D&B Audiotechnik Z2830.500 40D Amplifier - US/CA/KR Version
The 2 RU 40D amplifier provides the power density required for installation purposes while the powerful signal processing extends the level of functionality of the on-board features. This device contains extended input management functionalities with separate Input Gain control for each input channel, General Purpose Inputs/Outputs (GPIO) and a General Fault connector. Enhanced system status monitoring functions such as Input and Load monitoring ensure suitability in an emergency situation. The user interface of the amplifier consists a 4.3" color touchscreen providing comprehensive information of the device configuration and enhanced status monitoring.
Specifications:
- Digital Signal Processing:
- Equalizer: 2 x 16-band PEQ/notch/shelving/asymmetric
- Latency analog and digital inputs: 0.3 ms
- Delay setting: 0.3 ms - 10 s
- Configurations: current d&b loudspeakers (except GSL, SL-SUB, J-Series, M2)
- Function switches: d&b loudspeaker specific circuits
- Frequency generator: Pink noise or Sine wave 10 Hz - 20 kHz
- Controls and indicators:
- Status information and monitoring: Color touchscreen, 4.3" 480 x 272 pixel
- Connectors:
- Sampling frequency Digital AES/EBU: 44.1, 48, 96, 192 kHz
- INPUT ANALOG (A1 - A4): 3-pin Phoenix Euroblock male
- ANALOG LINK (A1 - A4): 3-pin Phoenix Euroblock male
- INPUT DIGITAL (D1/2, D3/4): 3-pin Phoenix Euroblock male, AES3
- DIGITAL LINK (Output): 3-pin Phoenix Euroblock male, AES3
- Speaker outputs A/B/C/D: 2 x 4-pin Phoenix Euroblock female
- Mix TOP/SUB / 2-Way Active output A/B and C/D: 2 x 4-pin Phoenix Euroblock female
- GPIO (General Purpose Input Output): 1 x 14-pin Phoenix Euroblock male
- ETHERNET: 2 x RJ 45, 1 Gbit / 100 Mbit
- Mains connector: powerCON® TRUE1 TOP
- FAULT: 1 x 3-pin Phoenix Euroblock male
- Power supply:
- Type: Autosensing switch mode power supply with active Power Factor Correction (PFC)
- Rated mains voltage: 100 - 127 / 208 - 240 V, 50 - 60 Hz
- Dimensions / weight:
- Dimensions (H x W x D): 2 RU x 19" x 465 mm/18.3"
- Weight:
- 13,3 kg
- 29,3 lb
- Equalizer: 2 x 16-band PEQ/notch/shelving/asymmetric
- Latency analog and digital inputs: 0.3 ms
- Delay setting: 0.3 ms - 10 s
- Configurations: current d&b loudspeakers (except GSL, SL-SUB, J-Series, M2)
- Function switches: d&b loudspeaker specific circuits
- Frequency generator: Pink noise or Sine wave 10 Hz - 20 kHz
- Status information and monitoring: Color touchscreen, 4.3" 480 x 272 pixel
- Sampling frequency Digital AES/EBU: 44.1, 48, 96, 192 kHz
- INPUT ANALOG (A1 - A4): 3-pin Phoenix Euroblock male
- ANALOG LINK (A1 - A4): 3-pin Phoenix Euroblock male
- INPUT DIGITAL (D1/2, D3/4): 3-pin Phoenix Euroblock male, AES3
- DIGITAL LINK (Output): 3-pin Phoenix Euroblock male, AES3
- Speaker outputs A/B/C/D: 2 x 4-pin Phoenix Euroblock female
- Mix TOP/SUB / 2-Way Active output A/B and C/D: 2 x 4-pin Phoenix Euroblock female
- GPIO (General Purpose Input Output): 1 x 14-pin Phoenix Euroblock male
- ETHERNET: 2 x RJ 45, 1 Gbit / 100 Mbit
- Mains connector: powerCON® TRUE1 TOP
- FAULT: 1 x 3-pin Phoenix Euroblock male
- Type: Autosensing switch mode power supply with active Power Factor Correction (PFC)
- Rated mains voltage: 100 - 127 / 208 - 240 V, 50 - 60 Hz
- Dimensions (H x W x D): 2 RU x 19" x 465 mm/18.3"
- Weight:
- 13,3 kg
- 29,3 lb
