Meyer Sound MICA Powered Line Array Loudspeaker
MICA™ is a self-powered, three-way loudspeaker designed for vertical curvilinear arraying. A member of the MILO® family of high-power curvilinear array loudspeakers, the MICA loudspeaker is ideal for applications that do not require quite as much power and throw distance as MILO and where weight and size is a concern. The MICA compact highpower curvilinear array loudspeaker is equally applicable in a wide variety of applications such as touring, rental and fixed installations. MICA provides an excellent complement to a MILO main system for tours that are playing a variety of venues, being used as sidefills for large arenas and sheds and as the main system for smaller venues.
Features:
- Very high power-to-size ratio
- Exceptional fidelity and transient response for intelligibility and high-impact
- Seamless integration with MILO
- Wide and even horizontal coverage pattern across the full bandwidth
- QuickFly rigging system with new captive GuideALinks simplifies use in flown or ground-stacked arrays
Specifications:
- Acoustical
- Operating Frequency Range1: 60 Hz – 18 kHz
- Frequency Response2: 75 Hz - 17 kHz ±4 dB
- Phase Response: 1 kHz – 16 kHz ±30°
- Maximum Peak SPL3: 138 dB
- Dynamic Range: >110 dB
- Coverage
- Horizontal Coverage: 100°
- Vertical Coverage: Varies, depending on array length and configuration
- Crossover4
- 1000 Hz
- Transducers
- Low Frequency:
- Two high-power 10" cone drivers with neodymium magnets
- Nominal impedance: 4 Ω
- Voice coil size: 2"
- Power handling capability: 1200 W (AES)5; 1800 W peak6>
- High Frequency7:
- 3" compression driver
- Nominal impedance: 8 Ω
- Voice coil size: 3"
- Diaphragm size: 3"
- Exit size: 1.2"
- Power handling capability: 360 W (AES)5; 720 W peak6
- Audio Input
- Type: Differential, electronically balanced
- Maximum Common Mode Range: ±15 V DC, clamped to earth for voltage transient protection
- Connectors: Female XLR input with male XLR loop output or VEAMall-in-one connector (integrates AC, audio and network)
- Input Impedance: 10 kΩ differential between pins 2 and 3
- Wiring:
- Pin 1: Chassis/earth through 220 kΩ, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies
- Pin 2: Signal +
- Pin 3: Signal –
- Case: Earth ground and chassis
- DC Blocking: None on output, DC blocked through signal processing
- CMRR: >50 dB, typically 80 dB (50 Hz – 500 Hz)
- RF Filter: Common mode: 425 kHz; Differential mode: 142 kHz
- TIM Filter: Integral to signal processing (<80 kHz)
- Nominal Input Sensitivity: 0 dBV (1.0 V rms, 1.4 V peak) continuous is typically the onset of limiting for noise and music
- Input Level: Audio source must be capable of producing +20 dBV (10 V rms, 14 V peak) into 600 Ω in order to produce maximum peak SPL over the operating bandwidth of the loudspeaker
- Amplifier
- Type: Four-channel complementary MOSFET output stages (class AB/H)
- Output Power8: 3020 W (four channels; 2 x 950 W, 2 x 560 W)
- Total Output9: 6000 W peak
- THD, IM, TIM: <.02%
- Load Capacity: 4 Ω low and mid channels; 8 Ω high channels
- Cooling: Forced air cooling, four fans (two ultrahigh-speed reserve fans)
- AC Power
- Connector: 250 V AC NEMA L6-20 twistlock, IEC-309 male, PowerCon, or VEAM
- Voltage Selection: Automatic, two ranges, each with high-low voltage tap (uninterrupted)
- Safety Agency Rated Operating Range: 95 V AC - 125 V AC; 208 V AC - 235 V AC, 50/60 Hz
- Turn-on and Turn-off Points: 85 V AC - 134 V AC; 165 V AC - 264 V AC
- Idle Current: 1.1 A rms (115 V AC); 0.55 A rms (230 V AC); 1.3 A rms (100 V AC)
- Maximum Long-Term Continuous Current (>10 sec): 5.4 A rms (115 V AC); 2.7 A rms (230 V AC); 6.2 A rms (100 V AC)
- Burst Current (<1 sec)10: 8.7 A rms (115 V AC), 4.3 A rms (230 V AC), 10.0 A rms (100 V AC))
- Ultimate Short-Term Peak Current Draw: 24.6 A rms (115 V AC), 12.3 A rms (230 V AC), 28.3 A rms (100 V AC)
