Crestron HD-TX1-F HDMI Fiber Transmitter

Crestron HD-TX1-F HDMI Fiber Transmitter

Crestron® HDMI® over Fiber Transmitters and Receivers deliver professional-grade digital HD AV signal extension for use in the home, classroom, auditorium, or corporate boardroom. Without any special setup or configuration, the HD-TX1-F transmitter works with an HD-RX1-F receiver to enable wire runs up to 1000 feet (300 m) over a single multimode fiber strand. The use of fiber not only facilitates long wire runs, but is also ideal for wiring to outdoor devices and between buildings, providing optical isolation against ground loops, lightning surges, and other electrical disturbances. The HD-TX1-F simultaneously handles high-definition digital video and audio, RS-232, and IR signals.

Robust HD Signal Extension

Crestron HDMI over Fiber technology delivers ultra-reliable extension of uncompressed video and computer signals. The HD-TX1-F handles video resolutions up to Full HD 1080p60, and computer resolutions up to UXGA and WUXGA, with support for HDCP and Deep Color. Audio capabilities include support for Dolby Digital®, DTS®, and uncompressed 7.1 linear PCM. In addition to HDMI, the HD-TX1-F is also compatible with DVI and Dual-Mode DisplayPort sources using an appropriate adapter or interface cable.

...And Control Too!

In addition to video and audio, the HD-TX1-F provides for the extension of control signals for a true one-wire AV interface solution. Both IR and bidirectional RS-232 control signals may be routed using the HD-TX1-F to control a display device or other equipment.

Comprehensive without Complication

Crestron HDMI over Fiber affords a very dependable signal extension solution that's simple to implement. No special configuration or programming is required — just connect your source and display and enjoy high-quality HD video and audio from across the room — or from another entire building. The HD-TX1-F is housed in an attractive, compact enclosure, with provisions for mounting to any flat surface, or to one rail of a 19" EIA equipment rack.

Crestron offers the fiber optic cable, connectors, and termination kit for a complete, easy wiring solution. A range of professional AV interface cables and wall plates is also available to complement the HD-TX1-F for a total custom installation solution.[1]

Key Features

• Extends uncompressed digital video, audio, and control signals 1000 feet (300 m) over a single multimode fiber
• Works reliably without any programming or configuration
• Supports HDMI® with Deep Color
• Also compatible with DVI and Dual-Mode DisplayPort
• Supports 7.1 channel lossless audio up to 48 kHz
• Supports DTS® and Dolby Digital® encoded audio
• Handles resolutions up to WUXGA 1920x1200 and HD 1080p60
• Passes CEC, EDID, and HDCP
• Includes universal IR repeater up to 192 kHz
• Extends bidirectional RS-232 up to 115k Baud
• Provides electrical isolation for outdoor runs
• 12VDC universal power pack included

Video

• Input Signal Types
• HDMI® w/Deep Color (DVI & Dual-Mode DisplayPort compatible [3])
• Resolutions, Progressive
• 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@25Hz (1080p25), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1080@24Hz, 2048x1152@60Hz, plus any other resolution allowed by HDMI up to 165 MHz pixel clock
• Resolutions, Interlaced
• 720x480@30Hz (480i), 720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus any other resolution allowed by HDMI up to 165 MHz pixel clock

Audio

• Input Signal Types
• HDMI (Dual-Mode DisplayPort compatible [3])
• Formats
• Dolby Digital®, Dolby Digital EX, DTS®, DTS-ES, DTS 96/24, LPCM up to 8 channels
• Sampling Rate
• Up to 48 kHz

Communications

• Fiber
• 50/125 or 62.5/125 µm multi-mode optical fiber, 1000 ft (300 m) cable length, 850 nm & 1310 nm transmit, 1550 nm receive [2]

Connectors

• IR
• (1) 2-pin 3.5 mm detachable terminal block;
• IR/Serial repeater input port;
• IR output up to 192 kHz;
• 1-way serial TTL/RS-232 (0-5 Volts) up to 19200 baud
• HDMI IN
• (1) 19-pin Type A HDMI female;
• HDMI digital video/audio input (DVI & Dual-Mode DisplayPort compatible [3])
• COM
• (1) 3-pin 3.5 mm detachable terminal block;
• Bidirectional RS-232 port;
• Up to 115.2k baud, software handshaking support
• G
• (1) 6-32 screw, chassis ground lug
• MM OPTICAL
• (1) SC female optical fiber connector;
• Multimode fiber output;
• Connects to MM OPTICAL port of an HD-RX1-F receiver via CresFiber 8G fiber optic cable [2]
• 12VDC 0.5A
• (1) 2.5 x 5.5 mm DC power connector;
• 12 Volt DC power input;
• PW-1205RU power pack included
• Note: Mini USB port is for factory use only.

Indicators

• Power
• (1) Green LED, indicates operating power supplied via external power pack

Power Requirements

• Power Pack
• 0.5 Amps @ 12 Volts DC;
• 100-240 Volts AC, 50/60 Hz power pack, model PW-1205RU, included

Environmental

• Temperature
• 32° to 104° F (0° to 40° C)
• Humidity
• 10% to 90% RH (non-condensing)

Enclosure

• Chassis
• Aluminum w/polycarbonate label overlay and (4) integral mounting flanges
• Mounting
• Freestanding, surface mount, or attach to a single rack rail

Dimensions

• Height
• 5.92 in (150 mm)
• Width
• 3.91 in (100 mm)
• Depth
• 1.43 in (37 mm)

Weight

• 14.7 oz (416 g)