Crown DCI4X300D 4 Channel 300 Watt 4 Ohm Power Amplifier with Dante - 70/100 Volt

Crown DCI4X300D 4 Channel 300 Watt 4 Ohm Power Amplifier with Dante - 70/100 Volt

The Crown DCi 4/300DA DriveCore Install DA Series is a 4-channel power amplifier equipped with Dante / AES67 networked audio capabilities and integrated DSP. With an output of 300W per channel, this amplifier supports 2-, 4-, 8-, and 16-Ohm speakers or 70/100Vrms systems. Channels can be bridged for higher power applications, such as subwoofers. Designed for professional AV installations, it features advanced capabilities including compatibility with Dante Domain Manager and redundant network connections for reliability. The HiQnet Audio Architect software enables remote configuration, monitoring, and control, while a programmable GPIO port provides additional customization options for third-party systems.

Features:

• Integrated Dante / AES67 network audio compatibility
• Network configuration, monitoring, and control via HiQnet Audio Architect
• Continuous load monitoring
• Onboard DSP with limiters, compressor, delay, EQ, and crossover
• Programmable General Purpose I/O port for enhanced functionality
• 300W per channel with support for 70V/100V systems
• Bridgeable channel pairs for high-power applications
• Front panel indicators for easy monitoring

Specifications:

• Inputs: 3-pin block connectors
• Outputs: Terminal strips
• Output Power:
  • Dual Mode:
    • @ 2 Ohms: 150 W (per channel)
    • @ 4 Ohms: 300 W (per channel)
    • @ 8 Ohms: 300 W (per channel)
    • @ 16 Ohms: 150 W (per channel)
    • @ 70 Vrms: 300 W (per channel)
    • @ 100 Vrms: 300 W (per channel)
  • Bridge Mono Mode:
    • @ 4 Ohms: 300 W
    • @ 8 Ohms: 600 W
    • @ 16 Ohms: 600 W
    • @ 140 Vrms: 600 W
    • @ 200 Vrms: 600 W
• Voltage Gain: 34 dB
• Frequency Response: 20 Hz to 20 kHz (±0.25 dB at 8 Ohms)
• Signal to Noise Ratio: >108 dB (ref. rated power, 8 Ohms, 20 Hz to 20 kHz)
• Total Harmonic Distortion: <0.35% (at full-rated power, 20 Hz to 20 kHz)
• Cooling: Continuously variable-speed forced air (front-to-back airflow)
• AC Mains Requirement: 100 to 240 VAC, 50/60 Hz (±10%)
• Dimensions: 14.3" / 36.2 cm
• Weight: 20.1 lb / 9.1 kg