IK Multimedia IP-IRIG-STRMMICPRO-IN iRig Stream Microphone Pro Audio Interface with Integrated Microphone
The original iRig Stream offered groundbreaking features that made it an overnight must-have for millions of creators. Now iRig Stream Pro takes your podcasting and streaming to an all-new level. This 24-bit, 96 kHz audio interface for iPhone, iPad, Android and Mac/PC offers an XLR mic preamp, stereo RCA, TRRS and device inputs (loopback) - plus advanced routing, convenient controls and total portability. It’s everything you need for professional quality streaming, right in the palm of your hand.
Features:
- XLR / 1/4” combo input with +48V phantom power
- Stereo line input via RCA connectors
- Headphone out with integrated mic input
- 2nd headphone/line out for cameras, mixers and more
- Up to 96 kHz / 24-bit resolution for pro-level sound
- Pre-mixes audio sources to stereo or 4 separate channels
- Loopback+ lets you mix in audio or route from app to app
- Powered by 2 AA batteries, bus power or optional PSU
- Can power your device (with optional PSU)
Specifications:
- Common:
- Type: 2 in/2out or 4 in/2out
- Conversion: 24-bit A/D, 24-bit D/A
- Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
- Power: USB bus powered. 48V operations with iOS devices require battery or DC IN. When connected to an external PSU (iRig PSU 3A, not included), iRig Stream Pro charges the connected iOS lightning device.
- Metering: 3x LEDs for overall streaming signal. Peak meter for Mic/Inst input.
- Device Connection: mini-DIN
- Dimensions: 123 mm/4.84” x 67 mm/2.63” x 40 mm/1.57”
- Weight: 146g
- Line input:
- Connector: 2x RCA (unbal.) Left/Right
- Nominal Input Level: -10 dBV
- Head Room: 10 dB - Level @ max
- Input Impedance: 16.5k Ohms
- Frequency Response: from 20 Hz to 20 kHz (-1.5 dB)
- Microphone Input:
- Microphone Input: balanced, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
- Microphone Input Level: from 3.8 mV RMS to 388 mV RMS
- Microphone Input Impedance: approx 2 kOhms
- Analog Gain Range: 40 dB
- Phantom Power: +48 V ± 4 V
- Frequency Response:
- from 20 Hz to 20 kHz (-1 dB) Gain @ min
- from 20 Hz to 20 kHz (-3 dB) Gain @ max
- Instrument Input:
- Instrument Input: unbalanced, Hi-Z, TS 1/4” Jack, Tip: signal / Shield: ground
- Instrument Input Level: from 70 mV RMS to 1.8 V RMS
- Instrument Input Impedance: 1M Ohms
- Analog Gain Range: 28 dB
- Frequency Response:
- from 20 Hz to 20 kHz (-1 dB) Gain @ min
- from 20 Hz to 20 kHz (-3 dB) Gain @ max
- Headset/Phones:
- Connector: 1/8” TRRS jack (CTIA wiring standard)
- Supply voltage: > 2,5 V
- Microphone gain: Adjustable with numbered thumbwheel
- Frequency Response: 20 Hz – 20 kHz
- Headphone Level control: numbered thumbwheel
- Battery Life:
- Phantom power On with iOS device: up to 20 hours (Alkaline batteries), with mic input connected to 3.1 mA phantom powered load
- Compatibility: iOS Devices
- Common:
- Type: 2 in/2out or 4 in/2out
- Conversion: 24-bit A/D, 24-bit D/A
- Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
- Power: USB bus powered. 48V operations with iOS devices require battery or DC IN. When connected to an external PSU (iRig PSU 3A, not included), iRig Stream Pro charges the connected iOS lightning device.
- Metering: 3x LEDs for overall streaming signal. Peak meter for Mic/Inst input.
- Device Connection: mini-DIN
- Dimensions: 123 mm/4.84” x 67 mm/2.63” x 40 mm/1.57”
- Weight: 146g
- Line input:
- Connector: 2x RCA (unbal.) Left/Right
- Nominal Input Level: -10 dBV
- Head Room: 10 dB - Level @ max
- Input Impedance: 16.5k Ohms
- Frequency Response: from 20 Hz to 20 kHz (-1.5 dB)
- Microphone Input:
- Microphone Input: balanced, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
- Microphone Input Level: from 3.8 mV RMS to 388 mV RMS
- Microphone Input Impedance: approx 2 kOhms
- Analog Gain Range: 40 dB
- Phantom Power: +48 V ± 4 V
- Frequency Response:
- from 20 Hz to 20 kHz (-1 dB) Gain @ min
- from 20 Hz to 20 kHz (-3 dB) Gain @ max
- Instrument Input:
- Instrument Input: unbalanced, Hi-Z, TS 1/4” Jack, Tip: signal / Shield: ground
- Instrument Input Level: from 70 mV RMS to 1.8 V RMS
- Instrument Input Impedance: 1M Ohms
- Analog Gain Range: 28 dB
- Frequency Response:
- from 20 Hz to 20 kHz (-1 dB) Gain @ min
- from 20 Hz to 20 kHz (-3 dB) Gain @ max
- Headset/Phones:
- Connector: 1/8” TRRS jack (CTIA wiring standard)
- Supply voltage: > 2,5 V
- Microphone gain: Adjustable with numbered thumbwheel
- Frequency Response: 20 Hz – 20 kHz
- Headphone Level control: numbered thumbwheel
- Battery Life:
- Phantom power On with iOS device: up to 20 hours (Alkaline batteries), with mic input connected to 3.1 mA phantom powered load
- Compatibility: iOS Devices
