Lewitt LCT-140 AIR Matched Pair Small Diaphragm Microphones

Lewitt LCT-140 AIR Matched Pair Small Diaphragm Microphones

Capture instruments and room sounds with natural realism or mix-ready presence using the Lewitt LCT 140 AIR Stereo Pair, a matched pair of LCT 140 AIR small-diaphragm condenser microphones. Each mic provides a switchable sonic signature via two frequency curve settings—Flat maintains a linear response for true-to-source accuracy, while Air imparts a high-frequency lift to enhance clarity and polish. Additionally, an 80 Hz low-cut filter is provided to help control bass buildup.

Thanks to the 0.7" cardioid capsules, the LCT 140 AIR delivers immediate transient response and smooth sound reproduction for an array of sources such as acoustic instruments and choirs. The -12 dB pad can be engaged to prevent distortion when miking especially loud instruments. The microphone, which features a lightweight aluminum body with a gold-plated XLR 3-pin output connector, requires standard 48 VDC phantom power. The LCT 140 AIR Stereo Pair comes with two mic clips, two windscreens, and a cushioned bag with two pockets.

Switchable Sound Characteristics

The LCT 140 AIR has two sound characteristics, Air and Flat. Air delivers an open, sparkling character that's optimized for getting a great sound without spending time on postproduction. The Flat setting provides a linear frequency response for realistic, "as-it-is" reproduction of drums, strings, acoustic guitars, and choirs.

Precise Stereo Matching

Lewitt uses an extremely precise matching process to ensure no audible difference between the two mics of a stereo pair. The frequency response and sensitivity of every single microphone is measured. A measurement system controls the polarization voltage of the capsule to adjust the sensitivity, so it is the same for all LCT 140 AIR. Then, an algorithm compares the measured frequency response of each microphone and finds the perfect pairs.

Excellent Transient Response and Flexibility

Transients are the DNA of your instrument's sound. To retain the natural musicality of your instruments, the LCT 140 AIR delivers an excellent transient response. To be prepared for all eventualities, the LCT 140 AIR has an 80 Hz low-cut filter and a -12 dB pad. You won't break a sweat with loud sources, nor will you have to deal with low-frequency noise when you don't want to.

Durable and Lightweight Aluminum Housing

The LCT 140 AIR is very durable yet lightweight thanks to its CNC-machined aluminum housing. Positioning and setup become easy tasks.

Complete Stereo Pair

The LCT 140 AIR Stereo Pair comes with two snap-in mic clips, a transport bag with two pockets, and two windscreens.

Specifications

• Primary Applications
• Studio Recording
• Form Factor
• Stand/Boom Mount
• Intended Sound Sources
• Acoustic Guitar, Piano, Drums, Strings, Choir
• Sound Field
• Mono
• Operating Principle
• Pressure Gradient
• Capsule
• Condenser
• Diaphragm
• 0.7" / 17 mm
• Polar Pattern
• Cardioid
• Orientation
• End Address
• Circuitry
• Solid-State
• Pad
• -12 dB
• High-Pass Filter
• 80 Hz, 12 dB/Octave
• Tone Adjustment
• High Boost
• Gain Adjustment
• None
• Indicators
• None
• On-Board Controls
• HF, High-Pass Filter, Pad
• Windscreen
• Foam (Included)

Performance

• Frequency Range
• 20 Hz to 20 kHz
• Maximum SPL
• 135 dB SPL Peak (.5% THD)
• Impedance
• 173 Ohms
• Load Impedance
• 1000 Ohms
• Sensitivity
• -36.7 dBV/Pa
• Dynamic Range
• 115 dB A-Weighted
• Equivalent Noise Level
• 20 dB A-Weighted

Connectivity

• Output Connectors (Analog)
• 1 x XLR 3-Pin Male (on Mic)
• Headphone Connector
• None

Power

• Bus Power
• None
• Operating Voltage
• 48 V ± 4 V (Phantom Power)
• Operating Current Consumption
• 7.2 mA

Physical

• Color
• Black
• Mounting
• Mic Clip/Stand Adapter (Included)
• Included Case
• Soft Case
• Included Filters
• None
• Construction Material
• Aluminum
• Dimensions
• ø: 0.9 x L: 5.5" / ø: 2.3 x L: 14 cm
• Weight
• 2.3 oz / 65.2 g

Packaging Info

• Package Weight
• 1.305 lb
• Box Dimensions (LxWxH)
• 10.3 x 6.7 x 4.3"