Empirical Labs FATSO 2-Channel Tape Simulator Alternatives

Empirical Labs FATSO 2-Channel Tape Simulator

Write a review Q&A SKU: TZ-FATSO Solotech ID#: 95873
1 of 2
Unfortunately the Empirical Labs FATSO 2-Channel Tape Simulator is no longer available. This page is here for reference. Check out the great alternatives on this page, or contact us to speak with one of our sales advisors about similar products.

Need help? Contact our product specialists.

View full details
Unfortunately the Empirical Labs FATSO 2-Channel Tape Simulator is no longer available. This page is here for reference. Check out the great alternatives on this page, or contact us to speak with one of our sales advisors about similar products.

Need help? Contact our product specialists.

Description

Empirical Labs FATSO 2-Channel Tape Simulator

Arguably the coolest and most unique device in the Empirical Labs arsenal, the FATSO (Full Analog Tape Simulator and Optimizer) is a digitally controlled analog device that gives musicians and engineers easy access to many of the desirable characteristics exhibited by older tube and Class A electronics and magnetic tape mediums. This two channel audio processor musically integrates frequencies and transients, increasing the apparent volume while keeping tight control over peak levels. With the FATSO, recording studios and audio production facilities can enhance and soften the sound of Hardware Digital Recorders (HDRs) and Digital Audio Workstations (DAWs). Mix engineers will have the option not to have to use bulky, expensive analog tape recorders to get the warmth and sweet high end they’ve come to rely on for so many decades. Owners of DAWs and HDRs can finally put a stop to complaints about the coldness and brittle edge of their mixes and instruments. Even audiophiles can benefit from the FATSO, bringing back the warmth and ambience of LP’s and tapes to their CD players and other digital reproduction mediums.

Specifications:

  • Frequency Response – 2 Hz to 60 kHz in clean audio mode (+0, -3 dB).
  • Dynamic Range – 110 dB from maximum output (20 %THD soft clipping) to minimum output. Greater than 100 dB signal to noise.
  • Distortion – Ranges between .06% and 20% depending on mode and settings.
  • I/O – DC Coupled input and outputs.
  • Compressor Time Constants – Attack range 1ms – 60ms. Release range .05sec – 3.5 seconds. Attack and Releases are fixed by the compression type selected.
  • Power Consumption – 15 Watts Max.
  • Metal Chassis – single height 1.75″ high, 10″ deep, 19″ wide.
  • Shipping info – Box dimensions 22.5″ x 18.5″ x 3 1/4″.

Reviews

Write a review

Score

Questions & Answers

Ask a question

You may also like