Meyer Sound LYONW Wide Line Array Powered Speaker
The self-powered LYON™ linear line array loudspeaker is a member of Meyer Sound’s LEO® family of linear loudspeakers, designed to reproduce audio faithfully with tremendous power and clarity, without coloring the sound, even when pushed to the limit. LYON delivers the same headroom and precision as the acclaimed LEO-M™ with the same cutting-edge technology housed in a lighter and more compact cabinet.
Features:
- Integrates seamlessly with Meyer Sound’s LEO-M line array loudspeakers, and the 1100-LFC and VLFC low frequency control elements.
- Delivers high peak power output with exceptional linearity and transient reproduction at any operating level
- Offers simplified setup and increased reliability via self-powered design
Specifications
- ACOUSTICAL
- Operating Frequency Range: 55 Hz – 16.5 kHz
- Phase Response: 80 Hz – 16 kHz ±30°
- Linear Peak SPL:
- 143.5 dB with crest factor
- >17.5 dB (M-noise), 136.5 dB (Pink noise), 138.5 dB (B-noise)
- COVERAGE
- Horizontal Coverage: 110°
- Vertical Coverage: Varies, depending on array length and configuration; LYON-WXT has extended vertical coverage.
- TRANSDUCERS
- Low Frequency: Two 12-inch long-excursion cone drivers; 4 Ω nominal impedance
- High Frequency: Two 3-inch diaphragm compression drivers coupled to a constant-directivity horn through a patented REM manifold; 16 Ω nominal impedance
- AUDIO INPUT
- Type: Differential, electronically balanced
- Maximum Common Mode Range: ±15 V DC, clamped to earth for voltage transient protection
- Connectors: XLR 5-pin female input with male loop output; XLR 3-pin female connectors available to accommodate only balanced audio (no RMS signals)
- Input Impedance: 10 kΩ differential between pins 2 and 3
- Wiring:
- Pin 1: Chassis/earth through 1 kΩ, 1000 pF, 15 V clamped network to provide virtual ground lift at audio frequencies
- Pin 2: Signal +
- Pin 3: Signal -
- Pin 4: RMS
- Pin 5: RMS
- Case: Earth ground and chassis
- Nominal Input Sensitivity: 0 dBV (1 V rms) continuous is typically the onset of limiting for noise and music
- Input Level: Audio source must be capable of producing of +20 dBV (10 V rms) into 50 Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker.
- AMPLIFIERS
- Type: 3-channel complementary MOSFET output stages (class AB/H bridged)
- Total Output Power: 8500 W peak
- THD, IM, TIM: < 0.02%
- Cooling: Two ultra high-speed primary fans; two ultra high-speed reserve fans
- AC POWER
- Connector: powerCON 32
- Automatic Voltage Selection: 95–125 V AC, 50–60 Hz; 208–235 V AC, 50–60 Hz
- Safety Rated Voltage Range: 100-240 V AC, 50–60 Hz
- Turn-on and Turn-off Points: Turn-on: 85 V AC; Turn-off: 134 V AC; Turn-on: 165 V AC; Turn-off: 264 V AC
- CURRENT DRAW
- Idle Current: 1.2 A rms (115 V AC); 0.6 A rms (230 V AC); 0.7 A rms (208 V AC)
- Max Long-Term Continuous Current (>10 sec): 11.2 A rms (115 V AC); 5.6 A rms (230 V AC); 6.2 A rms (208 V AC)
- Burst Current (<1 sec): 15.4 A rms (115 V AC); 7.5 A rms (230 V AC); 8.2 A rms (208 V AC)
- Maximum Instantaneous Peak Current: 45 A peak (115 V AC); 23 A peak (230 V AC); 25 A peak (208 V AC)
- Inrush Current: < 15 A peak
- RMS NETWORK
- Equipped with two-conductor, twisted-pair network; reports all amplifier operating parameters to host computers
- PHYSICAL
- Dimensions: W: 38.15 in (969 mm) x H: 14.85 in (377 mm) x D: 21.00 in (533 mm)
- Weight: 199 lbs. (90.3 kg)
- Enclosure: Premium multi-ply birch, slightly textured black finish
- Protective Grille: Powder-coated, hex-stamped steel with acoustical black mesh
- Rigging: End frames with captive GuideALinks secured with 0.4375 in x 0.090 in quick-release pins that allow 0.5°–9° splay angles; Detachable side handles
- ACOUSTICAL
- Operating Frequency Range: 55 Hz – 16.5 kHz
- Phase Response: 80 Hz – 16 kHz ±30°
- Linear Peak SPL:
- 143.5 dB with crest factor
- >17.5 dB (M-noise), 136.5 dB (Pink noise), 138.5 dB (B-noise)
- COVERAGE
- Horizontal Coverage: 110°
- Vertical Coverage: Varies, depending on array length and configuration; LYON-WXT has extended vertical coverage.
