Martin VC-Grid 16x16 15 RGB Creative LED Video Tile
The VC-Grid 15 is a small, 240 x 240 mm LED video module with a 15 mm pixel pitch. Useful in creating customized LED video solutions with maximum artistic flexibility and a minimum of effort, the VC-Grid’s compact size makes it extremely suitable for integration into stage designs, set elements, creative ceilings, lobbies and much more. Used with or without a front diffuser, multiple VC-Grids can be combined in a countless variety of ways for ultimate design freedom. A combined power/data cable allows VC-Grids to be daisy-chained for easy setup and less cabling
Features:
- 15 mm pixel pitch
- 256 individually controllable pixels
- DMX Control
- P3 Control with VideoMapping
- Hybrid DMX + P3 Control (toggle in real-time between DMX, PixelMapping and VideoMapping using P3 Switch channel)
- 5000 nits of brightness
- 15000 lumen per square meter
- High-quality 16-bit per color image processing technology
- Pixel-level brightness and color calibration for optimal image quality and matching between products
- Intuitive mapping and addressing via P3 System Controller
- Combined power/data input (single cable for power and data input)
- Combined power/data thru (to daisy-chain multiple VC-Grids)
- Supported by integrated power and data processor (P3 PowerPort 1500 or DMX PowerPort 375) and simple cabling system
- Custom designs available on request (pixel pitch and module dimensions)
- Compatible with VC-Strip 15
Specifications:
- Physical:
- Length: 240 mm (9.5 in.) *
- Width: 240 mm (9.5 in.) *
- Height: 15 mm (0.6 in.)
- Weight: 311 g (0.7 lbs.)
- *Including 5 mm (0.2 in.) board-to-board gap
- Control and Programming:
- Control resolution: 16-bit (P3) or 8-bit (DMX) control of each color
- Control options: Martin P3™ System Controller (via Martin P3 PowerPort™) or DMX
- Protocol detection: Automatic
- Setting and addressing: Martin P3™ System Controller or RDM-compliant controller
- Color and intensity calibration: Pixel-level
- DMX compliance: USITT DMX512-A
- RDM compliance: ANSI/ESTA E1.20
- Firmware update: Via Martin P3™ System Controller
- Control modes, direct DMX control: Module and QuadPixel
- DMX channels, direct DMX control: 3/192
- Control modes, DMX via P3: P3 Intensity, P3 RGB, P3 Basic, P3 Hybrid, and P3 PixelMap
- DMX channels, DMX via P3: Wide range of options from 1 to 771
- Control/User Interface:
- Device status: Multi-color visual indication
- Device test and reset: Pushbutton to call up local test patterns and reset device
- Optics:
- Minimum LED lifetime: 50,000 hours (to >70% luminous output)*
- Binning: Tight color and flux binning
- Calibration: Full Gamut Pixel Calibration
- *Figure obtained under manufacturer's test conditions.
- Photometric Data:
- Color resolution: 16 bits per color (48 bits per pixel)
- Viewing angle: 120° x 120° (half-peak)
- Pitch (pixel center-to-center): 15.00 mm
- Total output, calibrated mode: 5000 nits (fixtures placed in continuous surface)
- Luminous output, calibrated mode: 15000 lumen per square meter
- LED Array VC-Grid 15 16x16: 16 x 16
- * All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.
- P3 Video Processing:
- Brightness control
- Gamma correction and control
- Color temperature control
- Color space control
- Calibration processing
- Synchronization
- Signal Protocol:
- Martin P3 (via Martin P3™ PowerPort) or DMX (direct)
- Construction:
- Base: Black FR4 circuit board
- Transparency through module (unmasked area): 0%
- Protection rating: IP20
- RoHS compliant
- Installation:
- Mounting: Mounting holes in module
- Orientation: Any
- Maximum number of VC-Grid™ 16x16 15 modules per daisy-chain: 4
- Connections:
- Power & data input: 4-pin Molex connector
- Power & data thru: 4-pin Molex connector
- Electrical:
- Nominal input voltage: 48 VDC +/- 4%
- Power supply options: Martin P3™ PowerPort 1500, DMX PowerPort 375, Martin™ IP66 PSU 240W, or generic 48 VDC PSU
- Maximum power consumption, all LEDs at full intensity, VC-Grid 15 16x16: 50 W
- Thermal:
- Cooling: Convection
- Maximum ambient temperature (Ta max.): 45° C
- Minimum ambient temperature (Ta min.): -20° C
- Maximum total heat dissipation, calculated, +/- 10%: VC-Grid 15 16x16: 171 BTU/hr
- Environmental:
- RoHS: Compliant
- REACH: Compliant
- WEEE: Compliant
- Proposition 65: Compliant
- Approvals:
- EU safety: EN 60950
- EU EMC: EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3
- US safety: ANSI/UL 60950-1
- Canadian safety: CSA C22.2 No. 60950-1
- Physical:
- Length: 240 mm (9.5 in.) *
- Width: 240 mm (9.5 in.) *
- Height: 15 mm (0.6 in.)
