Martin VC-Grid 8x8 60 RGB Creative LED Video Tile

Martin VC-Grid 8x8 60 RGB Creative LED Video Tile

The VC-Grid 60 is an ultra-light-weight LED video module with a 60 mm pixel pitch. Useful in creating customized LED video solutions with maximum artistic flexibility and a minimum of effort, the VC-Grid’s compact size makes it extremely suitable for integration into stage designs, set elements, creative ceilings, lobbies and much more. Used with or without a front diffuser, multiple VC-Grids can be combined in a countless variety of ways for ultimate design freedom. A combined power/data cable allows VC-Grids to be daisy-chained for easy setup and less cabling.

Features:

• 60 mm pixel pitch
• 64/16 individually controllable pixels
• DMX Control
• P3 Control with VideoMapping
• Hybrid DMX + P3 Control (toggle in real-time between DMX, PixelMapping and VideoMapping using P3 Switch channel)
• 750 nits of brightness
• 2250 lumen per square meter
• High-quality 16-bit per color image processing technology
• Pixel-level brightness and color calibration for optimal image quality and matching between products
• Intuitive mapping and addressing via P3 System Controller
• Combined power/data input (single cable for power and data input)
• Combined power/data thru (to daisy-chain multiple VC-Grids)
• Supported by integrated power and data processor (P3 PowerPort 1500 or DMX PowerPort 375) and simple cabling system
• Custom designs available on request (pixel pitch and module dimensions)
• Compatible with VC-Strip 60

Specifications:

• Physical:
  • Length: 480 mm (18.9 in.)
  • Width: 480 mm (18.9 in.)
  • Height: 15 mm (0.6 in.)
  • Weight: 500 g (1.1 lbs.)
• Control and Programming:
  • Control resolution: 16-bit (P3) or 8-bit (DMX) control of each color
  • Control options: Martin P3™ System Controller (via Martin P3 PowerPort™) or DMX
  • Protocol detection: Automatic
  • Setting and addressing: Martin P3™ System Controller or RDM-compliant controller
  • Color and intensity calibration: Pixel-level
  • DMX compliance: USITT DMX512-A
  • RDM compliance: ANSI/ESTA E1.20
  • Firmware update: Via Martin P3™ System Controller
  • Control modes, direct DMX control:
    • Module and Pixel
  • DMX channels, direct DMX control:
    • 3/48/192
  • Control modes, DMX via P3:
    • P3 Intensity, P3 RGB, P3 Basic, P3 Hybrid and P3 PixelMap
  • DMX channels, DMX via P3:
    • Wide range of options from 1 to 195
• Control/User Interface:
  • Device status: Multi-color visual indication
  • Device test and reset: Pushbutton to call up local test patterns and reset device
• Optics:
  • Minimum LED lifetime: 50,000 hours (to >70% luminous output)*
  • Binning: Tight color and flux binning
  • Calibration: Full Gamut Pixel Calibration
  • *Figure obtained under manufacturer's test conditions.
• Photometric Data:
  • Color resolution: 16 bits per color (48 bits per pixel)
  • Viewing angle: 120° x 120° (half-peak)
  • Pitch (pixel center-to-center): 60.00 mm
  • Total output, calibrated mode: 750 nits (fixtures placed in continuous surface)
  • Luminous output, calibrated mode: 2250 lumen per square meter
  • LED Array VC-Grid 60 8x8: 8 x 8
  • LED Array VC-Grid 60 4x4: 4 x 4
• P3 Video Processing:
  • Brightness control
  • Gamma correction and control
  • Color temperature control
  • Color space control
  • Calibration processing
  • Synchronization
• Signal Protocol:
  • Martin P3 (via Martin P3™ PowerPort) or DMX (direct)
• Construction:
  • Base: Black FR4 circuit board
  • Transparency through module (unmasked area):
    • 8x8 models: 49%
    • 4x4 models: 53%
  • Protection rating: IP20
  • RoHS compliant
• Installation:
  • Mounting: Mounting holes in module
  • Orientation: Any
  • Maximum number of VC-Grid™ modules per daisy-chain:
    • 8x8 60 modules: 12
    • 4x4 60 modules: 45
  • Connections:
    • Power & data input: 4-pin Molex connector
    • Power & data thru: 4-pin Molex connector
• Electrical:
  • Nominal input voltage: 48 VDC +/- 4%
  • Power supply options:
    • Martin P3™ PowerPort 1500
    • DMX PowerPort 375
    • Martin™ IP66 PSU 240W
    • Generic 48 VDC PSU
  • Maximum power consumption, all LEDs at full intensity:
    • VC-Grid 60 4x4: 6.7 W
    • VC-Grid 60 8x8: 25 W
• Thermal:
  • Cooling: Convection
  • Maximum ambient temperature (Ta max.): 45° C
  • Minimum ambient temperature (Ta min.): -20° C
  • Maximum total heat dissipation, calculated, +/- 10%:
    • VC-Grid 60 8x8: 85 BTU/hr
    • VC-Grid 60 4x4: 23 BTU/hr
• Environmental:
  • RoHS: Compliant
  • REACH: Compliant
  • WEEE: Compliant
  • Proposition 65: Compliant