DPA 4099LO Low-Sensitivity Supercardioid HiSPL Microphone
The 4099P is a complete system which includes a pair of sensitivity selected 4099 microphones on goosenecks with magnetic mounts to allow the most realistic capture of a piano. With its low profile and unobtrusive design it is perfect in closed lid scenarios for capturing true acoustic piano sound in a live setting.
Features:
- High gain-before-feedback
- Flat frequency response
- Compact, discrete size
- Excellent phase characteristic
- Detachable cable and versatile gooseneck extender
Specifications:
- Directional pattern: Supercardioid
- Principle of operation: Pressure gradient
- Cartridge type: Pre-polarized condenser
- Frequency range:
- 20Hz-20kHz
- +/- 2dB, 20cm distance: 80Hz to 15kHz with 2dB soft boost at 10 to 12kHz
- Sensitivity:
- Nominal +/- 3dB at 1kHz: 2mV/Pa
- -54dB re. 1V/Pa
- Equivalent noise level:
- A-Weighted:
- Typical: 28dB(A) re. 20½Pa
- Maximum: 31dB(A)
- S/N ratio: (A-weighted) re. 1kHz at 1Pa (94dB SPL): Typ. 66dB(A)
- Total Harmonic Distortion (THD):
- <1 % up to 123dB SPL peak
- <1 % up to 120dB SPL RMS sine
- Dynamic range: 95dB
- Max. SPL: Peak before clipping: 152dB
- Output impedance:
- From MicroDot: 30 to 40Ohms
- From DAD6001: 100Ohms
- Cable drive capability: Up to 984' / 299.93m with XLR adapter
- Output balance principle: Signal balanced with XLR adapter
- Common Mode Rejection Ratio (CMRR): > 60dB from 50Hz to 15kHz with XLR adapter
- Power supply:
- Min. 5V to max. 50V through DPA adapter for wireless systems
- 48V phantom power +/- 4V with XLR adapter
- Current consumption:
- Typ. 1.5mA (microphone)
- 3.5mA with XLR adapter
- Connector: MicroDot
- Capsule diameter: 0.2" / 5.08mm
- Microphone Length: 1.8" / 45.72mm
- Polarity: Positively increasing sound pressure produces positive-going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter)
- Temperature range: -40 to 45 deg. C / -40 to 113 deg. F
- Relative Humidity (RH): Up to 90%
- Gooseneck length: 5.5" / 139.70mm
- Directional pattern: Supercardioid
- Principle of operation: Pressure gradient
- Cartridge type: Pre-polarized condenser
- Frequency range:
- 20Hz-20kHz
- +/- 2dB, 20cm distance: 80Hz to 15kHz with 2dB soft boost at 10 to 12kHz
- Sensitivity:
- Nominal +/- 3dB at 1kHz: 2mV/Pa
- -54dB re. 1V/Pa
- Equivalent noise level:
- A-Weighted:
- Typical: 28dB(A) re. 20½Pa
- Maximum: 31dB(A)
- S/N ratio: (A-weighted) re. 1kHz at 1Pa (94dB SPL): Typ. 66dB(A)
- Total Harmonic Distortion (THD):
- <1 % up to 123dB SPL peak
- <1 % up to 120dB SPL RMS sine
- Dynamic range: 95dB
- Max. SPL: Peak before clipping: 152dB
- Output impedance:
- From MicroDot: 30 to 40Ohms
- From DAD6001: 100Ohms
- Cable drive capability: Up to 984' / 299.93m with XLR adapter
- Output balance principle: Signal balanced with XLR adapter
- Common Mode Rejection Ratio (CMRR): > 60dB from 50Hz to 15kHz with XLR adapter
- Power supply:
- Min. 5V to max. 50V through DPA adapter for wireless systems
- 48V phantom power +/- 4V with XLR adapter
- Current consumption:
- Typ. 1.5mA (microphone)
- 3.5mA with XLR adapter
- Connector: MicroDot
- Capsule diameter: 0.2" / 5.08mm
- Microphone Length: 1.8" / 45.72mm
- Polarity: Positively increasing sound pressure produces positive-going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter)
- Temperature range: -40 to 45 deg. C / -40 to 113 deg. F
- Relative Humidity (RH): Up to 90%
- Gooseneck length: 5.5" / 139.70mm