Radial Phazer Phase Adjustment Tool

Class-A Phase AdjusterThe Phazer™ is an analog phase alignment tool that lets you bring two sounds sources together so that the fundamentals play in sync.

Features:

• Phase-On with LED: Activates the phase section. LED illuminates when engaged.
• Invert switch: Flips the phase range of the Shift control from 0° - 180° to the 181°- 360° range at the XLR output.
• Shift control: Analog control used to adjust the phase Shift
• Blend: Lets you mix the original dry signal and the wet phased signal together
• Filter-on with LED: Bypass switch for the low-pass filter. LED illuminates when engaged.
• Range switch: Selects between two frequency ranges for the low-pass filter: 300Hz to 3.8kHz range or 3kHz to 38kHz.
• Cut-off control: Adjusts the high-frequency cutoff point for the low-pass filter within the selected range.
• Power switch: Turns on the Phazer. LED illuminates when unit is active.
• Cable Lock: Used to clamp down the power supply cable to prevent accidental power disconnect.
• Power supply connection: Connection point for the included Radial 15VDC power supply.
• ¼" TRS phone jacks: Input and output connections for balanced +4dB and unbalanced -10dB signals.
• Ground Lift: Helps eliminate hum and buzz caused by ground loops. Disconnects Pin-1 at the XLR and sleeve at the ¼" TRS outputs.
• XLR jacks: Input and output connections for balanced +4dB signals.
• Full bottom pad: Neoprene no-slip pad won't scratch your surface
• 14-gauge steel enclosure: With bookend shell creates aprotective zone for the controls and switches.

Specifications:

• Audio circuit type: Active analog phase adustment
• Number of channels: Mono
• Frequency response: 20Hz ~ 20KHz (± 0.5dB)
• Dynamic range: 94dB
• Input Impedance: 10k Ohms, balanced
• Output Impedance: 2k Ohms, balanced
• Maximum Input: +11.5dBu @ 1kHz, 1% THD+N

Features

• Ground lift, LPF
• Input Connectors: XLR input, ¼" TRS input
• Output Connectors: XLR output, ¼" TRS output
• Extras: Phase Reverse

General

• Construction: 14-gauge steel
• Size (LxWxD): 4.5"x 2"x 6"(114x57x147mm)
• Weight: 2.8 lb (1.3kg)
• Shipping size (LxWxD): 4.75"x2.5"x10.75"(121x64x273mm)
• Shipping weight: 3.05 lb ( 1.4kg)
• Power: +15V DC/400mA power supply included
• Conditions: For use in dry locations only between 5°C and 40°C
• Warranty: Radial 3-year, transferable