QSC KLA12-BK Line Array Speakers (x2) with KLA181-BK Subwoofer

QSC KLA12 Line Array Speakers with KLA181 Subwoofer

• 1x QSC KLA181-BK 1000W 18" Powered Subwoofer Black
• 1x QSC KW181 Pole Subwoofer Speaker Stand
• 2x QSC KLA12-BK 12" 500W 2-Way Powered Line-Array B

QSC KLA181-BK 1000W 18" Powered Subwoofer BlackThe KLA Series brings the power and sophistication of a line array system into an easy-to-use product significantly redefining the line array product category. With its simple Lift, Click and Play approach, KLA can be deployed in a fraction of the time required by comparable line array products. In addition to DEEP™ DSP algorithm, GuardRail™, Auto Standby, balanced line-level XLR input with an XLR "Thru" connector, Attenuation Control and LED indicators, the KLA181 subwoofer also includes a polarity switch to optimize summation between subwoofer and top-boxes.

QSC KLA12-BK 12" 500W 2-Way Powered Line-Array Speaker BlackThe KLA Series brings the power and sophistication of a line array system into an easy-to-use product significantly redefining the line array product category. With its simple Lift, Click and Play approach, KLA can be deployed in a fraction of the time required by comparable line array products. The KLA12 features a highly efficient 500 watt by 500 watt power amp module and the KLA181 offers the same highly efficient power amp module in a 1,000 watt configuration. This efficient design enables up to five KLA models (any combination of KLA12 and KLA181) to be driven off of a single 15 amp, 120 volt electrical circuit. KLA loudspeakers incorporate QSC's DEEP DSP algorithm - providing extended bass response by actively managing potentially damaging low-frequency transients - and GuardRail circuitry protection which prevents the amplifier module from unnatural and destructive clipping.

QSC KW181 Pole Subwoofer Speaker StandThis speaker pole is designed for the KW speaker series from QSC - specifically for KW181 and KW122, KW152, or KW153 only. It measures 36" (91 cm) long with a M20 thread.

QSC KLA181-BK Features:

• Configuration: 18" subwoofer
• Transducers - Low Frequency: 18" cone transducer
• Frequency Response (-6 dB): 38 Hz
• Frequency Range (-10 dB): 33 Hz
• Maximum SPL (1 meter): 135 dB peak
• Power Output: 1000 W Class D continuous
• Input Impedance (ohms): XLR: 40k balanced / 20k unbalanced
• Controls: Power, Attenuation, LF Mode (Normal/DEEP™), Polarity (Normal/Reverse), Front LED (Pwr/Limit/Off)
• Indicators: Power, Signal, Standby, Limit
• Connectors: Balanced female XLR line level input, Balanced male XLR full range line level out, Remote attenuation control, Locking powerCON power connector AC In, Locking powerCON® power connector AC Out
• Cooling: On demand, 50 mm variable speed fan
• Amplifier Protection: Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
• Transducer Protection: Thermal limiting, excursion limiting
• AC Power Input: Universal power supply 100 - 240 VAC, 50 - 60 Hz
• Material: Painted birch plywood
• Finish: Black or White textured paint
• Grille: Black or White powder coated 16 gauge steel
• Dimensions (HWD): 21.6" x 23.1" x 25.7" (547mm x 586mm x 633mm)
• Weight (Net): 100 lb (45.3 kg)

QSC KLA12-BK Features:

• 500 W x 500 W power module
• Rugged, ABS enclosure delivers lightweight durability
• SOLO Rigging System supports deployment without tools or external hardware
• Ar-Q Frequency Optimization quickly tunes the array with the click of a dial, adjusting for the appropriate number of boxes
• 10:1 design factor supports arrays of up to 480 lbs. (218 kg) 5 x KLA12and 2 x KLA181
• 90° x 18° nominal coverage (requires only five boxes to configure a 90° x 90° array)
• High power, 12" low frequency driver provides extension down to 44Hz without subwoofers
• Extensive DSP further enhances and protects performance
• 1.75" diaphragm compression driver delivers clear and powerful high-frequency reproduction
• powerCON Input and Thru connections
• Tilt-Direct pole mount assists directivity in single-unit applications
• Configuration: Multipurpose 2-way
• Transducers - High & Low: 1.75" diaphragm compression driver & 12" cone transducer
• Frequency Response (-6 dB): 49 Hz - 18 kHz
• Frequency Range (-10 dB): 44 Hz - 20 kHz
• Nominal Coverage: 90° H x 18° V
• Maximum SPL (1 meter): 131 dB peak
• Power Output HF: 500 W Class D continuous & LF: 500 W Class D continuous
• Input Impedance (ohms) XLR: 40k balanced / 20k unbalanced
• Controls: Power, Attenuation, LF Setting (External Sub/Normal/DEEP), Array Size (1-5), Front LED (Pwr/Limit/Off)
• Indicators: Power, Signal, Standby, Limit
• Connectors: Balanced female XLR line level input, Balanced male XLR full range line level out, Remote attenuation control, Locking powerCON power connector AC In, Locking powerCON® power connector AC Out
• Cooling: On demand, 50 mm variable speed fan
• Amplifier Protection: Thermal limiting, output overcurrent, overtemperature muting, GuardRail
• Transducer Protection: Thermal limiting, excursion limiting
• AC Power Input: Universal power supply 100 - 240 VAC, 50 - 60 Hz
• Material: Impact resistant ABS
• Finish: Black or White paint
• Grille: Black or White powder coated 18 gauge steel
• Dimensions (HWD): 15.0" x 23.4" x 16.6"(382mm x 594mm x 422mm)
• Weight (Net):55 lbs (25 kg)