QSC KLA12 Speakers and KLA181 Subwoofer with Stands & TotesBundle Includes:
- 1x QSC KLA181-BK 1000W 18" Powered Subwoofer Black
- 1x QSC Soft Cover for KLA181 Sub
- 2x QSC KLA12-BK 12" 500W 2-Way Powered Line-Array
- 2x QSC KLA12-TOTE Padded Tote For KLA12
- 2x Ultimate TS-100 Air Powered Tripod Speaker Stand
QSC KLA12 12" 500W 2-Way Powered Line-Array Speaker BlackThe KLA Series brings the power and sophistication of a line array system into an easy-to-use product significantly redefining the line array product category. With its simple Lift, Click and Play approach, KLA can be deployed in a fraction of the time required by comparable line array products. The KLA12 features a highly efficient 500 watt by 500 watt power amp module and the KLA181 offers the same highly efficient power amp module in a 1,000 watt configuration. This efficient design enables up to five KLA models (any combination of KLA12 and KLA181) to be driven off of a single 15 amp, 120 volt electrical circuit. KLA loudspeakers incorporate QSC's DEEP DSP algorithm - providing extended bass response by actively managing potentially damaging low-frequency transients - and GuardRail circuitry protection which prevents the amplifier module from unnatural and destructive clipping.
QSC KLA181 1000W 18" Powered Subwoofer BlackThe KLA Series brings the power and sophistication of a line array system into an easy-to-use product significantly redefining the line array product category. With its simple Lift, Click and Play approach, KLA can be deployed in a fraction of the time required by comparable line array products. In addition to DEEP™ DSP algorithm, GuardRail™, Auto Standby, balanced line-level XLR input with an XLR "Thru" connector, Attenuation Control and LED indicators, the KLA181 subwoofer also includes a polarity switch to optimize summation between subwoofer and top-boxes.
Ultimate TS-100 Air Powered Tripod Speaker StandOther speaker stands have aspired to it, but none have reached the same immaculate level of engineering as the Air-Powered Series speaker stands from Ultimate Support. Extraordinarily strong, tenaciously sturdy, lightweight, and 100% field serviceable only begin to describe what makes the TS100B Hydraulic Speaker Stand great. Driven by a passion for innovation resulting in many arduous years of R&D, the Air-Powered Series feature an internal shock that lifts speakers weighing 50 lbs or less with no effort, and requires the effort of just a single hand to raise speakers weighing more than 50 lbs! There are three models to choose from: the TS-100B, the TS-110B, which offers additional height, and the TS-110BL, which also offers additional height plus a leveling leg that allows the speaker stand to stay level on any uneven surface you may encounter, whether it be stairs or the side of a mountain (though we would advise against the latter).
QSC KLA181 Features: - Configuration: 18" subwoofer
- Transducers - Low Frequency: 18" cone transducer
- Frequency Response (-6 dB): 38 Hz
- Frequency Range (-10 dB): 33 Hz
- Maximum SPL (1 meter): 135 dB peak
- Power Output: 1000 W Class D continuous
- Input Impedance (ohms): XLR: 40k balanced / 20k unbalanced
- Controls: Power, Attenuation, LF Mode (Normal/DEEP™), Polarity (Normal/Reverse), Front LED (Pwr/Limit/Off)
- Indicators: Power, Signal, Standby, Limit
- Connectors: Balanced female XLR line level input, Balanced male XLR full range line level out, Remote attenuation control, Locking powerCON power connector AC In, Locking powerCON® power connector AC Out
- Cooling: On demand, 50 mm variable speed fan
- Amplifier Protection: Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
- Transducer Protection: Thermal limiting, excursion limiting
- AC Power Input: Universal power supply 100 - 240 VAC, 50 - 60 Hz
- Material: Painted birch plywood
- Finish: Black or White textured paint
- Grille: Black or White powder coated 16 gauge steel
- Dimensions (HWD): 21.6" x 23.1" x 25.7" (547mm x 586mm x 633mm)
- Weight: 100 lbs. (45.3 kg)
QSC KLA12 Features: - 500 W x 500 W power module
- Rugged, ABS enclosure delivers lightweight durability
- SOLO Rigging System supports deployment without tools or external hardware
- Ar-Q Frequency Optimization quickly tunes the array with the click of a dial, adjusting for the appropriate number of boxes
- 10:1 design factor supports arrays of up to 480 lbs. (218 kg) 5 x KLA12 and 2 x KLA181
- 90° x 18° nominal coverage (requires only five boxes to configure a 90° x 90° array)
- High power, 12" low frequency driver provides extension down to 44Hz without subwoofers
- Extensive DSP further enhances and protects performance
- 1.75" diaphragm compression driver delivers clear and powerful high-frequency reproduction
