Sennheiser XSW-D Portable Lavalier Mic Set with SKB Case

Sennheiser XSW-D Portable Lavalier Set w/ SKB Case

• 1x Sennheiser XSW Digital Portable Lavalier Set
• 1x SKB 3i0705-3-XSW Case for Sennheiser XSW-D Systems

Sennheiser XSW Digital Portable Wireless Lavalier SetXS Wireless Digital Portable Lavalier Set. One-touch ease-of-use wireless audio set with XSW-D 3.5mm (1/8") transmitter, XSW-D 3.5mm (1/8") receiver, ME2-II clip-on lavalier mic, 3.5mm (1/8") coiled cable, cold shoe mount, belt clip and USB-A to USB-C charging cable.

One-touch ease-of-use wireless audio set that utilizes a digital transmission to seamlessly link audio sources. Equipped with an ME2-II lavalier microphone, this elegant solution makes capturing dialogue on a DSLR easier than ever before while maintaining a reliable connection.

What's in the box:

• XSW-D 3.5mm (1/8") transmitter
• XSW-D 3.5mm (1/8") receiver
• ME2-II clip-on lavalier mic
• 3.5mm (1/8") coiled cable
• Cold shoe mount
• Belt clip
• USB-A to USB-C charging cable

SKB 3i0705-3-XSW Case for Sennheiser XSW-D SystemsThe iSeries 3i0705-3-XSW case is designed to accommodate the Sennheiser XSW-D ENG Set Wireless Audio System. The interior features a custom-cut high quality PE foam that will hold the Sennheiser Mini Jack TX, XLR Female TX, and Mini Jack RX, and also includes an accessory pocket that will house the lav mic and other accessories. This custom waterproof case is made in the USA and is backed by SKB's Unconditional Lifetime Warranty.

Sennheiser XSW Digital Portable Wireless Lavalier Set Features:

• One touch ease-of-use
• 2.4 GHz digital transmission for worldwide operation
• 75m range (250ft) in optimal conditions
• Up to 5 hours battery life on a single charge
• Switch between multiple transmitters linked to one receiver
• Configure any combination of transmitters and receivers
• Mute from either transmitter or receiver

SKB 3i0705-3-XSW Case for Sennheiser XSW-D Systems Features:

• Custom cut interior for Sennheiser XSW-D ENG Set
• Accessory pocket for lav mic and other cables
• Ultra high-strength polypropylene copolymer resin
• UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
• Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
• Automatic ambient pressure equalization value (MIL-STD-648C & IP67)
• Resistant to corrosion and impact damage
• Molded-in hinge
• Trigger release latch system
• Stainless steel locking loops
• Accepts SKB’s TSA Padlocks
• Rubber over-molded cushion grip handle custom cut foam interior
• Lifetime Warranty

Sennheiser XSW Digital Portable Wireless Lavalier Set Specifications:

• Dimensions:
  • XSW-D XLR Female TX: approx. 102 x 24 x 28 mm
  • XSW-D Mini Jack TX: approx. 86 x 24 x 28 mm
  • XSW-D Instrument TX: approx. 122 x 24 x 28 mm
  • XSW-D XLR MALE RX: approx. 109 x 24 x 28 mm
  • XSW-D Mini Jack RX: approx. 86 x 24 x 28 mm
  • XSW-D Instrument RX: approx. 122 x 24 x 28 mm
  • XSW-D Pedalboard RX: approx. 130 x 82 x 51 mm
• THD, total harmonic distortion: < 0.1 %
• Charging time: typ. 3 h
• Audio output: max. 12 dBu
• Operating temperature: -10 °C to +55 °C (14 °F to 131 °F)
• Signal-to-noise ratio: ? 106 dB
• Operating time: up to 5 h
• Modulation: GFSK with TDMA
• Battery Specification: Li-Ion
• Capacity: 850 mAh
• Codecs: aptX® Live
• Frequency range: 2,400 - 2,483.5MHz
• Max. Input voltage: typ. 5.0 V
• Transmission power: max. 10 mW
• Voltage: 3.7 V
• Operating relative humidity : 95 % (non-condensing)
• Latency: < 4 ms
• Temperature Range: 0 °C - 60 °C (32 °F - 140 °F)
• Audio frequency response:
  • 3.5 mm Jack/XLR: 80 - 18,000 Hz
  • 6.3 mm Jack: 10 - 18,000 Hz

SKB 3i0705-3-XSW Case for Sennheiser XSW-D Systems Specifications:

• Exterior Length: 9.41 in
• Exterior Width: 7.82 in
• Exterior Depth: 4.35 in
• Carton Length: 10.00 in
• Carton Width: 8.25 in
• Carton Depth: 4.63 in
• Lid Depth: 0.50 in
• Base Depth: 3.25 in
• Weight: 1.28 lbs.