- Inrush Current: 7.1 A peak (115 V AC); 11 A rms (115 and 100 V AC), 15 A rms (230 V AC)
- RMS Network (optional)
- Equipped with two-conductor twisted-pair network, reporting all operating parameters of amplifiers to system operator’s host computer
- Physical
- Dimensions: 41.40" w x 13.37" h x 17.78" d (1052 mm x 340 mm x 452 mm)
- Weight: 150 lbs (68.04 kg)
- Enclosure: Premium birch plywood
- Finish: Black textured
- Protective Grille: Powder-coated hex-stamped steel
- Rigging: MRF-MICA rigging frame, with captive GuideALink connectors and quick release pins
- Acoustical
- Operating Frequency Range1: 60 Hz – 18 kHz
- Frequency Response2: 75 Hz - 17 kHz ±4 dB
- Phase Response: 1 kHz – 16 kHz ±30°
- Maximum Peak SPL3: 138 dB
- Dynamic Range: >110 dB
- Coverage
- Horizontal Coverage: 100°
- Vertical Coverage: Varies, depending on array length and configuration
- Crossover4
- 1000 Hz
- Transducers
- Low Frequency:
- Two high-power 10" cone drivers with neodymium magnets
- Nominal impedance: 4 Ω
- Voice coil size: 2"
- Power handling capability: 1200 W (AES)5; 1800 W peak6>
- High Frequency7:
- 3" compression driver
- Nominal impedance: 8 Ω
- Voice coil size: 3"
- Diaphragm size: 3"
- Exit size: 1.2"
- Power handling capability: 360 W (AES)5; 720 W peak6
- Low Frequency:
- Audio Input
- Type: Differential, electronically balanced
- Maximum Common Mode Range: ±15 V DC, clamped to earth for voltage transient protection
- Connectors: Female XLR input with male XLR loop output or VEAMall-in-one connector (integrates AC, audio and network)
- Input Impedance: 10 kΩ differential between pins 2 and 3
- Wiring:
- Pin 1: Chassis/earth through 220 kΩ, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies
- Pin 2: Signal +
- Pin 3: Signal –
- Case: Earth ground and chassis
- DC Blocking: None on output, DC blocked through signal processing
- CMRR: >50 dB, typically 80 dB (50 Hz – 500 Hz)
- RF Filter: Common mode: 425 kHz; Differential mode: 142 kHz
- TIM Filter: Integral to signal processing (<80 kHz)
- Nominal Input Sensitivity: 0 dBV (1.0 V rms, 1.4 V peak) continuous is typically the onset of limiting for noise and music
- Input Level: Audio source must be capable of producing +20 dBV (10 V rms, 14 V peak) into 600 Ω in order to produce maximum peak SPL over the operating bandwidth of the loudspeaker
- Amplifier
- Type: Four-channel complementary MOSFET output stages (class AB/H)
- Output Power8: 3020 W (four channels; 2 x 950 W, 2 x 560 W)
- Total Output9: 6000 W peak
- THD, IM, TIM: <.02%
- Load Capacity: 4 Ω low and mid channels; 8 Ω high channels
- Cooling: Forced air cooling, four fans (two ultrahigh-speed reserve fans)
- AC Power
- Connector: 250 V AC NEMA L6-20 twistlock, IEC-309 male, PowerCon, or VEAM
- Voltage Selection: Automatic, two ranges, each with high-low voltage tap (uninterrupted)
- Safety Agency Rated Operating Range: 95 V AC - 125 V AC; 208 V AC - 235 V AC, 50/60 Hz
- Turn-on and Turn-off Points: 85 V AC - 134 V AC; 165 V AC - 264 V AC
- Idle Current: 1.1 A rms (115 V AC); 0.55 A rms (230 V AC); 1.3 A rms (100 V AC)
- Maximum Long-Term Continuous Current (>10 sec): 5.4 A rms (115 V AC); 2.7 A rms (230 V AC); 6.2 A rms (100 V AC)
- Burst Current (<1 sec)10: 8.7 A rms (115 V AC), 4.3 A rms (230 V AC), 10.0 A rms (100 V AC))
- Ultimate Short-Term Peak Current Draw: 24.6 A rms (115 V AC), 12.3 A rms (230 V AC), 28.3 A rms (100 V AC)
- Inrush Current: 7.1 A peak (115 V AC); 11 A rms (115 and 100 V AC), 15 A rms (230 V AC)
- RMS Network (optional)
- Equipped with two-conductor twisted-pair network, reporting all operating parameters of amplifiers to system operator’s host computer
- Physical
- Dimensions: 41.40" w x 13.37" h x 17.78" d (1052 mm x 340 mm x 452 mm)
- Weight: 150 lbs (68.04 kg)
- Enclosure: Premium birch plywood
- Finish: Black textured
- Protective Grille: Powder-coated hex-stamped steel
- Rigging: MRF-MICA rigging frame, with captive GuideALink connectors and quick release pins