JBL PD6212/43-WH 12-Inch High Sensitivity Two-Way Full-Range 40 x 30-Degree Loudspeaker - White

JBL PD6212/43-WH 12-Inch High Sensitivity Two-Way Full-Range 40 x 30-Degree Loudspeaker - White

The PD6212/43 in white is a Precision Directivity™ 40° by 30° loudspeaker designed for applications requiring high output capability with excellent pattern control. PD6212/43 can be utilized alone in music or speech systems where frequency extension to 80 Hz is adequate or combined with subwoofers to create extended bandwidth full-range systems.

The PD6212/43 is part of JBL’s broad lineup of installed sound loudspeakers, complementing the larger PD700 mid-high cabinets with a more compact size and greater low frequency extension, and supplementing the smaller AE Series cabinets with higher SPL capability and larger horns for pattern control to a lower frequency.

Features:

• 300 mm (12 in) horn-loaded LF and largeformat HF driver – high sensitivity design with high continuous
  SPL capability.
• Large PT™ Progressive Transition™ waveguides provide broad band pattern control, low distortion at high SPL levels and smooth frequency response.
• Rotatable low and high frequency waveguide allow either horizontal or vertical cabinet orientation.
• Sophisticated, steep-slope passive crossover network with switchable bi-amp/passive crossover modes.

Specifications:

• Frequency Range (-10dB): 80 Hz to 18 kHz
• Frequency Response (±3 dB): 90 Hz to 16 kHz
• Coverage Pattern: /43: 40° x 30° /64: 60° x 40° /66: 60° x 60° /95: 90° x 50°
• Crossover Modes: Bi-amp / Passive switchable
• Passive Crossover: 6th order (36 dB/oct) Linkwitz-Riley HP & LP, 850 Hz
• Transducer Power Rating (AES):
  • LF: 400 W (1600 W peak), 2 hrs. 300 W (1200 W peak), 100 hrs
  • HF: 75 W (300 W peak), 2 hrs
• System Power Rating: Passive Mode: 300 W (1200 W peak), 100 hrs
• Maximum SPL (1m):
  • LF: 137 dB-SPL
  • HF: 135 dB SPL (141 dB peak)
  • Passive Mode: 134 dB SPL (140 dB peak)
• System Sensitivity (1w @ 1m): Passive Mode: 109 dB-SPL
• LF Driver: M222-8A 300 mm (12 in) driver with 75 mm (3 in) voice coil
• HF Driver: 2453H, 38 mm (1.5 in) exit compression driver with 100 mm (4 in) voice coil
• Nominal Impedance: 8 ohms
• Enclosure: Trapezoidal with 12.5 degree side angles, 16 mm (5/8 in) exterior
• Suspension Attachment: 20 points (5 top, 5 bottom, 4 each side, 2 rear), M10 threaded hardware
• Finish: White DuraFlex™ finish.
• Optional Weather Resistant Versions: WRC for outdoor placement where the loudspeaker will be sheltered from direct exposure to the elements.
• Grille: Powder coated 14 gauge perforated steel, zinc-phosphate dipped, foam
• Input Connectors: Neutrik Speakon® NL4, plus CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop through.
• Environmental Specifications: Mil-Std 810; IP-x3 per IEC529.
• Dimensions (H x W x D in vertical orientation): 991 x 673 x 897 mm
• Net Weight (each): 79.5 kg (175 lb)
• Optional Accessories: 229-00009-01 kit of three M10 x 35 mm forged shoulder steel eyebolts.
• Nominal LF Driver Impedance: 8 ohms
• Nominal HF Driver Impedance: 8 ohms