D&B Audiotechnik Z4011.000 DS20 Audio Network Bridge

The DS20 Audio network bridge interfaces between Milan networks and AES3 digital audio signals, while also providing distribution of Ethernet control data. This 1 RU device integrates directly into the d&b system approach, positioned in front of the amplifiers within the signal chain, and is ideally suited to both mobile and installation environments. The DS20 sends metadata including Milan channel labels and cabling information via the AES3 channel stream to the d&b four channel amplifiers. As well as providing an interface from the Milan audio network to the digital inputs of the d&b amplifiers via Ethernet, the DS20 provides four digital AES3 input channels for applications such as a break in from a Front of Hoe console.

The DS20 incorporates a fully AVB-enabled integrated 5-port switch, offering a primary and redundant network for the Milan protocol. This provides extended connectivity for a laptop to control the d&b amplifiers using the R1 Remote control software via the OCA (Open Control Architecture) protocol. Using the DS20 Audio network bridge, audio signals and remote control data can be combined using a single Ethernet cable. The front panel of the DS20 is designed to match the I/O panel of the d&b Touring rack assemblies. This ensures a simple integration within existing system configurations. The DS20 features a power supply suitable for mains voltages 100 V – 240 V, 50 – 60 Hz, with Overvoltage protection of up to 400 V.

Features:

• Interface between the Milan audio transport protocol via Ethernet and the AES3 inputs of the d&b amplifiers
• Integrated 5-port Ethernet switch provides extended connectivity and is full AVB-enabled
• Four AES3 input channels for extended flexibility
• In bypass mode, the DS20 acts as an AES3 distribution device
• Milan metadata including channel label information sent through
• AES3 stream to the four channel d&b amplifiers

Specifications:

• Controls and indicators:
  • BYPASSED/SUBSCRIBED (RX Subscription): LED indicator green
  • IDENTIFY/SYNC ERROR: LED indicator red
  • Mode: Push-button
  • Switch port modes/Audio loss: RGB LEDs
• Digital inputs:
  • DIGITAL IN:
    • 4 channel (2 x AES3)
    • 3 pin XLR female
  • Sampling: 32 - 192 kHz
  • Synchronization: Sampling Rate Converter (SRC)
• Digital outputs:
  • DIGITAL OUT:
    • 16 channels (8 x AES3)
    • 3 pin XLR male
  • Sampling: 48 / 96 kHz
  • Synchronization: Milan network
• Network:
  • Connectors:
    • etherCON®
    • built-in 5-port AVB Ethernet switch
    • 100/1000 Mbit
• Operating conditions:
  • Humidity (rel.), long term average: 70%
  • Storage temperature: –20 °C ... 70 °C / –4 °F ... 158 °F
  • Temperature range: 0 °C ... 40 °C / 32 °F ... 104 °F
• Power supply:
  • Mains connector: powerCON®
  • Overvoltage protection: Up to 400 VAC
  • Rated mains voltage: 100 - 240 V, 50 - 60 Hz
• Dimensions / weight:
  • Dimensions (H x W x D):
    • 1 RU x 19“ x 232 mm
    • 1 RU x 19" x 9.1"
  • Weight3.8 kg / 8.37 lb