Ik Multimedia iRig Acoustic Stage Digital Microphone
iRig Acoustic Stage is the new hi-tech solution for accurately reproducting the full sound of acoustic guitars and other instruments with studio-quality sound live on stage and in the studio. The combination of its advanced MEMS microphone and hi-quality preamp and DSP processing unit provides — for the first time ever — a break-through solution that offers hi-quality natural sound, advanced features, ease of installation, and a convenience never seen before.
Features:
- Advanced MEMS microphone clips on to sound hole
- Preamp/DSP unit
- Dramatically improves your live acoustic sound
- 1/4" AUX input with volume for piezo, magnetic pickups or other onboard electronics
- 1/4" Output with level control for amplifier or PA system
- USB audio out for recording on a computer or mobile device
- Cancel Feedback with multiple frequency feedback cancelling
- 6 tone presets
- Personal instrument calibration
- Works on any acoustic, acoustic electric or ukulele with round sound hole
- Phase switch for optimizing dual source sound
Specifications:
- Dedicated iRig Acoustic Microphone
- Microphone Type: MEMS
- Polar Pattern: omnidirectional
- Frequency Response: 30 Hz - 20 kHz, +/-3dB
- Max SPL: 130dB SPL
- Signal-to-Noise Ratio: 101 dBA
- Maximum soundboard thickness: 4mm / 0.16"
- Connections
- Dedicated iRig Acoustic Microphone Input: 2.5mm / 3/32" TS mono jack
- AUX Instrument Input Connector: 6.3mm / 1/4" TS mono jack
- AUX Instrument Input Impedance: 1 MOhms
- Analog Output Connector: 6.3mm / 1/4" TS mono jack, line-level, low impedance
- Analog Output Impedance: 50 Ohms (can drive long cables without any loss)
- Digital Output Connector: micro-USB
- DSP/Interface
- AD and DA Resolution: 32-bit
- Sampling Rate: 48 kHz
- Interface Output: USB class compliant audio output via micro-USB port
- Power: battery power (2xAA), USB bus power
- Battery Life: approximatively 12 hours of continuous usage with alkaline batteries and 15 hours with rechargeable high quality Ni-MH AA cells (2000 mAh and up)
- Dimensions
- DSP/Interface size: 101mm/3.98" x 72.3mm/2.85" x 23mm/0.91" (belt clip excluded)
- DSP/Interface weight: 99g/3.49oz (batteries excluded)
- Microphone size: 31.7mm/1.25" x 32.2mm/1.27" x 18.8mm/0.74"
- Microphone weight: 20g/0.71oz
- Microphone cable length: 150cm/59.1"
- Dedicated iRig Acoustic Microphone
- Microphone Type: MEMS
- Polar Pattern: omnidirectional
- Frequency Response: 30 Hz - 20 kHz, +/-3dB
- Max SPL: 130dB SPL
- Signal-to-Noise Ratio: 101 dBA
- Maximum soundboard thickness: 4mm / 0.16"
- Connections
- Dedicated iRig Acoustic Microphone Input: 2.5mm / 3/32" TS mono jack
- AUX Instrument Input Connector: 6.3mm / 1/4" TS mono jack
- AUX Instrument Input Impedance: 1 MOhms
- Analog Output Connector: 6.3mm / 1/4" TS mono jack, line-level, low impedance
- Analog Output Impedance: 50 Ohms (can drive long cables without any loss)
- Digital Output Connector: micro-USB
- DSP/Interface
- AD and DA Resolution: 32-bit
- Sampling Rate: 48 kHz
- Interface Output: USB class compliant audio output via micro-USB port
- Power: battery power (2xAA), USB bus power
- Battery Life: approximatively 12 hours of continuous usage with alkaline batteries and 15 hours with rechargeable high quality Ni-MH AA cells (2000 mAh and up)
- Dimensions
- DSP/Interface size: 101mm/3.98" x 72.3mm/2.85" x 23mm/0.91" (belt clip excluded)
- DSP/Interface weight: 99g/3.49oz (batteries excluded)
- Microphone size: 31.7mm/1.25" x 32.2mm/1.27" x 18.8mm/0.74"
- Microphone weight: 20g/0.71oz
- Microphone cable length: 150cm/59.1"