- Weight: 311 g (0.7 lbs.)
- *Including 5 mm (0.2 in.) board-to-board gap
- Control and Programming:
- Control resolution: 16-bit (P3) or 8-bit (DMX) control of each color
- Control options: Martin P3™ System Controller (via Martin P3 PowerPort™) or DMX
- Protocol detection: Automatic
- Setting and addressing: Martin P3™ System Controller or RDM-compliant controller
- Color and intensity calibration: Pixel-level
- DMX compliance: USITT DMX512-A
- RDM compliance: ANSI/ESTA E1.20
- Firmware update: Via Martin P3™ System Controller
- Control modes, direct DMX control: Module and QuadPixel
- DMX channels, direct DMX control: 3/192
- Control modes, DMX via P3: P3 Intensity, P3 RGB, P3 Basic, P3 Hybrid, and P3 PixelMap
- DMX channels, DMX via P3: Wide range of options from 1 to 771
- Control/User Interface:
- Device status: Multi-color visual indication
- Device test and reset: Pushbutton to call up local test patterns and reset device
- Optics:
- Minimum LED lifetime: 50,000 hours (to >70% luminous output)*
- Binning: Tight color and flux binning
- Calibration: Full Gamut Pixel Calibration
- *Figure obtained under manufacturer's test conditions.
- Photometric Data:
- Color resolution: 16 bits per color (48 bits per pixel)
- Viewing angle: 120° x 120° (half-peak)
- Pitch (pixel center-to-center): 15.00 mm
- Total output, calibrated mode: 5000 nits (fixtures placed in continuous surface)
- Luminous output, calibrated mode: 15000 lumen per square meter
- LED Array VC-Grid 15 16x16: 16 x 16
- * All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.
- P3 Video Processing:
- Brightness control
- Gamma correction and control
- Color temperature control
- Color space control
- Calibration processing
- Synchronization
- Signal Protocol:
- Martin P3 (via Martin P3™ PowerPort) or DMX (direct)
- Construction:
- Base: Black FR4 circuit board
- Transparency through module (unmasked area): 0%
- Protection rating: IP20
- RoHS compliant
- Installation:
- Mounting: Mounting holes in module
- Orientation: Any
- Maximum number of VC-Grid™ 16x16 15 modules per daisy-chain: 4
- Connections:
- Power & data input: 4-pin Molex connector
- Power & data thru: 4-pin Molex connector
- Electrical:
- Nominal input voltage: 48 VDC +/- 4%
- Power supply options: Martin P3™ PowerPort 1500, DMX PowerPort 375, Martin™ IP66 PSU 240W, or generic 48 VDC PSU
- Maximum power consumption, all LEDs at full intensity, VC-Grid 15 16x16: 50 W
- Thermal:
- Cooling: Convection
- Maximum ambient temperature (Ta max.): 45° C
- Minimum ambient temperature (Ta min.): -20° C
- Maximum total heat dissipation, calculated, +/- 10%: VC-Grid 15 16x16: 171 BTU/hr
- Environmental:
- RoHS: Compliant
- REACH: Compliant
- WEEE: Compliant
- Proposition 65: Compliant
- Approvals:
- EU safety: EN 60950
- EU EMC: EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3
- US safety: ANSI/UL 60950-1
- Canadian safety: CSA C22.2 No. 60950-1
