Manley VOXBOX Class A Microphone Preamplifier

Manley VOXBOX Class A Microphone Preamplifier

The VOXBOX® combines the legendary Manley Mono Mic Preamp, the ELOP reborn as a lower ratio compressor, the MID EQ blown out as a full range PEAK-DIP-PEAK EQ, and a DeEsser with a second ELOP limiter at the end. Using the Direct Input, bass players often wonder why it wasn’t named the BASSBOX.

Specifications:

• MANLEY transformers w/nickel laminations in mu-metal cases
• 2 kOhm MIC INPUT Z w/High current 48V Phantom power built-in
• Hi-Z (100K) Direct Instrument Input
• LINE & INSERT INPUTS (balanced XLR & 1/4")
• PREAMP & EQ outputs LO-Z (50 Ohms)
• Transformer balanced XLR outputs
• Transformerless unbalanced 1/4"outputs
• STEREO LINK for Compressor & De-esser/Limiter
• SIDE CHAIN MONITOR for De-Esser
• Large ILLUMINATED Sifam METER with FIVE readout modes - (older units before serial number MVB**1359 shipped before 9/2003 use: 12V 1.2W FESTOON LAMPS; Manley's Part Number: VAR016C) Order spare bulbs using our parts order form. (newest units after serial number MVB**1359 shipped after 9/2003 use yellow LED lighting)
• THD + N (1KHz @ +20 dBu): 0.3%
• Maximum output: +31dBu

Mic Preaamp Section:

• Frequency Response: ±1dB 20Hz - 60KHz
• Noise Floor (A-wgt): -86 dB
• Signal to Noise Ratio: 113 dB
• Tube complement: 12AX7 & 12BH7 (or 6414)
• Gain: 40-60 dB

EQ Section:

• Frequency Response: 10 Hz - 100 kHz
• Noise Floor (A-wgt): -89 dB
• Signal to Noise Ratio: 116 dB
• Tube complement: 5751 & 12BH7 (or 6414)
• Gain: unity

General Info:

• Power Consumption: 24 Watts
• Mains Voltage Frequency: 50~ 60Hz
• Dimensions: 19" x 5.25" x 10" - occupies 3U
• Unit Weight: 14 lbs.
• Shipping weight: 21 lbs.

Operating Mains Votage:

• Units are purpose built for original destination country's mains voltage: 100V, 120V, or 220-240VAC as indicated on the serial number badge. Power transformer must be replaced in order to change mains operating voltage.
• 120VAC units may NOT be rewired to put the primaries of the power transformer in series for 220-240V operation or a large radiated field of hum will develop. If changing locations/voltages, the power transformer must be replaced with the dedicated one for the voltage at which it will operate and the mains fuse must be changed.
• Mains Fuse Value for 120VAC = 1 Amp Slo-Blo 1/4” x 1 1/4”
• Mains Fuse Value for 240VAC= 1/2 Amp Slo-Blo 1/4” x 1 1/4”