Crown CTS1200 Install Amplifier 600 Watt at 8 Ohms
Crown’s CTs Series amplifiers provide exceptional performance, flexibility and value for installed sound applications. CTS Series amplifiers feature independent selection of high and low impedance operation for a specific channel, plus power levels and features that were carefully chosen to match the requirements of fixed install design. Easy integration with HiQnet™ and CobraNet™ allows CTs amplifiers to deliver a comprehensive lineup of monitoring and control features along with digital audio transport for an award-winning digital audio solution.
Features:
- High power density. All two channel models and four channel model in a 2RU chassis, eight channel model in a 3RU chassis
- Crown Switching Power Supply for lighter weight
- Selectable "Constant-Voltage" or low-impedance (4/8 ohm) operation per channel on 2-channel models, and per channel-pair on 4 and 8-channel models
- 100V direct outputs on CTs 2000, CTs 3000, CTs 4200, and CTs 8200
- Legendary Crown class-I (BCA) and AB+B output topologies offer the best in amplifier reliability
- 4 and 8-channel models offer perfect independent power solutions for multi-zoned systems
- "FIT" (Fault Isolation Topology) circuitry on 4 and 8-channel models isolates fault conditions without affecting neighboring channels
- Comprehensive array of indicators provide accurate diagnostics
- Two-channel models are fully PIP2-compatible. Multi-channel models accept MC accessory modules.
Specifications:
- Channels: 2
- Sensitivity: 1.4 V
- Signal to Noise Ratio (below rated power 20 Hz to 20 kHz, A-Weighted): 105 dB
- THD (full rated power, 20 Hz - 20 kHz): < 0.1%
- Damping Factor (10 Hz to 100 Hz): <3000
- Frequency Response (at 1W, 4/8 ohms): +/- 0.25 dB
- Crosstalk (below rated power) 20 Hz to 1 kHz: > 80 dB
- Common Mode Rejection (20 Hz to 1 kHz): > 50 dB
- Maximum Input Level before Compression: +20dBu
- Load Impedance: 70V, 100V (2-16 Ohms)
- Voltage Gain (at maximum level settings) (8/4 ohm operation): 35:1 (31 dB)
- Power Draw at Idle (120VAC mains: standby mode): 24W
- Dimensions: 3.5" x 19" x 14.25"
- Weight: 22.8lbs
- Shipping Weight: 27.7 lbs
- Channels: 2
- Sensitivity: 1.4 V
- Signal to Noise Ratio (below rated power 20 Hz to 20 kHz, A-Weighted): 105 dB
- THD (full rated power, 20 Hz - 20 kHz): < 0.1%
- Damping Factor (10 Hz to 100 Hz): <3000
- Frequency Response (at 1W, 4/8 ohms): +/- 0.25 dB
- Crosstalk (below rated power) 20 Hz to 1 kHz: > 80 dB
- Common Mode Rejection (20 Hz to 1 kHz): > 50 dB
- Maximum Input Level before Compression: +20dBu
- Load Impedance: 70V, 100V (2-16 Ohms)
- Voltage Gain (at maximum level settings) (8/4 ohm operation): 35:1 (31 dB)
- Power Draw at Idle (120VAC mains: standby mode): 24W
- Dimensions: 3.5" x 19" x 14.25"
- Weight: 22.8lbs
- Shipping Weight: 27.7 lbs
