Sennheiser SKP 300 G3 Plug-on Mic Transmitter A

Sennheiser SKP 300 G3 Plug-on Mic Transmitter A

Plug-on transmitter that turns XLR-equipped microphones into wireless ones. Compatible with all ew 300 series receivers. Phantom powering. 1680 tunable UHF frequencies within 42MHz bandwidth. Rugged metal housing.

Flexibility is the outstanding feature of this plug-on transmitter that turns every wired microphone into a freely mobile wireless one. Thank to its phantom powering the SKP 300 G3 can be used with condenser and dynamic microphones alike. With up to 24 parallel frequency banks, switchable transmission power, wireless synchronization via infrared and, last but not least, its sturdy metal housing the SKP 300 G3 is perfectly fit for the demanding professional routine. And a crystal-clear sound is provided by the HDX compander.

What's in the box

• 1 SKP 300 G3 plug-on transmitter
• 2 AA 1.5 V batteries
• 1 instruction manual
• 1 supplementary frequency sheet
• 1 supplementary RF power sheet

Features:

• P48 phantom power for easy use of any cabled mic
• Plug-on transmitter with XLR-3F connector for quick use, no visual interference of cables
• Rugged metal housing for rough use
• Up to 42 MHz switching bandwidth for flexible use at different locations

Specifications:

• Frequency range: 516 ... 558 MHz
• Dimensions 105 x 43 x 43 mm (4.1 x 1.7 x 1.7 in)
• Compander: HDX
• Audio-XLR connector: XLR-3 female
• Frequency response: 80....18000
• THD, total harmonic distortion: < 0,9 %
• Weight: 195 g (6.9 oz) 700 g
• Phantom powering: 48 V +/- 2 V
• Signal-to-noise ratio: ? 120 dBA (@ 1 mV peak deviation)
• RF frequency range: 516..... 865 MHz
• RF output power: 10/30 mW
• Switching bandwidth: max. 42 MHz
• Peak deviation: ±48 kHz
• Nominal deviation: ±24 kHz
• In compliance with: CE, FCC, IC
• Operating time: > 8 h (30mW HF, without PG 48)
• Modulation: FM
• Carrier frequencies: 1680
• Input voltage range: mic 1,2 V max