D&B Audiotechnik Z5024-000-00 Loudspeaker Stand Adapter

This adapter is used to mount loudspeakers on to the standard 35 mm diameter column commonly used for loudspeaker stands.

• − Direct assembly to E1 or E3 loudspeakers
• − Direct assembly to 2 x E3 using Z5031 E3 Standard bracket
• − Z5023 02 Flying bracket
• − Z0124 E1 Vertical bracket
• − Z0126 E1 Horizontal bracket
• − Z5032 E3 Swivel bracket
• − Z5028 E3/Ci80 Horizontal bracket
• − Z5030 E3 x 2 Angle bracket
• − Z5052 Flying bracket CI6/CI9
• − Z5150 Q Swivel bracket

Part list Z5024 Loudspeaker stand adapter

• − 1 x Z5024 Adapter für Boxenstativ
• − 3 x Fixing bolt M8x16
• − 2 x Hex head screw DIN 933-M8x18-8.8
• − 2 x Spring washer 8.2
• − 2 x Plain washer 8.4

Weight Z5024 Loudspeaker stand adapter

• 0.6 kg/1.3 lb

Assembly

Each adapter is supplied with two M8x18mm hex head screws, spring and plain washers. The adapter is either fitted to the accessories described above or directly fitted to E1 or E3 loudspeakers.

Fixing screws longer than those supplied must not be used. Longer screws can punch in the E1 or E3 threaded inserts and breach the cabinet’s air-tight seal. The adapter may also be fitted using two M8 Safety eyebolts (Q9031).

Alternatively the adapter can be fitted using the two fixing bolts. In this case the spring and plain washers are not used.

Operation

The horizontal angle can be set by slackening the fixing bolt. After horizontal alignment retighten the fixing bolt.