IK Multimedia IP-IRIG-STREAMSL-IN iRig Stream Solo Easy-To-Use Streaming Audio Interface
The original iRig Stream offered groundbreaking features for today's top apps that made it an overnight must-have for millions of creators. Now iRig Stream Solo brings comparable features and connectivity to a new level of affordability. iRig Stream Solo is an easy-to-use audio interface for iPhone*, iPad and Android that lets you connect up to 3 distinct sources and mix them into your stream. Connect mixers or keyboards, your earbuds or iRig mics, and even audio played right on your device, and mix them together into a signal that’s optimized for streaming and sent straight to your favorite apps.
Features:
- Captive TRRS cable to connect to your device
- Connect a mixer, DJ setup and more via RCA inputs
- Headphone out with integrated mic input
- All signals summed to mono for streaming
- Loopback mixes incoming signals with your device’s audio
- Direct monitoring via the headphone out
- 1/8” mono Thru line output for cameras, mixers and more
- Powered by 2 AA batteries
- Works with all your favorite apps
Specifications:
- Common:
- Power: 2x AA batteries
- Metering: Battery status LED
- Device Connection: captive 1/8” / 3.5 mm TRRS jack - CTIA/AHJ wiring standard
- Dimensions: 45 x 105 x 34 mm
- Weight (without batteries): 74 g
- Line input:
- Connector: 2x RCA (unbal.) Left/Right
- Nominal Input Level: -10 dBV
- Head Room: 9 dB
- Input Impedance: 15k Ohms
- Frequency Response: from 20 Hz to 20 kHz (-3 dB)
- Headset/Phones:
- Connector: 1/8” TRRS jack (CTIA wiring standard)
- Supply voltage: >= 2,5 V
- Microphone gain: Fixed at 27 dB
- Headphone frequency response: from 20 Hz to 20 kHz (-3 dB)
- Microphone frequency response: from 50 Hz to 20 kHz (-3 dB)
- Headphone Level control: numbered thumbwheel
- Thru out:
- Connector: 1/8” TRS jack
- Frequency Response: from 20 Hz to 20 kHz (-3 dB)
- Battery Life: 50 hours (Alkaline batteries)
- Compatibility: iOS and Android Devices - Compatible with iPhone, iPad, iPod touch and Android devices with 1/8" / 3.5mm jack standard headset input (onboard or via adaptor) compliant with the CTIA/AHJ wiring standard.
- Common:
- Power: 2x AA batteries
- Metering: Battery status LED
- Device Connection: captive 1/8” / 3.5 mm TRRS jack - CTIA/AHJ wiring standard
- Dimensions: 45 x 105 x 34 mm
- Weight (without batteries): 74 g
- Line input:
- Connector: 2x RCA (unbal.) Left/Right
- Nominal Input Level: -10 dBV
- Head Room: 9 dB
- Input Impedance: 15k Ohms
- Frequency Response: from 20 Hz to 20 kHz (-3 dB)
- Headset/Phones:
- Connector: 1/8” TRRS jack (CTIA wiring standard)
- Supply voltage: >= 2,5 V
- Microphone gain: Fixed at 27 dB
- Headphone frequency response: from 20 Hz to 20 kHz (-3 dB)
- Microphone frequency response: from 50 Hz to 20 kHz (-3 dB)
- Headphone Level control: numbered thumbwheel
- Thru out:
- Connector: 1/8” TRS jack
- Frequency Response: from 20 Hz to 20 kHz (-3 dB)
- Battery Life: 50 hours (Alkaline batteries)
- Compatibility: iOS and Android Devices - Compatible with iPhone, iPad, iPod touch and Android devices with 1/8" / 3.5mm jack standard headset input (onboard or via adaptor) compliant with the CTIA/AHJ wiring standard.