- powerCON Input and Thru connections
- Tilt-Direct pole mount assists directivity in single-unit applications
- Configuration: Multipurpose 2-way
- Transducers - High & Low: 1.75" diaphragm compression driver & 12" cone transducer
- Frequency Response (-6 dB): 49 Hz - 18 kHz
- Frequency Range (-10 dB): 44 Hz - 20 kHz
- Nominal Coverage: 90° H x 18° V
- Maximum SPL (1 meter): 131 dB peak
- Power Output HF: 500 W Class D continuous & LF: 500 W Class D continuous
- Input Impedance (ohms) XLR: 40k balanced / 20k unbalanced
- Controls: Power, Attenuation, LF Setting (External Sub/Normal/DEEP), Array Size (1-5), Front LED (Pwr/Limit/Off)
- Indicators: Power, Signal, Standby, Limit
- Connectors: Balanced female XLR line level input, Balanced male XLR full range line level out, Remote attenuation control, Locking powerCON power connector AC In, Locking powerCON power connector AC Out
- Cooling: On demand, 50 mm variable speed fan
- Amplifier Protection: Thermal limiting, output overcurrent, overtemperature muting, GuardRail
- Transducer Protection: Thermal limiting, excursion limiting
- AC Power Input: Universal power supply 100 - 240 VAC, 50 - 60 Hz
- Material: Impact resistant ABS
- Finish: Black or White paint
- Grille: Black or White powder coated 18 gauge steel
- Dimensions (HWD): 15.0" x 23.4" x 16.6"(382mm x 594mm x 422mm)
- Weight: 55 lbs. (25 kg)
Ultimate TS-100 Features: - Height: 3'8" - 6'7" / 1118 mm - 2007 mm
- Weight: 12.1 lbs. / 5.5 kg
- Base diameter: 47" / 1194mm
- Telescoping tube diameter: 1.5" / 38mm
- Adapter diameter: 1.375" / 35mm
- Load capacity: 150 lbs. / 68.2 kg
- Folded: 43.5" x 5.5" / 1105mm x 140mm
QSC KLA12-TOTE Padded Tote For KLA12 Features: - Soft padded tote for the KLA12 Loudspeaker
- Made with heavy-duty Nylon/Cordura material
QSC Soft Cover for KLA181 Subwoofer Features: - Soft, padded cover
- made with weather resistant, heavy-duty Nylon/Cordura material
- Fits KLA181 Subwoofer
- 500 W x 500 W power module
- Rugged, ABS enclosure delivers lightweight durability
- SOLO Rigging System supports deployment without tools or external hardware
- Ar-Q Frequency Optimization quickly tunes the array with the click of a dial, adjusting for the appropriate number of boxes
- 10:1 design factor supports arrays of up to 480 lbs. (218 kg) 5 x KLA12 and 2 x KLA181
- 90° x 18° nominal coverage (requires only five boxes to configure a 90° x 90° array)
- High power, 12" low frequency driver provides extension down to 44Hz without subwoofers
- Extensive DSP further enhances and protects performance
- 1.75" diaphragm compression driver delivers clear and powerful high-frequency reproduction
- powerCON Input and Thru connections
- Tilt-Direct pole mount assists directivity in single-unit applications
- Configuration: Multipurpose 2-way
- Transducers - High & Low: 1.75" diaphragm compression driver & 12" cone transducer
- Frequency Response (-6 dB): 49 Hz - 18 kHz
- Frequency Range (-10 dB): 44 Hz - 20 kHz
- Nominal Coverage: 90° H x 18° V
- Maximum SPL (1 meter): 131 dB peak
- Power Output HF: 500 W Class D continuous & LF: 500 W Class D continuous
- Input Impedance (ohms) XLR: 40k balanced / 20k unbalanced
- Controls: Power, Attenuation, LF Setting (External Sub/Normal/DEEP), Array Size (1-5), Front LED (Pwr/Limit/Off)
- Indicators: Power, Signal, Standby, Limit
- Connectors: Balanced female XLR line level input, Balanced male XLR full range line level out, Remote attenuation control, Locking powerCON power connector AC In, Locking powerCON power connector AC Out
- Cooling: On demand, 50 mm variable speed fan
- Amplifier Protection: Thermal limiting, output overcurrent, overtemperature muting, GuardRail
- Transducer Protection: Thermal limiting, excursion limiting
- AC Power Input: Universal power supply 100 - 240 VAC, 50 - 60 Hz
- Material: Impact resistant ABS
- Finish: Black or White paint
- Grille: Black or White powder coated 18 gauge steel
- Dimensions (HWD): 15.0" x 23.4" x 16.6"(382mm x 594mm x 422mm)
- Weight: 55 lbs. (25 kg)
Ultimate TS-100 Features: - Height: 3'8" - 6'7" / 1118 mm - 2007 mm
- Weight: 12.1 lbs. / 5.5 kg
- Base diameter: 47" / 1194mm
- Telescoping tube diameter: 1.5" / 38mm
- Adapter diameter: 1.375" / 35mm
- Load capacity: 150 lbs. / 68.2 kg
- Folded: 43.5" x 5.5" / 1105mm x 140mm
QSC KLA12-TOTE Padded Tote For KLA12 Features: - Soft padded tote for the KLA12 Loudspeaker
- Made with heavy-duty Nylon/Cordura material
QSC Soft Cover for KLA181 Subwoofer Features: - Soft, padded cover
- made with weather resistant, heavy-duty Nylon/Cordura material
- Fits KLA181 Subwoofer
- Soft padded tote for the KLA12 Loudspeaker
- Made with heavy-duty Nylon/Cordura material