Coda Audio LINUS14D 4X Channel Audio Amplifier 3500-Watt

The LINUS14D is a four channel DSP, network, comparator and amplifier delivering 4x 3500 W of clean power in a light weight 19”/2U package. The 4 audio inputs are selectable from analog, LiNET digital audio or DANTE audio network and are routable to any of the 4 outputs via the input matrix.

Features:

• Very high output power (4x 3500W @ 4 Ohm)
• SHARC floating point DSP @ 96 kHz
• DANTE and LiNET – 8x freely configurable digital audio signals over CAT5 cables
• 4 dynamic comparators for use with CODA Audio sensor controlled subwoofers
• LINUS Control Ethernet interface provides network control and monitoring of amplifiers
• Advanced IIR and linear-phase FIR filters
• Efficient Class D-IC design for superior sound performance
• Switch-mode power supply for 115 V / 230 V with automatic voltage selection

Specifications:

• Number of output channels: 4
• Output: stage Class D
• Internal samplerate / bit-depth: 96 kHz / 24 bit
• Signal-to-noise ratio (22 Hz - 20 kHz, 4 Ω - analogue input):
  • >108 dB (unweighted)
  • >111 dB (A-weighted)
• Signal-to-noise ratio (22 Hz - 20 kHz, 4 Ω - digital input):
  • > 116 dB (unweighted)
  • > 119 dB (A-weighted)
• Frequency response (8 Ω load, with CLEAR preset): 20 Hz–20 kHz = (+0.0 dB / -1.0 dB)
• THD+N & IMD (4 Ω load @ 1/2 output power): 20 Hz–20 kHz = < 0.005%
• Latency (input to loudspeaker output):
  • min. 2.70 ms AES/EBU input
  • min. 2.00 ms Analogue input
• Protection circuits: Inrush current limiter, Thermal limiter, Output DC, SMPS over-current, Output overload
• LED indicators: Mute status, Limit, Signal, Protection, Ethernet control active, Digital signal locked, DanteTM Power on
• Ethernet connection:
  • 2x 100 Mbps RJ45 Control
  • 1x 100 Mbps RJ45 DanteTM
• Dimensions (W x H x D): 483.5x88x454mm / 19x3.4x17.8”
• Shipping dimensions (W x H x D): 675x130x560 mm / 26.5x5.1x22”
• Net weight: 14.75 kg / 32.5 lbs.
• Shipping weight: 17.5 kg / 38.6 lbs.