Crown CTD-2125CT 2X125W DANTE AMP US VER
Crown CTD-2125CT 2X125W DANTE AMP US VER
SKU: CRN-CTD-2125-US
Available options
Description
Crown CTD-2125CT 2X125W DANTE AMP US VER
Crown ComTech D Series amplifiers are designed for versatility, flexibility, and ease of installation. With both Dante inputs and outputs, built-in DSP, power sharing, Lo-Z/Hi-Z switching, and a simple to use web configuration interface, ComTech D amplifiers are ideal for meeting the changing demands of diverse installed audio applications.
The CTD-2125 delivers 125 watts per channel of legendary Crown amplification when all channels are driven equally. Asymmetrical power sharing enables the two channels to share the full 250W in any ratio, offering unparalleled flexibility.
Built-in DSP allows outputs to be tuned specifically for every application and provides the ability to create custom speaker tunings. Factory JBL SpeakerTunings for select JBL models, including Control 400 Series ceiling speakers, are included to simplify the optimization of an all-HARMAN solution.
The amplifier can be configured through the intuitive web interface with any computer or tablet and without the need to install proprietary software. It uses HARMAN's HControl protocol to communicate natively with BSS OMNI Processors or AMX MUSE Automation Controllers and includes an easy-to-use API for integration with 3rd-party control systems.
This compact 1RU, ½ rack width device can be installed in a rack, under a table, or on a wall using the included mounting hardware.
Features
- Dante Inputs and Outputs
- DSP for Room Tuning and Speaker Tuning
- Power Sharing
- WebUI Configuration
- Lo-Z/Hi-Z switchable outputs
- Compact Design
- Factory JBL SpeakerTunings
- Pilot Tone & Load Monitoring
- Source Priority Switching
- GPIO Interface
- HControl
Specifications
|
Crosstalk (below rated power, 20 Hz to 1 kHz) |
55 dB |
|
Damping Factor (20 Hz to 100 Hz) |
≥100 |
|
Digital Signal Processing |
48 kHz |
|
Frequency Response @ 4/8 Ω |
20 Hz – 20 kHz ±0.5 dB |
|
Intermodulation Distortion (60 Hz and 7 kHz at 4:1, from -30 dB to full rated power) |
≤0.35% |
|
Input Impedance |
20 kΩ, Balanced |
|
Input Sensitivity @ 8 Ω |
1.12 Vrms (2ch) |
|
Maximum Fan Noise (Red. dB SPL @ 1 m) |
48 dB |
|
Maximum Input Level |
+20 dBu |
|
Signal-to-Noise Ratio (20 Hz to 20 kHz, A-weighted, below rated power) |
104 dB Analog, 113 dB Dante |
|
THD+N @ 4/8 Ω, 70V/100V, 1 dB below rated power |
≤0.1% |
|
Voltage Gain (8 Ω, 1 kHz, Vin = 100 mV) |
32 dB |
|
100V Output Voltage (loaded to 250W/500W) |
93 Vrms |
2. Connectors
|
Connector Type |
CTD-2125 |
|---|---|
|
Analog Audio Input |
3.5 mm Phoenix Terminal Block Connector |
|
Digital Audio Input/Output (Dante/AES67) |
2 × RJ45 |
|
Speaker Output |
5.08 mm Phoenix Terminal Block Connector |
|
GPI |
4 In, 6-pin 3.5 mm Phoenix Terminal Block Connector |
|
Fault Relay Output |
NO, COM, NC |
|
Power Standard |
IEC |