ETC LEDS4LUSTRS2 Source Four LED Series 2 Lustr Ellipsoidal Fixture Alternatives

ETC LEDS4LUSTRS2 Source Four LED Series 2 Lustr Ellipsoidal Fixture

More ETC products

Write a review Q&A SKU: TZ-LEDS4LUSTRS2 Solotech ID#: 115474
1 of 1
Unfortunately the ETC LEDS4LUSTRS2 Source Four LED Series 2 Lustr Ellipsoidal Fixture is no longer available. This page is here for reference. Check out the great alternatives on this page, or contact us to speak with one of our sales advisors about similar products.

Need help? Contact our product specialists.

View full details
Unfortunately the ETC LEDS4LUSTRS2 Source Four LED Series 2 Lustr Ellipsoidal Fixture is no longer available. This page is here for reference. Check out the great alternatives on this page, or contact us to speak with one of our sales advisors about similar products.

Need help? Contact our product specialists.

Description

ETC LEDS4LUSTRS2 Source Four LED Series 2 Lustr Ellipsoidal Fixture

Used Units sold in sets of 8

The Source Four LED Series 2 revolutionizes LED lighting. With optimized arrays and finely-tuned electronics, Series 2 offers a combination of light quality and output that cannot be matched. Source Four LED Series 2 Lustr luminaires are based on the x7 Color System, utilizing seven colors including high-output lime to achieve true, usable broad-spectrum color with a depth and feel beyond any RGB fixture. Series 2 light engines work with all Source Four lens tubes to deliver a high-quality, controllable beam of LED light. For the best results, we highly recommend that you use EDLT lens tubes. We also offer a special LED-only version of the 50° lens tube. Combine with available adapters to transform your fixture into a fully functional Fresnel or CYC light.

Features:

  • Up to nine fixtures (15A max) may be linked via power thru connector (10 fixtures total per circuit) when used with R20 Relay Module or Unison Echo Relay Panel.
  • Multiple control options, including Direct, RGB, HSIC, and console-free modes
  • 15-bit virtual dimming engine for smooth fades and minimal color shift during dimming
  • ETL Listed to UL1573; IP20 rated

Specifications:

  • Source:
    • LED details: 60 Lumileds LUXEON® Rebel LED
    • Max lumens:
      • Series 2 Lustr: 8,667
      • Series 2 Daylight HD: 13,060
      • Series 2 Tungsten HD: 11,512
    • Lumens per watt:
      • Series 2 Lustr: 51.9
      • Series 2 Daylight HD: 52.7
      • Series 2 Tungsten HD: 55.3
    • L70 rating (hours to 70% output):
      • Lustr: 54,000 hours
      • Daylight/Tungsten HD: >60,000 hours
  • Color:
    • Colors used:
      • Series 2 Lustr: Red, Amber, Lime, green, Cyan, Blue, Indigo
      • Series 2 Daylight HD: Red, Mint, Blue, Indigo
      • Series 2 Tungsten HD: Red, Red-Orange, Mint, Blue, Indigo
    • Color temperature range: Series 2 Lustr: 2,200-6,500 K*
    • Calibrated array: Yes
    • Red shift: Yes (can be disabled)
  • Optical:
    • Beam angle range: Swappable lens tubes between 5°-90°
    • Gate size: 80 mm
    • Aperture size: 6.25-14 in (depending on lens tube)
    • Pattern projection: Yes
    • Pattern size: A or B
    • Camera flicker control/Hz range: Yes: 900-25,000 Hz
    • Notes: Can be used with LED CYC and Fresnel adapters
  • Control:
    • Input method: DMX512 via 5-pin XLR
    • Protocols: DMX512/RDM
    • RDM configuration: Yes
    • UI type: LCD
    • Local control: Yes
    • Onboard presets: Yes
    • Onboard sequences: Yes
    • Onboard effects: No
    • FixtureLink: Yes
    • Notes: 15-bit virtual dimming engine
  • Electrical:
    • Voltage range: 100-240 VAC 50/60 Hz
    • Input method: Neutrik powerCON in and thru, requires power from a non-dimmable source
    • Inrush:
      • 50 A at 120 V (First half-cycle)
      • 107 A at 240 V (First half-cycle)
    • Fixtures per circuit*:
      • 9 Lustr or 7 Daylight HD/Tungsten HD
      • (15 A via power thru connector)
      • 10 Lustr or 8 Daylight HD/Tungsten HD
      • (via R20 module or Echo Relay Panel)
    • Wattage typical:
      • Series 2 Lustr: 167
      • Series 2 Daylight HD: 248
      • Series 2 Tungsten HD: 208
    • Current draw:
      • Series 2 Lustr:
        • 1.44 A at 120 V
        • 0.78 A at 240 V
      • Series 2 Daylight HD:
        • 1.75 A at 120 V
        • 0.93 A at 240 V
      • Series 2 Tungsten HD:
        • 2.08 A at 120 V
        • 0.93 A at 240 V
  • Thermal:
    • Ambient operating temp: 0°-40°C (32°-104°F)
    • Fan (controllable): Yes (yes)
    • Droop compensation: Yes
    • dB range: 22.5 dBA average at 1 m
    • BTUs/hour:
      • Series 2 Lustr: 569
      • Series 2 Daylight HD: 846
      • Series 2 Tungsten HD: 709
  • Physical:
    • Materials: Die-cast, all metal housing
    • Color options: Black, white, silver, or custom color
    • Mounting options: Yoke, cyc floor stand (sold separately)
    • IP rating: IP20
    • Weight:
      • With barrel: 8.3 kg (18.3 lb)
      • Without barrel: 6.5 kg (14.3 lb)
    • Included accessories: Hanging yoke, 1.5 m power cable, softfocus diffuser in an A-size gobo holder, gel frame, c-clamp*
    • Notes:
      • Positive locking double-clutch fixture body
      • Slot for glass or stainless steel patterns and soft focus diffuser
      • Wide accessory slot with sliding cover for motorized pattern device or iris

Reviews

Write a review

Score

Questions & Answers

Ask a question

You may also like

  • Ask the experts

    Our expert team guides customers towards the best equipment solutions, ensuring unparalleled performance and customer satisfaction.

    Ask an expert here 
  • Financing Options

    We offer flexible financing options, starting at 0% APR. Our financing plans provide customers with the opportunity to acquire top-quality audio, DJ, and lighting equipment with ease and convenience.

    Explore more financing options 
  • Rewards Program

    Join our Rewards Program today and enjoy the benefits of smart shopping!

    Visit our rewards page