Solaris LED Flare Q+ LED RGBW Strobe Pack of 8 with Road Case
Package contains 8 fixtures with road case
Solaris Flare indoor LED fixtures are combination wash/strobe/blinders with over 1000 Watts of LED RGBW brightness, 58,000 lumens, instantaneous color mixing, and 1200Hz refresh rate for smooth on-camera dimming. Q+ Technology increases the brightness with practically no fan noise. Its “Theatre Mode” is effectively silent, yet still 8% brighter than the original Flare! One Solaris Flare LED fixture does the job of many conventional LED fixtures, saving setup time and labor.
Features:
- 96 10W RGBW Cree® LEDs, divided into 2, 3, 4, 6 or 12 pixels
- Variable intensity control 0-100% in 8bit or 16bit control modes
- Beam spread: 36° standard. Optional beam widths available: 20°, 54°, and 70°1
- Refresh rate: 1200HZ
- Flash Duration control 0-650ms flashes per second
- Flash Rate control 0-16.7Hz (50Hz) / 0-20Hz (60Hz)
- Continuous blinder/wash effect
- Flash intensity curve selection
- User definable fades
- LCD control panel display with four control buttons
- RDM available in Flare RDM, Flare Jr, Flare Q+ and Flare Q+ LR (not available in early versions of the original Flare)
Specifications:
- Weight / Dimensions:
- Length: 19.7” (500 mm)
- Width: 6.5” (164 mm)
- Height (w/yoke): 10” (257 mm)
- Weight: 22 lb.(10 kg)
- Power:
- Operating Voltage: 100-277VAC 50/60Hz
- Fuse: 12A 250V slow-blow (5x20 mm)
- Power Consumption: 1250 W
- Light Source:
- LEDs: 96 10W RBGW Cree LEDs, divided into 12 segments
- Color: RGBW
- Beam spread: 36°
- Thermal:
- Max. ambient temperature: +104 °F (+40 °C)
- Min. ambient temperature: -13 °F (-25 °C)
- Cooling: air cooled – fan
- Control / Programming:
- DMX input: locking 5-pin XLR male socket
- DMX output: locking 5-pin XLR female socket
- DMX pin config: pin 1 shield, pin 2 (-), pin 3 (+), pin 4 n/a, pin 5 n/a
- Control: RDM, DMX-512, Demo, Manual mode
- DMX Channels – Basic Mode: 3, 4, 6, 7, 8
- DMX Channels - Advanced Mode: 10,12,13,16,19,20,24,25,32,43,56
- Power Connector: Input: PowerCon 20A
- Weight / Dimensions:
- Length: 19.7” (500 mm)
- Width: 6.5” (164 mm)
- Height (w/yoke): 10” (257 mm)
- Weight: 22 lb.(10 kg)
- Power:
- Operating Voltage: 100-277VAC 50/60Hz
- Fuse: 12A 250V slow-blow (5x20 mm)
- Power Consumption: 1250 W
- Light Source:
- LEDs: 96 10W RBGW Cree LEDs, divided into 12 segments
- Color: RGBW
- Beam spread: 36°
- Thermal:
- Max. ambient temperature: +104 °F (+40 °C)
- Min. ambient temperature: -13 °F (-25 °C)
- Cooling: air cooled – fan
- Control / Programming:
- DMX input: locking 5-pin XLR male socket
- DMX output: locking 5-pin XLR female socket
- DMX pin config: pin 1 shield, pin 2 (-), pin 3 (+), pin 4 n/a, pin 5 n/a
- Control: RDM, DMX-512, Demo, Manual mode
- DMX Channels – Basic Mode: 3, 4, 6, 7, 8
- DMX Channels - Advanced Mode: 10,12,13,16,19,20,24,25,32,43,56
- Power Connector: Input: PowerCon 20A
