LED RGBW Linear Strobe
Solaris Flare indoor LED fixtures are combination wash/strobe/blinders with over 1000 Watts of LED RGBW brightness, 58,000 lumens, instantaneous color mixing, and 1200Hz refresh rate for smooth on-camera dimming. Q+ Technology increases the brightness with practically no fan noise. Its “Theatre Mode” is effectively silent, yet still 8% brighter than the original Flare! One Solaris Flare LED fixture does the job of many conventional LED fixtures, saving setup time and labor.
Features:
- 108 10W RGBW Cree LEDs, divided into 1, 2, 3, 4, 6, or 12 pixels
- Variable intensity control 0-100% in 8bit or 16bit control modes
- Beam spread: 36° standard. Optional beam widths available: 20°, 54°, and 70°1
- Refresh rate: 1200HZ
- Flash Duration control 0-650ms flashes per second
- Flash Rate control 0-16.7Hz (50Hz) / 0-20Hz (60Hz)
- Continuous blinder/wash effect
- Flash intensity curve selection
- User definable fades
- LCD control panel display with four control buttons
- RDM available in Flare RDM, Flare Jr, Flare Q+ and Flare Q+ LR (not available in early versions of the original Flare)
Specifications:
- WEIGHT / DIMENSIONS
- Length: 39.3” (998mm)
- Width: 4.7” (120mm)
- Height (w/o yoke): 6.9” (175mm)
- Weight: 24.3 lb.11 kg)
- POWER
- Operating Voltage: 100-277VAC 50/60Hz
- Fuse: 12A 250V slow-blow (5x20mm)
- Power consumption: 1400W
- LIGHT SOURCE
- LEDs: 108 RGBW Cree LEDs divided into 12 pixels
- Color: RGBW
- Beam spread: 36°
- Intensity control: 16bit or 8bit
- Refresh rate: 1200Hz
- AVERAGE COLOR WAVELENGTH
- Red: 625 nm
- Green: 530 nm
- Blue: 460 nm
- White: >5700K
- Refresh rate: 1200Hz
- THERMAL
- Max. ambient temperature: +104°F (+40 °C)
- Min. ambient temperature: -4 °F (-20 °C)
- Cooling: air cooled – fan
- CONTROL / PROGRAMMING
- DMX input: locking 5-pin XLR male socket
- DMX output: locking 5-pin XLR female socket
- DMX pin config: pin 1 shield, pin 2 (-), pin 3 (+), pin 4 n/a, pin 5 n/a
- Control: RDM, DMX-512, Demo, Manual Mode
- DMX Channels – Basic Mode: 3,4,6,7,8
- DMX Channels - Advanced Mode: 10,12,13,16,19,20,24,25,32,43,56
- Power Connector: Input: PowerCon 20A
- WEIGHT / DIMENSIONS
- Length: 39.3” (998mm)
- Width: 4.7” (120mm)
- Height (w/o yoke): 6.9” (175mm)
- Weight: 24.3 lb.11 kg)
- POWER
- Operating Voltage: 100-277VAC 50/60Hz
- Fuse: 12A 250V slow-blow (5x20mm)
- Power consumption: 1400W
- LIGHT SOURCE
- LEDs: 108 RGBW Cree LEDs divided into 12 pixels
- Color: RGBW
- Beam spread: 36°
- Intensity control: 16bit or 8bit
- Refresh rate: 1200Hz
- AVERAGE COLOR WAVELENGTH
- Red: 625 nm
- Green: 530 nm
- Blue: 460 nm
- White: >5700K
- Refresh rate: 1200Hz
- THERMAL
- Max. ambient temperature: +104°F (+40 °C)
- Min. ambient temperature: -4 °F (-20 °C)
- Cooling: air cooled – fan
- CONTROL / PROGRAMMING
- DMX input: locking 5-pin XLR male socket
- DMX output: locking 5-pin XLR female socket
- DMX pin config: pin 1 shield, pin 2 (-), pin 3 (+), pin 4 n/a, pin 5 n/a
- Control: RDM, DMX-512, Demo, Manual Mode
- DMX Channels – Basic Mode: 3,4,6,7,8
- DMX Channels - Advanced Mode: 10,12,13,16,19,20,24,25,32,43,56
- Power Connector: Input: PowerCon 20A