- TRANSDUCERS
- Low Frequency: Two 12-inch long-excursion cone drivers; 4 Ω nominal impedance
- High Frequency: Two 3-inch diaphragm compression drivers coupled to a constant-directivity horn through a patented REM manifold; 16 Ω nominal impedance
- AUDIO INPUT
- Type: Differential, electronically balanced
- Maximum Common Mode Range: ±15 V DC, clamped to earth for voltage transient protection
- Connectors: XLR 5-pin female input with male loop output; XLR 3-pin female connectors available to accommodate only balanced audio (no RMS signals)
- Input Impedance: 10 kΩ differential between pins 2 and 3
- Wiring:
- Pin 1: Chassis/earth through 1 kΩ, 1000 pF, 15 V clamped network to provide virtual ground lift at audio frequencies
- Pin 2: Signal +
- Pin 3: Signal -
- Pin 4: RMS
- Pin 5: RMS
- Case: Earth ground and chassis
- Nominal Input Sensitivity: 0 dBV (1 V rms) continuous is typically the onset of limiting for noise and music
- Input Level: Audio source must be capable of producing of +20 dBV (10 V rms) into 50 Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker.
- AMPLIFIERS
- Type: 3-channel complementary MOSFET output stages (class AB/H bridged)
- Total Output Power: 8500 W peak
- THD, IM, TIM: < 0.02%
- Cooling: Two ultra high-speed primary fans; two ultra high-speed reserve fans
- AC POWER
- Connector: powerCON 32
- Automatic Voltage Selection: 95–125 V AC, 50–60 Hz; 208–235 V AC, 50–60 Hz
- Safety Rated Voltage Range: 100-240 V AC, 50–60 Hz
- Turn-on and Turn-off Points: Turn-on: 85 V AC; Turn-off: 134 V AC; Turn-on: 165 V AC; Turn-off: 264 V AC
- CURRENT DRAW
- Idle Current: 1.2 A rms (115 V AC); 0.6 A rms (230 V AC); 0.7 A rms (208 V AC)
- Max Long-Term Continuous Current (>10 sec): 11.2 A rms (115 V AC); 5.6 A rms (230 V AC); 6.2 A rms (208 V AC)
- Burst Current (<1 sec): 15.4 A rms (115 V AC); 7.5 A rms (230 V AC); 8.2 A rms (208 V AC)
- Maximum Instantaneous Peak Current: 45 A peak (115 V AC); 23 A peak (230 V AC); 25 A peak (208 V AC)
- Inrush Current: < 15 A peak
- RMS NETWORK
- Equipped with two-conductor, twisted-pair network; reports all amplifier operating parameters to host computers
- PHYSICAL
- Dimensions: W: 38.15 in (969 mm) x H: 14.85 in (377 mm) x D: 21.00 in (533 mm)
- Weight: 199 lbs. (90.3 kg)
- Enclosure: Premium multi-ply birch, slightly textured black finish
- Protective Grille: Powder-coated, hex-stamped steel with acoustical black mesh
- Rigging: End frames with captive GuideALinks secured with 0.4375 in x 0.090 in quick-release pins that allow 0.5°–9° splay angles; Detachable side handles
