QSC KLA12-WH Line Array Speakers (x4) with KLA181-WH Subs (x2)

QSC KLA12-WH Line Array Speakers with KLA181-WH Subwoofers

• 2x QSC KLA181-BK 1000W 18" Powered Subwoofer
• 2x QSC KW181 Pole Subwoofer Speaker Stand
• 4x QSC KLA12-BK 12" 500W 2-Way Powered Line-Array

QSC KLA12 12" 500W 2-Way Powered Line-Array SpeakerThe KLA Series brings the power and sophistication of a line array system into an easy-to-use product significantly redefining the line array product category. With its simple Lift, Click and Play approach, KLA can be deployed in a fraction of the time required by comparable line array products. The KLA12 features a highly efficient 500 watt by 500 watt power amp module and the KLA181 offers the same highly efficient power amp module in a 1,000 watt configuration. This efficient design enables up to five KLA models (any combination of KLA12 and KLA181) to be driven off of a single 15 amp, 120 volt electrical circuit. KLA loudspeakers incorporate QSC's DEEP DSP algorithm - providing extended bass response by actively managing potentially damaging low-frequency transients - and GuardRail circuitry protection which prevents the amplifier module from unnatural and destructive clipping.

QSC KLA181 1000W 18" Powered SubwooferThe KLA Series brings the power and sophistication of a line array system into an easy-to-use product significantly redefining the line array product category. With its simple Lift, Click and Play approach, KLA can be deployed in a fraction of the time required by comparable line array products. In addition to DEEP™ DSP algorithm, GuardRail™, Auto Standby, balanced line-level XLR input with an XLR "Thru" connector, Attenuation Control and LED indicators, the KLA181 subwoofer also includes a polarity switch to optimize summation between subwoofer and top-boxes.

QSC KW181 Pole Subwoofer Speaker StandThis speaker pole is designed for the KW speaker series from QSC - specifically for KW181 and KW122, KW152, or KW153 only. It measures 36" (91 cm) long with a M20 thread.

QSC KLA181 Features:

• Configuration: 18" subwoofer
• Transducers - Low Frequency: 18" cone transducer
• Frequency Response (-6 dB): 38 Hz
• Frequency Range (-10 dB): 33 Hz
• Maximum SPL (1 meter): 135 dB peak
• Power Output: 1000 W Class D continuous
• Input Impedance (ohms): XLR: 40k balanced / 20k unbalanced
• Controls: Power, Attenuation, LF Mode (Normal/DEEP™), Polarity (Normal/Reverse), Front LED (Pwr/Limit/Off)
• Indicators: Power, Signal, Standby, Limit
• Connectors: Balanced female XLR line level input, Balanced male XLR full range line level out, Remote attenuation control, Locking powerCON power connector AC In, Locking powerCON® power connector AC Out
• Cooling: On demand, 50 mm variable speed fan
• Amplifier Protection: Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
• Transducer Protection: Thermal limiting, excursion limiting
• AC Power Input: Universal power supply 100 - 240 VAC, 50 - 60 Hz
• Material: Painted birch plywood
• Finish: Black or White textured paint
• Grille: Black or White powder coated 16 gauge steel
• Dimensions (HWD): 21.6" x 23.1" x 25.7" (547mm x 586mm x 633mm)
• Weight: 100 lbs. (45.3 kg)

QSC KLA12 Features:

• 500 W x 500 W power module
• Rugged, ABS enclosure delivers lightweight durability
• SOLO Rigging System supports deployment without tools or external hardware
• Ar-Q Frequency Optimization quickly tunes the array with the click of a dial, adjusting for the appropriate number of boxes
• 10:1 design factor supports arrays of up to 480 lbs. (218 kg) 5 x KLA12 and 2 x KLA181
• 90° x 18° nominal coverage (requires only five boxes to configure a 90° x 90° array)
• High power, 12" low frequency driver provides extension down to 44Hz without subwoofers
• Extensive DSP further enhances and protects performance
• 1.75" diaphragm compression driver delivers clear and powerful high-frequency reproduction
• powerCON Input and Thru connections
• Tilt-Direct pole mount assists directivity in single-unit applications
• Configuration: Multipurpose 2-way
• Transducers - High & Low: 1.75" diaphragm compression driver & 12" cone transducer
• Frequency Response (-6 dB): 49 Hz - 18 kHz
• Frequency Range (-10 dB): 44 Hz - 20 kHz
• Nominal Coverage: 90° H x 18° V
• Maximum SPL (1 meter): 131 dB peak
• Power Output HF: 500 W Class D continuous & LF: 500 W Class D continuous
• Input Impedance (ohms) XLR: 40k balanced / 20k unbalanced
• Controls: Power, Attenuation, LF Setting (External Sub/Normal/DEEP), Array Size (1-5), Front LED (Pwr/Limit/Off)
• Indicators: Power, Signal, Standby, Limit
• Connectors: Balanced female XLR line level input, Balanced male XLR full range line level out, Remote attenuation control, Locking powerCON power connector AC In, Locking powerCON® power connector AC Out
• Cooling: On demand, 50 mm variable speed fan
• Amplifier Protection: Thermal limiting, output overcurrent, overtemperature muting, GuardRail
• Transducer Protection: Thermal limiting, excursion limiting
• AC Power Input: Universal power supply 100 - 240 VAC, 50 - 60 Hz
• Material: Impact resistant ABS
• Finish: Black or White paint
• Grille: Black or White powder coated 18 gauge steel
• Dimensions (HWD): 15.0" x 23.4" x 16.6"(382mm x 594mm x 422mm)
• Weight: 55 lbs. (25 kg)