Q-SYS SR-1290 High-Out 12-inch 2-Way Coaxial Cinema Surround Loudspeaker
The SR-1290 is a high-power, compact cinema surround loudspeaker designed to meet the requirements of new immersive sound formats. It features a high-power, long-throw 12” (305 mm) low-frequency transducer with a coaxially-mounted 1.75” (44 mm) titanium diaphragm compression driver. The coaxial alignment of the drivers reduces cabinet size while maximizing output capability and creating a “point source” radiation characteristic for perfectly aligned frequencies through the crossover region, ensuring superior sound quality. The coaxial design also produces a conical dispersion pattern, allowing the enclosure to be rotated without affecting the coverage pattern.
The loudspeaker’s 4-ohm impedance rating enables it to draw more power from the amplifier than an 8-ohm loudspeaker. For object-based audio formats, where each surround loudspeaker requires a separate channel, this ensures maximum output from lower-powered, cost-effective multi-channel amplifiers.
The SR-1290 is designed for safe and secure overhead mounting. The cabinet is constructed from 15-mm Baltic birch plywood with internal bracing for enhanced structural integrity. Six threaded insert mounting points on the rear panel accommodate standard bolt patterns for most third-party brackets. Four centered mounting points allow for the use of a multiple-angle aiming bracket for ceiling applications requiring direct downward aiming. Pre-installed speaker-side hardware enables quick, single-installer wall mounting, with brackets supporting down-angles of 15° (standard) or 23° (optional). A traditional U-bracket (YM-400) is also available.
The SR-1290 features a compact black enclosure with styling consistent with other SR family surround loudspeakers, enabling a cohesive aesthetic when combining models, such as using SR-1290 in front-screen locations and SR-1030 on side and rear walls.
Features:
- High performance for large cinemas
- 12" (305 mm) woofer with 2.5" (63 mm) voice coil
- 1.75” voice coil (44 mm) coaxially-mounted high frequency driver
- Pre-installed speaker-side mounting hardware for fast, easy, and secure installation. Use with QM-SW or QM-BW for wall mounting (sold separately).
- Very high-power handling meets the demands of object-based immersive audio formats
- Low impedance rating enables it to draw more power from amplifiers, allowing use of lower power, less costly amplifiers.
Specifications:
- Frequency Range (-10 dB, Half space): 50 Hz to 20 kHz
- Rated Coverage Angle (-6 dB): 90° conical (averaged from 1 kHz to 8 kHz)
- Maximum Rated SPL:
- Calculated Peak at rated power: 128 dB
- Calculated Continuous: 122 dB
- Rated Impedance: 4 ohms
- Rated Noise Power:
- Recommended Amplifier Power: 400 watts continuous
- 800 watts
- Sensitivity (1 W at 1 m, free-field): 96 dB
- Transducers:
- 12” (305 mm) LF driver with coaxially-mounted
- 1.75” (44 mm) voice coil HF compression driver
- Enclosure: 15 mm Baltic birch plywood, non-reflective black vinyl
- Dimensions (H × W × D):
- Inches: 20.1 x 15.75 x 12.1
- Millimeters: 511 x 400 x 308
- Weight:
- 36.5 lb
- 16.5 kg
- Frequency Range (-10 dB, Half space): 50 Hz to 20 kHz
- Rated Coverage Angle (-6 dB): 90° conical (averaged from 1 kHz to 8 kHz)
- Maximum Rated SPL:
- Calculated Peak at rated power: 128 dB
- Calculated Continuous: 122 dB
- Rated Impedance: 4 ohms
- Rated Noise Power:
- Recommended Amplifier Power: 400 watts continuous
- 800 watts
- Sensitivity (1 W at 1 m, free-field): 96 dB
- Transducers:
- 12” (305 mm) LF driver with coaxially-mounted
- 1.75” (44 mm) voice coil HF compression driver
- Enclosure: 15 mm Baltic birch plywood, non-reflective black vinyl
- Dimensions (H × W × D):
- Inches: 20.1 x 15.75 x 12.1
- Millimeters: 511 x 400 x 308
- Weight:
- 36.5 lb
- 16.5 kg
